227-W output all-fiberized Tm-doped fiber laser at 1908 nm

In this paper, we report that a diode-pumped thulium-doped double clad silica fiber laser can provide powers of up to 227 W at 1908 nm, corresponding to a slope efficiency of 54.3%, and an optical-to-optical efficiency of 51.2%. The output power, to the best of our knowledge, is the highest output at 1908 nm. The beam quality M2 factor is about 1.56. Also discussed in this paper is the dependence of the laser performance on fiber length.     

Pre-pumped passively Q-switched Nd:YAG/Cr:YAG microchip laser

A pre-pumped passively Q-switched Nd:YAG/Cr: YAG microchip laser is demonstrated with a peak power of 7.5 kW at pulse repetition rate of serveral kilohertzs. The full-width at half-maximum (FWHM) is 734 ps, and the pulse energy is 5.5 μJ with a fundamental spatial mode. In this system, the pre-pumped microchip laser of Nd: YAG/Cr: YAG wafer which is bonded through the thermal-bonding technique has achieved a time jitter value of 12 μs and a Q-switched amplitude instability of 1.26% (1δ) through the pre-pumped modulation technique.     

基于Phong模式的分裂Monte Carlo模拟红外室内信道脉冲响应函数

介绍了基于Phong模式的Monte Carlo方法.该方法能够对红外室内通信的重要性能参数—— 信道脉冲响应函数进行快速有效的计算，可应用于包括漫反射、镜面反射以及粗糙度介于这 两种反射之间的表面反射情形的信道中.相对于经典的有限元法，在高次反射时具有更为明 显的优势，不但计算速度快，而且计算结果也更接近真实信道环境.该方法的使用，能够为 设计高性能红外系统提供更为可靠的参数. 关键词： 红外室内通信 脉冲响应函数 分裂Monte Carlo Phong 模式     

Multi-coupler side-pumped Yb-doped double-clad fiber laser

The side-coupler of angle polished method, using angle-polished multimode fiber and optical adhesive, is used to efficiently pump an Yb-doped double-clad fiber laser. The maximum coupling efficiency of 78.6% is achieved by the side-coupler for a multimode fiber with a circular core of 200μm and a double-clad fiber with a 350/400μm D-shaped inner cladding. While laser diodes (LDs) with three side-couplers are simultaneously used as pump sources, maximum output power of 1.38 W and slope efficiency of 48.9% are demonstrated in the fiber laser system.     

一步法制备纳米氧化锌的形成机理

以氯化锌和氢氧化钠为原料,采用直接水解一步法制备了针状和球形纳米氧化锌.借助于XRD、TEM等测试手段,对纳米氧化锌粉体的制备条件和其对粒度、形貌的影响进行了分析研究.利用负离子配位多面体生长基元理论模型,解释了直接水解合成氧化锌纳米晶体的形成机理和生长习性.研究结果表明,一步法直接合成纳米氧化锌的结晶过程遵循溶解-结晶-聚集生长机理模型;ZnO为极性晶体,具有极性生长特性,其成核过程包括均相成核和非均相成核.     

超短脉冲展宽压缩系统的三维模型分析

在超短脉冲的展宽压缩系统的实验过程中,需要入射到展宽器中的光束倾斜一定角度.研究了在三维下光束倾斜入射到展宽压缩系统的情况,通过光束追迹法建立了展宽压缩系统的三维数学模型,给出了光束的水平倾斜角对展宽压缩系统的光程、群延时(GD)、群延时色散(GDD)等的影响,给出了展宽压缩系统的不同参数的相互补偿关系.通过计算,在引...     

Laser diode end-pumped Nd：YVO4 regenerative amplifier for picosecond pulses

A diode dual-end-pumped Nd:YVO4 regenerative amplifier is reported. The influence of the cavity stability on the performance of the regenerative amplifier is studied. The experimental results match well with the analysis at high pump power. The mode locking seed pulses with 15 ps pulse width and 10 nJ single pulse energy at 86 MHz are amplified up to 4.7 mJ at 1 kHz, corresponding to the maximum amplification about 0.5 × 106 , by our regenerative amplifier. And an average power of 4.7 W is obtained at the repetition rate from 1 kHz to 10 kHz.     

DVD光学头中的梯形光栅设计和表面粗糙度分析

为了符合实际加工情形 ,推导了梯形位相光栅衍射效率 ,设计其用作 DVD光学头分光束器件时的各参数 ,并分析推导了表面粗糙度对衍射效率的影响     

All-fiber linearly polarized laser oscillator by fiber coiling loss control

In this paper,we demonstrate an all-fiber linearly polarized fiber laser oscillator.The single polarization of the oscillator is achieved through the careful designing of the active fiber coiling.The relationship between fiber coiling diameter and polarization extinction ratio and optical efficiency is studied,whose results lead to an optimized system.The thermal management of the oscillator is also refined,which allows the oscillator to reach a maximum output power of44.1 W with an optical-to-optical efficiency of 57.9%.A high average polarization extinction ratio of 21.6 d B is achieved during a 2-hour stability test.The oscillator also owns a narrow 3-d B bandwidth of 0.1 nm,as well as near-diffraction-limit beam quality of M~2~ 1.14.     

沥青质杂环模型分子间相互作用及溶剂化效应的理论研究

重质油中沥青质组分易发生聚沉形成团簇,严重影响重质油的加工和利用效率,但目前对于沥青质聚沉的研究较少,其机理尚不明确。本文采用理论计算对沥青质杂环模型分子间相互作用和溶剂化效应进行研究,以此为重质油沥青质聚沉现象的研究及聚沉抑制剂的研发提供一定的数据和理论支持。(1)在M062X/6-31G(d)水平上,计算得到了11种由沥青质杂环分子片段组成的二元体系的全优化稳定构型,讨论分析了构型的几何结构、NBO电荷、Mulliken重叠布居、相互作用能和分子轨道能,得到了最稳定的两种构型。(2)在B3LYP/6-31G(d)水平上,运用SMD模型对沥青质大分子在13种溶剂中进行溶剂化效应的建模和理论计算,通过对静电溶剂化自由能(ΔGelec)、非静电溶剂化自由能(ΔGnonelec)、总溶剂化自由能(ΔGsolv)的分析可知,沥青质溶解性大小的关键在于溶剂对它的远程静电作用的大小。