Poly(vinyl chloride)-paste/clay nanocomposites: Investigation of thermal and morphological characteristics

The paper concentrates on poly(vinyl chloride) - PVC - from the point of nanocomposite characterisation through thermal degradation of samples, evolution of the changes caused by elevating temperature using TGA, FTIR and Congo Red methods combined with morphological characterisation by XRD and TEM analyses. A novel method of PVC-paste/nanocomposite preparation while processing was used. During preparation, PVC plasticizer was mixed with clay, both natural and organophilic, and the suspension was then compounded with the other components. Two factors were followed: effect of shearing alone, and in combination with temperature. As is presented, the type of nano-filler and its chemical modifier have obvious influence on final properties either thermal or morphological. Presented contribution follows previous part of investigation and brings further information from PVC-paste/nanocomposite field.     

Orientation control of perovskite thin films on glass substrates by the application of a seed layer prepared from oxide nanosheets

Orientation control of perovskite compounds was investigated by the application of a seed layer prepared from oxide nanosheets. An aqueous suspension of oxide nanosheets was prepared by the exfoliation of a layered compound of KCa₂Nb₃O₁₀ oxide grains. A seed layer composed of (TBA)Ca₂Nb₃O₁₀ nanosheets (TBA = tetrabutylammonium) was formed on a glass substrate by simply dip coating it in the suspension. Two kinds of perovskite compounds, LaNiO₃ (LNO) and Pb(Zr,Ti)O₃ (PZT) with a preferred orientation of (00l) were successfully grown on this seeded glass substrate. In this study, the relation between lattice mismatch and electrical properties is investigated. A large, oriented PZT film with a size of 5 ×4 cm shows an improved P-E hysteresis behavior by use of this orientation control.     

外力辅助分散作用下环氧树脂粘土纳米复合材料中粘土的微观结构与解离机理研究

采用不同分散方法(机械搅拌、高速均质搅拌和球磨分散)制备环氧树脂粘土纳米复合材料,研究了分散方法对不同有机粘土解离结构和纳米复合材料力学性能的影响,并在此基础上探讨了粘土的解离机理.结果表明,普通机械搅拌只能使小粒径粘土或大粒径粘土团聚体的外部片层解离;施加一定的外力(如高速均质搅拌)促进粘土团聚体分散,有利于粘土片层的解离;利用剪切摩擦作用较强的球磨法分散粘土,不同处理剂改性粘土的内外片层都可以充分解离,而有机改性剂中酸性质子的催化作用对粘土片层解离的影响不大,只要粒径足够小,片层解离的驱动力(基体弹性力、反应性等)能够克服其所受阻力(片层引力、层外基体粘性阻力、层内粘性引力等),粘土内外各片层将会同时向外迁移而解离.纳米复合材料的力学性能大大改善,冲击强度和弯曲强度分别提高近50%和8%;     

Polypropylene/polystyrene/clay blends prepared by an innovative eccentric rotor extruder based on continuous elongational flow: Analysis of morphology,rheology property,and crystallization behavior

The polypropylene (PP)/polystyrene (PS)/montmorillonite (MMT) blends were prepared by an innovative eccentric rotor extruder based on continuous elongational flow. Addition of MMT nanoparticles was found to reduce the PS droplet size and improve the compatibility of PP/PS. The MMT nanoparticles had clear intercalation and/or exfoliation structures and were located mostly at the interface of PP/PS. It was found that the intercalation and exfoliation of MMT was finished under the synergy of interfacial interaction and tensile deformation so that we called the mechanism as “MMT exfoliation mechanism induced by synergy of interface and tensile deformation”. The rheological analysis showed that incorporation of MMT led to an increase in complex viscosity to an optimum level (5 wt%), after which any further increase in MMT concentration decreased the complex viscosity. Moreover, the degree of crystallinity of blends was controlled by the heterogeneous nucleation effect of MMT and the inhibition effect of PS.     

Water permeability in MXene membranes: Process matters

Recent studies have shown impressive transport behaviors of water and ions within lamellar MXene membranes,which endows great promise in developing advanced separation application based high performance MXene membranes.However,most of the researches focused on modification of MXene nanoflakes and optimizing interlayer distance,leaving the impact of membrane fabrication process marginal.In this work,we studied the water flux of membranes made by vacuum filtration using delaminated MXene nanoflakes as the building-blocks.Our results show that the water permeability is extremely sensitive to the process,especially at the drying process,loading and deposit rate of nanoflakes(the feeding concentration).We find that the voids from less ordered stack rather than in-plane defects and interlayer galleries contribute to the large water permeability.The voids can be effectively avoided via deposition of MXene nanoflakes at a slow rate.Manipulating the stack of MXene nanoflakes during vacuum filtration and drying are critical for development of MXene membranes with desired performance for water permeation.     

Synthesis of graphene oxide and graphene quantum dots from miscanthus via ultrasound-assisted mechano-chemical cracking method

Whilst graphene materials have become increasingly popular in recent years, the followed synthesis strategies face sustainability, environmental and quality challenges. This study proposes an effective, sustainable and scalable ultrasound-assisted mechano-chemical cracking method to produce graphene oxide (GO). A typical energy crop, miscanthus, was used as a carbon precursor and pyrolysed at 1200 °C before subjecting to edge-carboxylation via ball-milling in a CO₂-induced environment. The resultant functionalised biochar was ultrasonically exfoliated in N-Methyl-2-pyrrolidone (NMP) and water to form GOs. The intermediate and end-products were characterised via X-ray diffraction (XRD), Raman, high-resolution transmission electron microscopy (HR-TEM) and atomic force microscopy (AFM) analyses. Results show that the proposed synthesis route can produce good quality and uniform GOs (8–10% monolayer), with up to 96% of GOs having three layers or lesser when NMP is used. Ultrasonication proved to be effective in propagating the self-repulsion of negatively-charged functional groups. Moreover, small amounts of graphene quantum dots were observed, illustrating the potential of producing various graphene materials via a single-step method. Whilst this study has only investigated utilising miscanthus, the current findings are promising and could expand the potential of producing good quality graphene materials from renewable sources via green synthesis routes.     

Structural and optical properties of ZnS/niobate composites synthesized by exfoliation/self-assembly processing

A new ZnS/niobate composite was first synthesized through two processes: (1) self-assembly of [Ca₂Nb₃O₁₀]_nⁿ⁻ nanosheets in Zn(NH₃)₄²⁺ solution; (2) formation of ZnS/niobate composite by adding Na₂S to the former reacting system. X-ray diffraction (XRD) result shows that the as-prepared ZnS/niobate composite can be indexed to tetrahedral symmetry with a=5.450(2) and c=16.904(7) Å. The uniform distributions of Zn, Ca, Nb, S and O element in the particles were demonstrated by scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). The optical property of the composite was characterized by photoluminescence spectra and UV-vis absorption spectra.     

Ultrafast Intercalation Enabled by Strong Solvent–Host Interactions: Understanding Solvent Effect at the Atomic Level

Solvents play an essential role in many areas of chemistry and is the cornerstone of understanding reactivity in solution‐phase reactions. Solvent effects have been widely observed in intercalation reactions; however, understanding of the influence of solvents on the thermodynamics and kinetics remains largely elusive in intercalation chemistry. Now, the solvent‐dependent kinetics of ferrocene intercalation into a layered vanadyl phosphate (VOPO₄?2 H₂O) host is presented, with a special focus on primary alcohols. From methanol to 1‐hexnaol, the intercalation rate peaks in 1‐propanol (80 times faster than the slowest case in methanol). Similar kinetics of exfoliation are also found in these solvents without ferrocene. The correlation between intercalation and exfoliation is understood at atomic level by DFT calculations, which reveal the role of pre‐intercalated solvent molecules play in intralayer interactions, interlayer expansion, and layer sliding.     

K4Nb6O17-derived photocatalysts for hydrogen evolution from water: Nanoscrolls versus nanosheets

The layered hexaniobate K₄Nb₆O₁₇ is known as a photocatalyst for methanol dehydrogenation and hydrogen evolution from water under ultraviolet (UV) light. Here we show that the activity is retained in propylammonium- (PA) or tetrabutylammonium- (TBA) stabilized H₂K₂Nb₆O₁₇ nanosheets and TBA-stabilized H₄Nb₆O₁₇ nanoscrolls that can be obtained by exfoliation of K₄Nb₆O₁₇ followed by cation exchange. The catalytic activity of the exfoliated systems is comparable to K₄Nb₆O₁₇, with scrolls being most active in water, and PA sheets giving enhanced H₂ rates due to sacrificial electron donor action of PA. Femtosecond absorption spectra for TBA scrolls and PA sheets exhibit broad features between 450 and 700 nm due to trapped holes and electrons. Electron–hole recombination follows approximately second-order kinetics, with rates of decay similar for sheets and scrolls. In addition, catalysts were characterized with UV/vis and fluorescence spectroscopy and transmission electron microscopy.     

插层材料ZnAl-LDHs的制备和应用

本文总结了锌铝层状双金属氢氧化物(ZnAl-LDHs)的基本制备方法,重点介绍了插层组装和层板剥离方面的最新进展,并阐述了ZnAl-LDHs在催化、医药、阴离子吸附和功能高分子方面的应用。