Thermo-XRD-analysis of montmorillonite treated with 1,4-diaminoanthraquinone

Charcoals formed during the thermo-XRD-analysis of montmorillonite (MONT) complexes with the dye 1,4-diaminoanthraquinone (DAAQ) were investigated by using curve-fitting calculations. Five saturated dye solutions were prepared (i) in distilled water and (ii–v) in 0.1, 0.5, 1.0, and 2.0 molar HCl. Two series of dye-clay complexes were prepared by using clay suspensions of 0.6 %and of 0.006 % labeled first and second series, respectively. Five dye-clay complexes were prepared of each series by adding 25 mL of dye solution to 25 mL of clay suspension. There is no free dye in complexes of the first series, but those of the second series, which were synthesized with a high ratio between dye and clay, contain non-adsorbed dye even after five washings. Complexes of the first series are loaded with very small amounts of molecular and protonated DAAQ (5–24 mmol DAAQ per 100 g clay), and their spacings are 1.25–1.54 nm suggesting the presence of tactoids with protonated or molecular DAAQ lying parallel to the clay layers. No carbon analyses were performed to the second series complexes. In addition to tactoids with spacing of 1.32 nm, they contain tactoids with spacings of 1.81–1.96 nm, suggesting that intercalated DAAQ are lying perpendicular to the clay layers. Three types of intercalated charcoal are identified in both series during the thermal analysis, one type with a low thermal stability and two types with high thermal stabilities. Charcoals of the second series complexes preserve the geometry of the original complexes up to high temperatures.     

Soft matter dispersions with ordered inner structures, stabilized by ethoxylated phytosterols

This paper describes the formation and characterization of liquid crystalline dispersions based on the hexagonal phase of GMO/tricaprylin/water. As a stabilizer of the soft particles dispersed in the aqueous phase, a non-ionic, non-polymeric surfactant—ethoxylated phytosterol with 30 oxyethylene units (PhEO) was utilized. In contrast to Pluronic copolymers, normally utilized in the stabilization of liquid crystalline dispersions with ordered inner structure, use of such non-polymeric surfactant is not a common practice in this field. We revealed how properties of these particles, such as internal structure, size, and stability, can be rationally modified by the concentration of the stabilizing agent and processing conditions. The physical stability of the hexosomes was further examined by the LUMiFuge technique.Structural effect of PhEO solubilization on the properties of the bulk H_II mesophase system showed that phase behavior was greatly influenced following phase transitions: H_II → H_II + cubic → cubic + L_α → L_α. The decrease of hydrogen bonding of the hydroxyl and carbonyl groups of monoolein with water and simultaneous hydration of EO groups of PhEO appeared to be important for the observed behavior. The use of PhEO as a dispersant resulted in a soft matter multi-phase water dispersion with bimodal distribution of the particle population. Effective stabilization of hexosomes was obtained in an extremely narrow concentration range of PhEO (0.1–0.2 wt%), coexisting with small vesicles and disordered particles. At higher PhEO content, particles had disordered inner structure, and unilamellar and multilamellar vesicles, at the expense of hexosomes in consequence of incorporation of the dispersant into the hexosome structure. PhEO was found to induce lamellar phase formation, introducing disorder into the hexagonal LLC and reducing their domain size.Finally, hexosomes were evaluated as delivery vehicles for the therapeutic peptide desmopressin. Sustained release of this drug was observed during the first 10 h; however, permeation drastically increased in the 10–24 h range.     

Thermal Intercalation of Alkali Halides into Kaolinite

Solid state intercalation of alkali halides into kaolinite takes place by heating pressed disks of dimethylsulfoxide (DMSO)-kaolinite complex ground in different alkali halides. This reaction involves diffusion of the DMSO outside the interlayer space and the alkali halide into the interlayer space. IR and Raman spectroscopy reveal two types of intercalation complexes: (i) almost non-hydrous, obtained during thermal treatment of the DMSO complex; and (ii) hydrated, obtained by regrinding the disk in air. The strength of the hydrogen bonds between intercalated water or halide anions and the inner surface hydroxyls decreases in the order Cl⁻>Br⁻>I⁻. Chlorides penetrate the ditrigonal holes and form hydrogen bonds with the inner OH groups. This revised version was published online in August 2006 with corrections to the Cover Date.     

Spatial beam properties of combined lasers' delivery fibers

The superiority of parabolic-index fibers over step-index fibers in delivering high-beam-quality light out of incoherently combined lasers is demonstrated numerically and experimentally. By utilizing the tapered fused bundle-combining approach and connecting it with delivery fiber, we point to an efficient, rugged, all-glass, integrated, and nearly brightness-preserving device that is capable of transmitting high-quality output beams.     

Quantum interface between an electrical circuit and a single atom

We show how to bridge the divide between atomic systems and electronic devices by engineering a coupling between the motion of a single ion and the quantized electric field of a resonant circuit. Our method can be used to couple the internal state of an ion to the quantized circuit with the same speed as the internal-state coupling between two ions. All the well-known quantum information protocols linking ion internal and motional states can be converted to protocols between circuit photons and ion internal states. Our results enable quantum interfaces between solid state qubits, atomic qubits, and light, and lay the groundwork for a direct quantum connection between electrical and atomic metrology standards.     

The effect of mechanochemical treatments of sepiolite with CsCl on the calcination products

Calcination of sepiolite and of two sepiolite/CsCl mixtures, unground and air-ground was investigated by thermo-XRD-analysis. At 200 °C sepiolite, neat, mixed or air-ground with CsCl lost interparticle and zeolitic water. The framework of sepiolite persisted during the dehydration but became defected, mainly in the air-ground mixture, less in the unground mixture and little in the neat clay. At 500 °C, with the loss of bound water, the neat clay was folded and transformed into sepiolite anhydride. In sepiolite/CsCl mixtures the dehydrated variety persisted but the degree of crystal-imperfection increased in the air-ground mixture more than in the unground mixture. At 700 °C the neat clay remained crystallized, but the CsCl mixtures became amorphous. Some crystalline dehydrated sepiolite or sepiolite anhydride persisted in the unground and air-ground CsCl mixtures, respectively. At 850 °C, the neat clay crystallized into protoenstatite with some enstatite and clinoenstatite. The amorphous fraction of sepiolite in the unground sepiolite/CsCl mixtures crystallized into pollucite and forsterite and the crystalline fraction was transformed into enstatite, protoenstatite, and clinoenstatite. In the air-ground mixture, the amorphous phase was transformed into pollucite with some forsterite and the crystalline fraction into enstatite.     

Secondary adsorption of nitrobenzene and m-nitrophenol by hexadecyltrimethylammonium-montmorillonite thermo-XRD-analysis

In the present research we studied the effect of the solvent used, whether it was polar water or a non-polar organic solvent (n-hexane or n-hexadecane), on the basal-spacing and bulk structure of the sorbate-sorbent complexes obtained by the secondary adsorption of nitrobenzene and m-nitrophenol by two types of organo-montmorillonites. X-ray measured basal spacings before and after thermal treatments up to 360°C. The organo-clays were synthesized, with 41 and 90% replacement of the exchangeable Na⁺ by hexadecyltrimethylammonium (HDTMA), with mono-and bilayers of HDTMA cations in the interlayer space, labelled OC-41 and OC-90, respectively. After heating at 360°C both organo-clays showed spacing at 1.25–1.28 nm, due to the presence of interlayer-charcoal, indicating that in the preheated organo-clays the HDTMA was located in the interlayer. The thermo-XRD-analysis of Na-clay complexes showed that from organic solvents both sorbates were adsorbed on the external surface but from water they were intercalated. m-Nitrophenol complexes of both organo-clays obtained in aqueous suspensions contain water molecules. Spacings of nitrobenzene complexes of OC-41 and OC-90 and those of nitrophenol complexes of OC-41 showed that the adsorbed molecules were imbedded in cavities in the HDTMA layers. Adsorption of m-nitrophenol by OC-90 from water and n-hexane resulted in an increase of basal spacing (0.21 and 0.29 nm, respectively) suggesting the existence of a layer of nitrophenol molecules sandwiched between two parallel HDTMA layers.     

Rapid colorimetric detection of antibody-epitope recognition at a biomimetic membrane interface.

Biomolecular recognition of antigens and epitopes by antibodies is a fundamental event in the initiation of immune response and plays a central role in a variety of biochemical processes. Peptide binding requires, in many cases, presentation of the peptides at interfaces, such as protein surfaces, cellular membranes, and synthetic polymer surfaces. We describe a novel molecular system in which interactions between antibodies and peptide epitopes displayed at a biomimetic membrane interface can be detected through induction of visible, rapid color transitions. The colorimetric assembly consists of a phospholipid/polydiacetylene matrix anchoring a hydrophobic peptide displaying the epitope at its N-terminus. The colorimetric transitions observed in the assembly, corresponding to perturbation of the polydiacetylene framework, are induced only upon recognition of the displayed epitope by its specific antibody present in the aqueous solution. Significantly, the color changes occur after a single mixing step, without further chemical reactions or enzymatic processing. The new molecular system could be utilized for studying antigen-antibody interactions and peptide-protein recognition, epitope mapping, and rapid screening of biological and chemical libraries.     

Cusp Singularities in Boundary-Driven Diffusive Systems

Boundary driven diffusive systems describe a broad range of transport phenomena. We study large deviations of the density profile in these systems, using numerical and analytical methods. We find that the large deviation may be non-differentiable, a phenomenon that is unique to non-equilibrium systems, and discuss the types of models which display such singularities. The structure of these singularities is found to generically be a cusp, which can be described by a Landau free energy or, equivalently, by catastrophe theory. Connections with analogous results in systems with finite-dimensional phase spaces are drawn.