WAXS studies on block copolymers of ethylene and propylene

Wide-angle X-ray scattering from presumed block copolymers of polypropylene (PP) and ethylene-propylene copolymer (EPR), i.e., PP-EPR and PP-EPR-PP, synthesized by sequential polymerization with δ-TiCl₃? Et₂AlCl, was examined and compared with WAXS of mechanical blends and chain-transfer mixtures of PP and EPR with comparable compositions. The peak at 2θ = 20° for both the copolymers and the mixtures was attributed to the γ modification of PP in EPR. A strong variation in the ratio of diffraction intensities I₀₄₀/I₁₁₀ of PP in block copolymers and mixtures was explained in terms of crystallite growth in different directions. Analysis of the patterns and calculation of crystallinity, crystallite size, and lattice parameters led to the conclusion that block structure existed in the prepared copolymers.     

晶性3，4－聚异戊二烯的结构研究

采用ＷＡＸＤ、ＳＡＸＳ和Ｘ－射线平板照相法研究了不同聚合条件和拉伸倍数下的晶性３，４－聚异戊二烯的结构．结果发现，降低催化体系反应速度有利于产物结晶；不同的含氮类给电子试剂对聚合物的结晶结构影响较大．取向样品随着拉伸倍数的增加结晶度和长周期增大，微晶尺寸变小．ＳＡＸＳ的散射强度计算表明，该聚合物属多分散非均一粒子体系，微孔半径在３．５－１６．４ｎｍ间．     

Preparation and optical properties of Eu(III) complexes J-aggregate formed on the surface of silver nanoparticles

Ag colloidal nanoparticles coated with Eu(TTA)₃ · 2H₂O complexes were prepared, and it was found that Eu(TTA)₃ · 2H₂O complexes J-aggregate was formed on the surface of Ag nanoparticles according to a red shift (18.2 nm) in UV–Vis spectra. However, there had similar excitation wavelength, which was attributed to existence of Ag nanoparticles. Highly luminescent properties of Ag colloidal nanoparticles were observed, and it was believed to result from low energy transfer between Eu(III) complexes and Ag and the large electromagnetic field arising from the excitation of surface plasmon polariton of Ag nanoparticles.     

纳米二氧化钛-高锰酸钾协同光催化氧化体系快速测定化学需氧量

以纳米TiO2-KMnO4协同光催化氧化体系为基础,结合分光光度法建立了一种快速测定水样中化学需氧量(COD)的简便方法。本方法具有线性范围宽、抗氯离子干扰能力强等优点。在选定的最优条件下,线性范围为0.1~320mg/L;当氯离子含量在1500mg/L以内时,相对误差小于5%。此方法适用于污染程度低的自来水、地表水或中等污染程度的工业废水中COD值的快速测定。     

PP／EPO共混体系混容性与结晶结构

WAXD方法测定表明PP/EPO共混体系的结晶度随EPO组份含量的增加而降低,晶胞参数与组份比无关,并计算了第二类晶格畸变。根据PP/EPO的DSC和扭辫实验得出在所有组成下PP/EPO共混体系是不相容的。但在非晶区可能部分相容。     

聚乙烯与聚乙烯-乙丙橡胶(聚乙烯-乙丙橡胶-聚乙烯)共混物X-射线衍射谱分析

近年来将因子分析这一多变量统计分析技术成功地用于具有加和性的谱分析中。因子分析法可正确定出混合物中含有的物种(因子)数和各物种的含量(浓度),同时可将各组分的纯光谱由混合物的光谱中分离开。聚乙烯(PE)和乙丙橡胶(EPR)的二、三元嵌段共聚物(PE-EPR、PE-EPR-PE)构成的共混物结构、形态与结晶过程研究已有     

PEO／PBHE共混体系X射线散射研究

在聚环氧乙烷(PEO)/聚双酚A羟基醚(PBHE)共混体系中PEO是一个强质子受体,而PBHE是一个强质子给体,两者极易形成氢键,十分有利于形成互容对。笔者研究了PEO/PBHE共混体系的相容性,等温及非等温结晶动力学,本文根据Vonk提出的一维电子密度相关函数,分析了PEO/PBHE的SAXS现象,求得了共混体系的结晶度,片晶层厚度,过渡层厚度及长周期等结构参数。     

聚醚醚酮酮结晶度研究

聚醚醚酮酮结晶度研究刘天西，王尚尔，张宏放，莫志深（中国科学院长春应用化学研究所高分子物理联合开放研究实验室长春１３００２２）那辉，王军佐，吴忠文（吉林大学化学系长春）关键词聚醚醚酮酮，广角Ｘ射线衍射，结晶度新型特种工程塑料聚醚醚酮酮（ＰＥＥＫＫ）具...     

热致液晶乙基纤维素与尼龙－1010共混物的研究

在自制单螺杆小型挤出机上通过熔融共混的办法，制备了不同配比（５／９５—２５／７５）的ＥＣ／Ｎｙｌｏｎ—１０１０共混物．用ＷＡＸＤ、ＤＳＣ、毛细管流变仪、力学性能测试等方法对共混物进行了研究．发现共混后尼龙－１０１０的形态结构有明显改变，其强度、模量都有提高，在高剪切速率下，共混物粘度大大降低．配比为１５８５时，这些性能的改进尤为明显．     

结晶聚合物中间层理论与实验佐证

概述了Ｆｌｏｒｙ和Ｙｏｏｎ由晶格模型出发，从理论上证明了结晶聚合物中间层的存在以及近年来许多学者采用多种实验技术确认中间层存在的事实。