Phenylene dendrimers and novel hyperbranched polyphenylenes as light emissive materials for blue OLEDs

New materials based on low-generation polyphenylene dendrimers with the light emission in the blue spectrum range were synthesized and examined for an efficient organic light emitting diodes (OLED) application. It has been shown that the ratio of p-phenylene groups with high fluorescence parameters to 1,3,5-triphenylbenzene groups with low fluorescent parameters may be the possible reason for the experimental variations of relative quantum yield of photoluminescence in the compounds explored. The quantum yield value is increased with a number of dendrimer generations up to 50–70%. The role of bromine atoms as the luminescence quenchers have been demonstrated, which is important for synthesis route choice.     

Effect of dipping solution pH values on electrostatic layer-by-layer self-assembly of side-chain azo polyelectrolyte

The effect of pH value on the electrostatic layer-by-layer self-assembly and the photo-responsive behavior of Poly{2-[4-(4-ethoxyphenylazo)phenoxy]ethyl acrylate-co-acrylic acid} (PEAPE) was studied. Results show that in the studied pH value range, the lower the pH value is, the higher is the UV-vis absorbance and the larger is the thickness of the multilayer films. FTIR studies indicate that the azo polyelectrolyte exhibits a different ionization degree in solutions with different pH values. The higher absorbance and the larger thickness of the layer-by-layer films can be attributed to the low ionization degree and the shrinkage conformation of PEAPE in the solution with low pH values. FTIR analysis also confirms that the driving force for layer-by-layer self-assembly of PEAPE and PDAC is the electrostatic interaction. __________ Translated from Acta Polymerica Sinica, 2007, 5: 440–445 [译自: 高 分子学报]     

Synthesis of perfluorinated functionalized, branched ethers

We wish to report synthesis of perfluorinated functionalized, branched ethers from their hydrocarbon analogues by direct fluorination. Yields up to 90%, with high purities, have been obtained at ambient temperature and pressure. This technique will likely develop into a new general method for producing perfluorinated, hyperbranched and dendritic polymers.     

Polymer electrolyte membranes for the direct methanol fuel cell: A review

The direct methanol fuel cell (DMFC) has the potential to replace lithium‐ion rechargeable batteries in portable electronic devices, but currently experiences significant power density and efficiency losses due to high methanol crossover through polymer electrolyte membranes (PEMs). Numerous publications document the synthesis and characterization of new PEMs for the DMFC. This article reviews this research, transport phenomena in PEMs, and experimental techniques used to evaluate new PEMs for the DMFC. Although many PEMs do not show significant improvements over Nafion®, the benchmark PEM in DMFCs, experimental results show that several new PEMs exhibit lower methanol crossover at similar proton conductivities and/or higher DMFC power densities. These results and recommendations for future research are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Parts B: Polym Phys 44: 2201–2225, 2006     

水溶性聚酯的结构和性能

由对苯二甲酸二甲酯、间苯二甲酸、间苯二甲酸二甲酯５－磺酸钠与乙二醇等共缩聚合成的ＰＥＴ型水溶性聚酯（ＷＳＰ）是一种新型的水溶性聚合物，在化纤、纺织、涂料、粘合剂、电子、油墨等领域有着广泛的应用前景．化纤领域超细纤维新材料的研究、开发和生产，迫切需要一...     

一种偶氮聚电解质在不同pH值条件下的静电逐层自组装研究

研究了一种光响应偶氮聚电解质(PEAPE)在不同pH值条件下的自组装,重点讨论了pH值对静电逐层自组装以及对光响应性能的影响.研究表明,在所研究的pH范围内,pH值越低,越有利于生成吸光度高的自组装膜,对应的自组装膜厚度也越大.红外光谱分析表明,偶氮聚电解质在不同pH溶液中存在不同的电离情况.pH值越低,用于自组装的溶液中的聚合物链上的电荷数越少,链构象越卷曲.解释了不同pH值条件下自组装膜吸光度和厚度差别的原因.     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——双层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型多羟基多臂星状超支化聚合物刷 .以 2 溴异丁基酰溴封端的超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 ) (HP Br)作为大分子引发剂 ,采用Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)催化体系 ,在丁酮与丙醇的混和溶液中 ,通过甲基丙烯酸羟乙酯(HEMA)的ATRP溶液聚合 ,得到了一系列含有大量羟基的多臂星状超支化聚合物刷 (HP g PHEMA) ,并考察了其羟基的活性 ,发现羟基还可以与苯甲酰氯发生反应 .产物的结构和热性能用1 H NMR、FTIR、GPC、TGA、DSC等进行了表征和测试 .     

壳聚糖固体聚合物电池用膜

壳聚糖是甲壳素脱乙酰基的产物，具有良好的成膜性、生物相容性、环保以及价格低廉等特点。作为一种碱性高分子膜材料，近年来已成为聚电解质研究领域中的研究热点。本文综述了壳聚糖固体聚合物电池用膜的研究现状，其改性工艺主要包括共混、化学改性、质子酸掺杂、无机盐掺杂等方法，比较了各种工艺处理后壳聚糖固体聚合物电解质膜的性能差异，并就壳聚糖固体聚合物电解质膜中离子传导机理中有待解决的问题进行探讨，并提出了进一步改进壳聚糖固体聚合物电解质膜性能的研究思路。     

聚电解质溶液中2.6-ANS探针的荧光谱研究

本文合成了2.6—ANS荧光探针分子,并在含有不同外加盐的NaPSS溶液中测定了探针的荧光发射光谱。结果表明:探针的荧光强度随Cs增大而增大,而探针光谱的最大发射波长和半波宽度随Cs增大而减小。当Cs达到一定值时,荧光谱参数与Cs关系曲线出现转折点,此时聚离了链以“类胶束”状态存在。     

不同代数超支化聚胺酯的制备及其在钕纳米粒子制备中的应用

以N，N-二羟乙基-3-胺基丙酸甲酯单体和季戊四醇（核）为原料，采用“准一步法”合成了具有端羟基的超支化聚胺酯（HPAE）。采用凝胶色谱、红外光谱、核磁共振和热重分析等对其进行了结构表征及性能探究。再以HPAE封装稀土粒子钕（Nd），制备出Nd复合纳米粒子，透射电镜（TEM）分析结果表明：随着HPAE代数增大，Nd纳米颗粒粒径越均匀，分散度越好。