Beyond Stereoselectivity,Switchable Catalysis: Some of the Last Frontier Challenges in Ring‐Opening Polymerization of Cyclic Esters

Metal‐based catalysts and initiators have played a pivotal role in the ring‐opening polymerization (ROP) of cyclic esters, thanks to their high activity and remarkable ability to control precisely the architectures of the resulting polyesters in terms of molar mass, dispersity, microstructure, or tacticity. Today, after two decades of extensive research, the field is slowly reaching maturity. However, several challenges remain, while original concepts have emerged around new types or new applications of catalysis. This Review is not intended to comprehensively cover all of these aspects. Rather, it provides a personal overview of the very recent progress achieved in some selected, important aspects of ROP catalysis—stereocontrol and switchable catalysis. Hence, the first part addresses the development of new metal‐based catalysts for the isoselective ROP of racemic lactide towards stereoblock copolymers, and the use of syndioselective ROP metal catalysts to control the monomer sequence in copolymers. A second part covers the development of ROP catalysts—primarily metal‐based catalysts, but also organocatalysts—that can be externally regulated by the use of chemical or photo stimuli to switch them between two states with different catalytic abilities. Current challenges and opportunities are highlighted.     

Hydroboration of Alkenes Catalysed by a Nickel N-Heterocyclic Carbene Complex: Reaction and Mechanistic Aspects

The pentamethylcyclopentadienyl N-heterocyclic carbene nickel complex [Ni(η⁵-C₅Me₅)Cl(IMes)] (IMes=1,3-dimesitylimidazol-2-ylidene) efficiently catalyses the anti-Markovnikov hydroboration of alkenes with catecholborane in the presence of a catalytic amount of potassium tert-butoxide, and joins the very exclusive club of nickel catalysts for this important transformation. Interestingly, the regioselectivity can be reversed in some cases by using pinacolborane instead of catecholborane. Mechanistic investigations involving control experiments, ¹H and ¹¹B NMR spectroscopy, cyclic voltammetry, piezometric measurements and DFT calculations suggest an initial reduction of the Ni^II precursor to a Ni^I active species with the concomitant release of H₂. The crucial role of the alkoxo-catecholato-borohydride species resulting from the reaction of potassium tert-butoxide with catecholborane in the formation of an intermediate nickel-hydride species that would then be reduced to the Ni^I active species, is highlighted.     

Energetic 2,2‐Dimethyltriazanium Salts: A New Family of Nitrogen‐Rich Hydrazine Derivatives

Amination of 1,1‐dimethylhydrazine with NH₂Cl or hydroxylamine‐O‐sulfonic acid yields 2,2‐dimethyltriazanium (DMTZ) chloride ( 3 ) and sulphate ( 4 ), respectively. The DMTZ cation was paired with the nitrogen‐rich anions 5‐aminotetrazolate ( 5 ), 5‐nitrotetrazolate ( 6 ), 5,5′‐azobistetrazolate ( 7 ), and azide ( 8 ), yielding a new family of energetic salts. The synthesis was carried out by metathesis reactions of salts 3 or 4 and a suitable silver or barium salt. To minimize the risks involved when using heavy metal salts, we used electrodialysis for the synthesis of azide 8 , which avoids the use of highly sensitive species. The DMTZ derivatives were characterized by IR and multinuclear NMR spectroscopy, elemental analysis, and X‐ray diffraction. Thermal stabilities were measured using DSC analysis and their sensitivities towards classical stimuli were determined using standard tests. Lastly, the relationship between hydrogen bonding in the solid state and sensitivity is discussed.     

Barium‐Mediated Cross‐Dehydrocoupling of Hydrosilanes with Amines: A Theoretical and Experimental Approach

Alkaline‐earth (most prominently barium) complexes of the type [Ae{N(SiMe₃)₂}₂?(THF)_x] and [{N^N}Ae{N(SiMe₃)₂}?(THF)_x] are very active and productive precatalysts (TON=396, TOF up to 3600 h^?1; Ca相似文献   

Optical Radiation Associated with Photobiological Hazards for Argon GTAW Arcs

Plasma Chemistry and Plasma Processing - Gas tungsten arc welding (GTAW), a widely used industrial process, is one of the most intense artificial sources of optical radiation. This paper presents a...     

The gastroprotective effect of oxycellulose pellets on gastric ulcers

Oxycellulose belongs to the wide range of pharmaceutically and medically used cellulose derivatives unique in its properties of biodegradability, non-toxicity, antioxidative activity, haemostasis supporting, tissue healing improvement, etc. Glycyrrhizin (Gly) represents the most prominent licorice triterpenoid glycoside, which is responsible for its pharmacological activity, and is closely linked to increasing levels of gastroprotective prostaglandins. In order to study the anti-ulcer activity of oxycellulose sodium and Gly, pellets containing only oxycellulose, or in combination with glycyrrhizin, were prepared using an extrusion/spheronization method. The physical properties and in vitro release rate of the prepared pellets were tested. Based on the obtained results, one sample prepared from oxycellulose only, and one containing glycyrrhizin were chosen for in vivo testing. The healing effect of the prepared pellet formulations was evaluated in the acetic acid induced gastric ulcers in rats. The improvement in gastric ulcer healing was documented for myeloperoxidase activity, alkaline phosphatase activity and gastric wall mucin levels using the Alcian blue binding capacity. The tested pellets significantly reduced myeloperoxidase and alkaline phosphatase activity, and increased gastric wall mucus levels compared to the non-treated group. The in vivo tests showed that oral administration of the prepared pellets accelerated the healing of gastric ulcers in rats.     

Effect of Metal Vapours on the Radiation Properties of Thermal Plasmas

In metallurgic applications of thermal plasmas the presence of metal vapour, even in small proportion tends to increase the electron number density and to modify some basic properties such as the electrical conductivity and the radiation emission. In this paper we focus on the influence of these vapours on the radiation properties. After the definition of some necessary and basic functions and laws we briefly present the mechanisms responsible for emission and absorption of radiation in thermal plasmas. Then an important section is devoted to the role of metal vapours on the net emission coefficient which is the most popular parameter used to evaluate the radiation power losses in general models. It is shown that metal vapours increase the emission especially at low and intermediate temperatures (T < 12,000 K) and that their relative influence depends on the nature of the initial gas and of the metal itself. We list a rather important number of references presenting calculation of net emission in various gas–metal mixtures. Finally we show in a last section the influence of metal radiation on general plasma properties such as the energy transfer (other methods than the net emission coefficient), the cooling effect, the global energy balance and the heating of particulates injected in the plasma. The most spectacular effects are the increase of radiation losses in the energy balance and the complex role of the metal in the local cooling of the plasma.     

KINETICS AND MECHANISM OF THE REACTION BETWEEN OLIGOSILOXANES AND P-TRICHLORO-N-DICHLOROPHOSPHORYL MONOPHOSPHAZENE (Cl3P[dbnd]N-POCl2)

Abstract

³¹P NMR investigation has been made of the action of Cl₃P[dbnd]N-POCl₂(I) first on hexamethyldisiloxane (Me₃Si)₂O and then on oligosiloxanes Me₃Si-(OSiMe₂)_n-OSiMe₃ n = 2 and n=3. The reactions were carried out in bulk or in solution with molar ratios siloxane/(I) varying from I to 5. It was demonstrated that only the monosubstitution of a chlorine atom by the -(OSiMe₂)_n,-OSiMe₃ species n = 0, 2, 3 with elimination of trimethylchlorosilane occurred leading to the derivatives Cl₂OP-N[dbnd]PCl₂O(SiMe₂-O)_nSiMe₃ (II). For n=2, 3 the siloxane redistribution reactions were observed by ²⁹Si NMR analysis. A two steps mechanism is proposed. consisting in a nucleophilic substitution, involving a tricoordinate phosphazenium intermediate, followed by the formation of an active ionic centre probably an oxonium ion, arising from the solvatation by the siloxane of this phosphazeniurn ion and /or of (II) leading to the redistribution reactions. The influences of the solvent, of trimethylchlorosilane, of the temperature, and of the addition of a protonated species (MDH) were investigated.     

Bonding in Barium Boryloxides,Siloxides, Phenoxides and Silazides: A Comparison with the Lighter Alkaline Earths

Barium complexes ligated by bulky boryloxides [OBR₂]⁻ (where R=CH(SiMe₃)₂, 2,4,6-ⁱPr₃-C₆H₂ or 2,4,6-(CF₃)₃-C₆H₂), siloxide [OSi(SiMe₃)₃]⁻, and/or phenoxide [O-2,6-Ph₂-C₆H₃]⁻, have been prepared. A diversity of coordination patterns is observed in the solid state for both homoleptic and heteroleptic complexes, with coordination numbers ranging between 2 and 4. The identity of the bridging ligand in heteroleptic dimers [Ba(μ₂-X₁)(X₂)]₂ depends largely on the given pair of ligands X₁ and X₂. Experimentally, the propensity to fill the bridging position increases according to [OB{CH(SiMe₃)₂}₂)]⁻<[N(SiMe₃)₂]⁻<[OSi(SiMe₃)₃]⁻<[O(2,6-Ph₂-C₆H₃)]⁻<[OB(2,4,6-ⁱPr₃-C₆H₂)₂]⁻. This trend is the overall expression of 3 properties: steric constraints, electronic density and σ- and π-donating capability of the negatively charged atom, and ability to generate Ba ⋅ ⋅ ⋅ F, Ba ⋅ ⋅ ⋅ C(π) or Ba ⋅ ⋅ ⋅ H−C secondary interactions. The comparison of the structural motifs in the complexes [Ae{μ₂-N(SiMe₃)₂}(OB{CH(SiMe₃)₂}₂)]₂ (Ae = Mg, Ca, Sr and Ba) suggest that these observations may be extended to all alkaline earths. DFT calculations highlight the largely prevailing ionic character of ligand-Ae bonding in all compounds. The ionic character of the Ae-ligand bond encourages bridging coordination, whereas the number of bridging ligands is controlled by steric factors. DFT computations also indicate that in [Ba(μ₂-X₁)(X₂)]₂ heteroleptic dimers, ligand predilection for bridging vs. terminal positions is dictated by the ability to establish secondary interactions between the metals and the ligands.