Paper-like Microfibrous Nickel Catalyst for Hydrogen Production via NH3 Decomposition in Fuel Cell Applications

Recently, miniature H2 generator to power fuel cells for portable/micro electronic devices and passenger propulsion has been the focus of intense research activities1-3. One of the strategies is to find simple CO-free H2 production with novel microreactor…     

制氢催化剂研究进展

随着化石燃料的日趋枯竭和其带来的环境问题，人们迫切需要更有效的利用化石燃料及开发清洁、价廉的新能源．氢以其储量丰富、清洁、高效、便于运输、环境友好等特点在新能源开发中脱颖而出．氢气用于燃料电池，其化学能一电能转化比内燃机高3～4倍，因此欧、美、日等国家投入了大量的人力和财力开发高效燃料电池，并且将此种电源应用于汽车、宇宙飞船和航天飞机．日本电气公司（NEC）已开发出笔记本电脑专用燃料电池．     

CoOx改性TiO2光催化剂的制备、优化及其光催化分解水析氢性能研究

利用热分解法制备了不同掺杂量的CoO_x-TiO₂系列光催化剂, 并优化了制备方法。在用XRD、TEM和XPS等技术对催化剂表征的基础上，探讨了乙醇作为电子给体时CoO_x改性对P25-TiO₂光催化分解水析氢性能的影响。本文还利用连续瞬态电流-时间响应和循环伏安法等电化学方法，考察了CoO_x-TiO₂改性系列光催化剂光照条件下电流响应强度、起始光电响应特性差别及光催化析氢电位变化等光电化学性能。光催化性能实验结果表明，适当掺杂CoO_x(110～400 ℃焙烧时最佳掺杂量约为0.4wt% Co，500 ℃焙烧时最佳掺杂量约为0.6～0.8wt% Co)能够显著地提高TiO₂析氢光催化性能，产氢速率提高2个数量级。另外在适当温度下的热处理，能够改善催化剂光催化性能(最佳处理温度为300～400 ℃)。光电化学性能评价结果表明，适当掺杂CoO_x和适当温度下焙烧能在催化剂表面形成较多的析氢活性物种——含钴复合物，能有效增强催化剂光电流响应强度，并使得析氢光还原电位向有利于析氢方向位移。高含量掺杂CoO_x会在催化剂表面形成某种碳化物物种，大量含钴复合物活性中心的出现会降低光吸收效率，增加TiO₂表面光生电子-空穴复合率而使催化剂失去析氢光催化性能。     

光催化分解水制氢研究进展

光催化分解水制氢,其学术和社会意义无疑是极其广泛而深远的.这一点至少早在科幻之父儒勒·凡尔纳(JulesVerne)生活的时代就被人们所认知,下面引用JulesVerne在1874年出版的《神秘岛》中的一段表述,让我们来再次重温这一课题的伟大意义.J.Verne写到:“Waterdecomposedintoitsprimitiveelements,anddecomposeddoubtlessbyelectricity,whichwillthenhavebecomeapowerfulandmanageableforce……Yes,myfriends,Ibelievethatwaterwillsomedaybeemployedasfuel,thathydrogenandoxygen,whichconstituteit,usedsinglyortogether,willfurnish…     

Mo对Ni/ZnO催化乙醇水蒸气重整制氢性能的影响

考察了Mo及温度对Ni/ZnO催化乙醇水蒸气重整制氢的活性、选择性和抗积炭性能的影响。结果表明，773K适量添加Mo能提高Ni/ZnO催化剂的活性和氢气选择性；Ni/ZnO及Ni-Mo/ZnO催化剂的活性随着温度的升高而提高，823K乙醇完全转化；873K时，Mo质量分数为0.83%的Ni-Mo/ZnO催化剂对氢气的选择性最高；添加Mo可以提高Ni/ZnO催化剂的抗积炭能力，从而提高该催化剂的稳定性。程序升温还原（TPR）和X射线衍射（XRD）结果表明，添加Mo有利于Ni氧化物在载体上的分散；减弱氧化态镍物种与载体之间的作用，从而提高了催化剂的活性、选择性和稳定性。     

微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.      

钙钛矿型稀土复合氧化物催化剂上一氧化碳的选择氧化

考察了在钙钛矿型稀土复合氧化物催化剂上，氢气中一氧化碳选择氧化的催化性能，发现该催化剂具有优良的催化活性和选择性。LaMnO3中的锰被铜部分取代后可以提高其催化活性，当其中的镧再被锶或钡部分取代后所得的催化剂的催化活性进一步提高。其中以La0.8Sr0.2Mn0.5Cu0.5O3的催化活性为最佳，在该催化剂上，在40 000 mL·g－1·h－1下，155 ℃时CO可被完全转化为CO2，此时的选择性达54%，与铂催化剂的性能相近。反应气中加入CO2时，CO转化率下降，但选择性有所提高；加入水蒸气则使CO的转化率和反应选择性均下降。     

分解水制氢的KNO3—I2循环之研究：Ⅲ.代替电解反应的一个子循环

本文提出了一个硫酸中间盐子循环用以代替分解水制氢的KNO_3-I_2混合循环中的电解反应,从而使原混合循环变为一个纯热化学循环。     

甲烷在活性炭上裂解制氢研究

在连续流动石英固定床反应器上研究了甲烷在活性炭上裂解制氢的反应，并对反应前后活性炭的比表面积以及孔径分布等的变化进行了测定。结果表明，甲烷在五种活性炭上的裂解行为基本相同，反应初期转化率最高，随着反应进行转化率逐渐降低直至一个平稳的状态；降低甲烷分压和增加甲烷与活性炭的接触时间可提高甲烷转化率；温度的升高有利于初始转化率的提高，但不利于活性炭的稳定性；反应后活性炭比表面积、孔容及微孔孔容都明显降低，平均孔径增大，孔径分布向中孔方向迁移，说明甲烷的裂解导致了活性炭孔特别是微孔内的炭沉积以及进一步的孔堵塞。     

高性能纳米碳材料改性Cu/ZnO/Al2O3甲醇水蒸汽重整制氢催化剂

由铜基催化剂催化甲醇水蒸汽重整制氢是有效解决车载燃料电池等制氢需求的潜在途径．但传统铜基催化剂对该反应的低温催化活性及制氢选择性均不理想．近年来碳纳米管及活性碳纤维等因具有独特的纳米孔结构、高比表面积和优异的吸附性能作为潜在的新型催化材料而备受关注．