Self-supported metal sulphide nanocrystals-assembled nanosheets on carbon paper as efficient counter electrodes for quantum-dot-sensitized solar cells

Developing efficient counter electrodes (CEs) and quantum dots made of earth-abundant and non-toxic elements is essential but still challenging for quantum dot-sensitized solar cells (QDSSCs). Here, we report a facile strategy to prepare self-supported and robust CoS₂ and NiS nanocrystals-assembled nanosheets directly grown on carbon paper (MSx NS@CP) as efficient counter electrodes for QDSSCs. Such CEs integrate the merits of fast electron transfer from interconnected conductive scaffold, efficient mass transfer from hierarchically vertical nanosheet on 3D open substrate, as well as abundant highly active catalytic sites from metal sulphide nanocrystal units. As a result, QDDSCs based on such CoS₂ NS@CP and NiS NS@CP CEs achieve a PCE of 8.88% and 7.53%, respectively. The detailed analyses suggest that CoS₂ NS@CP has the highest catalytic activity and shows the lowest charger transfer resistance, leading to the highest PCE. These findings may inspire the design and exploration of other self-supported efficient CEs by integrating highly active catalysts onto 3D conductive networks for efficient QDSSCs.     

Euler’s partition theorem for all moduli and new companions to Rogers–Ramanujan–Andrews–Gordon identities

The Ramanujan Journal - We generalise Euler’s partition theorem involving odd parts and distinct parts for all moduli and provide new companions to...     

Amorphous Manganese–Cobalt Nanosheets as Efficient Catalysts for Hydrogen Evolution Reaction (HER)

Catalysis Surveys from Asia - A facile and efficient electrocatalyst for hydrogen evolution reaction (HER) to produce hydrogen is very important for future energy. In this paper, amorphous...     

MoS2/SnS异质结太阳能电池的模拟研究

硫化亚锡(SnS)是一种Ⅳ-Ⅵ族层状化合物半导体材料,其禁带宽度与太阳能电池最佳带隙1.5 eV非常接近,并且在可见光范围内光的吸收系数很大(α>10⁴ cm^-1),因此SnS是一种很有应用前景的材料。本文利用太阳能电池模拟软件wxAMPS模拟了MoS₂/SnS异质结太阳能电池,主要研究SnS吸收层的厚度、掺杂浓度和缺陷态等因素对太阳能电池性能的影响。研究发现:SnS吸收层最佳厚度为2 μm,最佳掺杂浓度为1.0×10¹⁵ cm^-3;同时高斯缺陷态浓度超过1.0×10¹⁵ cm^-3时,电池各项性能参数随着浓度的增加而减小,而带尾缺陷态超过1.0×10¹⁹ cm^-3·eV^-1时,电池性能才开始下降;其中界面缺陷态对太阳能电池影响比较严重,界面缺陷态浓度超过1.0×10¹² cm^-2时,开路电压、短路电流、填充因子和转换效率迅速下降。另外,通过模拟获得的转换效率高达24.87%,开路电压为0.88 V,短路电流为33.4 mA/cm²。由此可知,MoS₂/SnS异质结太阳能电池是一种很有发展潜力的光伏器件结构。     

Optically Active Helical Vinylterphenyl Polymers: Chiral Teleinduction in Radical Polymerization and Tunable Stereomutation

Helical vinyl aromatic polymers are emerging as interesting chiral materials due to their dynamic tailorability, synthetic simplicity, and outstanding chemical and physical stabilities. This Personal Account discusses long‐range chirality transfer in the radical polymerization of vinylterphenyl monomers and tunable stereomutation of the resultant polymers. It begins with a general introduction to the design, synthesis, and characterization of helical poly{(+)‐2,5‐bis[4′‐((S)‐2‐methylbutyloxy)phenyl]styrene}, the first one of this series of polymers. Then, long‐range chirality transfer during radical polymerization of terphenyl‐based vinyl monomers is explained. After that, the chiroptical property control of the resultant polymers by means of the transition from kinetically controlled conformation to thermodynamically controlled conformation and external stimulus is described. This Personal Account concludes by discussing the advantages and disadvantages of the strategy of using vinylterphenyls to obtain optically active helical polymers and providing a short outlook, especially emphasizing the importance of tacticity on the chiroptical properties of polymers.     

ZIF-8衍生的具有可控氧空位的ZnO对光催化去除NO的增强及毒性NO2形成的抑制

氧化锌作为一种半导体材料,具有合适的能带结构位置,高催化效率,低成本和环境可持续性,因而广泛用于光催化领域.然而,由于氧化锌的宽带隙,可见光吸收能力差以及光生电子-空穴对的快速复合,极大地影响了其光催化效率.通过引入氧空位调控光催化剂的结构被证明是一种可以改善光生载流子的分离,从而提高光催化性能的有效方法.本文以ZIF-8为前驱体,采用两步煅烧法合成了具有不同浓度氧空位分布的ZnO纳米光催化剂,通过X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、X射线光电子能谱(XPS)、电子顺磁共振(EPR)、荧光光谱仪(PL)等手段系统地分析了合成的光催化剂的理化性质,并评价了它们在可见光下光催化氧化去除NO反应性能.EPR结果表明,样品中氧空位的浓度取决于温度处理的过程.通过两步煅烧法得到氧化锌中氧空位的含量高于一步直接煅烧法所得的样品.此外,随着煅烧温度升高,合成的氧化锌晶格越完好,其氧空位含量越少.UV-Vis DRS结果表明,两步煅烧法合成的ZnO与商业的ZnO及一步法直接煅烧合成的ZnO相比,其吸光范围从紫外光拓展到了可见光,表现出了更加优异的吸光性能.光催化反应结果表明,与商业氧化锌和一步直接煅烧法所得样品相比,两步煅烧法合成的样品表现出了更优异的光催化去除NO性能,并抑制了中间产物毒性NO2的产生,促进了NO的深度氧化.具体反应路径为:在光照过程中,光生电子很容易被氧空位俘获,与O2反应产生更多的超氧自由基(·O2^-),从而将NO氧化成最终的产物硝酸盐.尤其有趣的是,先在350 ℃煅烧2小时再400℃煅烧1小时的两步法样品Z 350-400的NO去除效率分别比一步法样品Z 400(400℃煅烧)和商用ZnO高出1.5和4.6倍.这表明以MOF材料衍生的具有适当量氧空位的金属氧化物为一种高效去除NO的光催化剂具有很好的应用前景.     

Structure and further fragmentation of significant [a3 + Na − H]+ ions from sodium‐cationized peptides

A good understanding of gas‐phase fragmentation chemistry of peptides is important for accurate protein identification. Additional product ions obtained by sodiated peptides can provide useful sequence information supplementary to protonated peptides and improve protein identification. In this work, we first demonstrate that the sodiated a₃ ions are abundant in the tandem mass spectra of sodium‐cationized peptides although observations of a₃ ions have rarely been reported in protonated peptides. Quantum chemical calculations combined with tandem mass spectrometry are used to investigate this phenomenon by using a model tetrapeptide GGAG. Our results reveal that the most stable [a₃ + Na ? H]⁺ ion is present as a bidentate linear structure in which the sodium cation coordinates to the two backbone carbonyl oxygen atoms. Due to structural inflexibility, further fragmentation of the [a₃ + Na ? H]⁺ ion needs to overcome several relatively high energetic barriers to form [b₂ + Na ? H]⁺ ion with a diketopiperazine structure. As a result, low abundance of [b₂ + Na ? H]⁺ ion is detected at relatively high collision energy. In addition, our computational data also indicate that the common oxazolone pathway to generate [b₂ + Na ? H]⁺ from the [a₃ + Na ? H]⁺ ion is unlikely. The present work provides a mechanistic insight into how a sodium ion affects the fragmentation behaviors of peptides. Copyright © 2015 John Wiley & Sons, Ltd.     

CAD软件在工程地质三维建模中的应用

如何快速、准确地建立地质体的三维模型一直是众多岩土工程数值模拟工作者所面临的难题。虽然三维地学模拟软件具有很好的三维地质建模能力,但是由于数据结构的差异,采用他们现行三维地学模拟软件建立的地质模型难以导入数值模拟分析软件中,以为相应工程问题的数值模拟服务。目前,随着各种CAD、CAM软件行业的的飞速发展,涌现出了许多优秀的三维建模软件,而且这些软件大都与现行数值分析软件有着良好的数据接口功能。据此,本文提出了采用现行CAD软件来建立工程地质体的三维模型,使得建立的模型达到既"可视"又"可算"的目的。将其应用于云南某高速公路边坡的三维建模中,证明了该法具有方便、快捷和合理等优点。     

A connection between linear normal modes and lines of curvature on the potential surface

For the N-degree-of-freedom of linear conservative vibratory systems, the corresponding potential functions can be viewed as N-hypersurfaces in (N + 1)-dimensional space. In this paper, a connection between the geometrical properties (principal curvatures, curvature lines) of potential surfaces and the vibratory characteristics (natural frequencies, linear modes) of the system is built. It is proved that the linear normal modes are exactly the projections of the lines of curvature on the potential surface onto the configuration space with metric m_ij (the mass-matrix); and that the squared natural frequencies are exactly the principal curvatures, at the origin of the configuration space, of the potential surface.