污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能研究

亚甲基蓝和环丙沙星是水体中2种污染物, 对生态环境有潜在危害. 本文以市政剩余活性污泥为原料, 氯化锌为活化剂热解制备污泥基吸附剂, 研究盐酸酸洗浓度、氯化锌浓度、热解温度、热解时间等对污泥基吸附剂吸附水中亚甲基蓝和环丙沙星性能的影响. 结果表明 (1)污泥基吸附剂对亚甲基蓝的吸附性能随盐酸酸洗浓度的增大而增加, 对环丙沙星的吸附性能则随盐酸酸洗浓度的增大呈先降后增趋势, 两者均在1.500mol·L-1盐酸浓度下取得最优值. (2)污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能随氯化锌浓度和热解温度的增加呈先升后降趋势, 在氯化锌浓度为4.0mol·L-1、热解温度为500℃时有最优值; 随着热解时间的延长, 污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能分别在500℃热解70min和80min时有最优值. (3)污泥基吸附剂的最佳制备条件为 氯化锌4.0mol·L-1活化2h、500℃热解70min和80min、1.500mol·L-1盐酸酸洗; 以此制得的污泥基吸附剂对亚甲基蓝和环丙沙星的去除率分别为97.7%和96.4%, 平衡吸附量分别为97.9mg·g-1和3.9mg·g-1, 且污泥基吸附剂对亚甲基蓝和环丙沙星的吸附过程均符合准二级动力学方程.     

Photoinduced dynamics of a cyanine dye: parallel pathways of non-radiative deactivation involving multiple excited-state twisted transients

Cyanine dyes are broadly used for fluorescence imaging and other photonic applications. 3,3′-Diethylthiacyanine (THIA) is a cyanine dye composed of two identical aromatic heterocyclic moieties linked with a single methine, –CH. The torsional degrees of freedom around the methine bonds provide routes for non-radiative decay, responsible for the inherently low fluorescence quantum yields. Using transient absorption spectroscopy, we determined that upon photoexcitation, the excited state relaxes along two parallel pathways producing three excited-state transients that undergo internal conversion to the ground state. The media viscosity impedes the molecular modes of ring rotation and preferentially affects one of the pathways of non-radiative decay, exerting a dominant effect on the emission properties of THIA. Concurrently, the polarity affects the energy of the transients involved in the decay pathways and further modulates the kinetics of non-radiative deactivation.     

Chemical equilibrium controlled synthesis of polyoxymethylene dimethyl ethers over sulfated titania

The chemical equilibrium and reaction kinetic behavior in the synthesis of polyoxymethylene dimethyl ethers(DMMn) were investigated over sulfated titania in order to reveal the decisive factor controlling the reaction. The results showed that the molar ratio of adjacent DMMn products in equilibrium solution had the same value, which depended absolutely on the reaction temperature. Meanwhile, the reactions had the same DMMn products distributions under varied reaction conditions. The equilibrium constants of the related step-wise reactions for DMMn formation were equal, which were calculated based on the bulk compositions of the reaction solution. And thus, the selectivity to DMMn was mainly controlled by the chemical equilibrium, i.e., thermodynamic control. In brief, the present results provide some guidance for future synthesis of DMMn.     

Detoxification of Chemical Warfare Agents Using a Zr6‐Based Metal–Organic Framework/Polymer Mixture

Owing to their high surface area, periodic distribution of metal sites, and water stability, zirconium‐based metal–organic frameworks (Zr₆‐MOFs) have shown promising activity for the hydrolysis of nerve agents GD and VX, as well as the simulant, dimethyl 4‐nitrophenylphosphate (DMNP), in buffered solutions. A hurdle to using MOFs for this application is the current need for a buffer solution. Here the destruction of the simulant DMNP, as well as the chemical warfare agents (GD and VX) through hydrolysis using a MOF catalyst mixed with a non‐volatile, water‐insoluble, heterogeneous buffer is reported. The hydrolysis of the simulant and nerve agents in the presence of the heterogeneous buffer was fast and effective.     

Characteristics of polypropylene biocomposites: effect of chemical treatment to produce cellulose microparticle

Cellulose - In this study, cellulose microparticle were prepared by sulfuric acid hydrolysis, glyoxal crosslinking and acetylation followed by air classifying mill, and their properties including...     

Efficient deep blue organic light emitting diodes based on [2,7,7,13,13-pentamethyl-9-(10-phenylanthracen-9-yl)-7,13-dihydrobenzo[5,6]-s-indaceno[1,2-g]quinoline] derivatives

Abstract

In this study, as the ongoing effort to develop efficient blue OLEDs, two deep blue emitters based on indenoquinoline-substituted anthracene derivatives have been synthesized and characterized. Multilayer organic light emitting diodes were fabricated with the following sequence: indium-tin-oxide (ITO)/4,4’,4’’-tris[2-naphthyl(phenyl)amino (2-TNATA)/4,4’-bis(N-(1-naphthyl)-N-phenylamino) biphenyl (NPB)/Blue emitting materials/Bathophenanthroline (Bphen)/lithium quinolate (Liq)/Al. All the devices showed efficient blue emissions. Particularly, a device using ‘2,7,7,13,13-pentamethyl-9-(10-phenylanthracen-9-yl)?7,13-dihydrobenzo[5,6]-s-indaceno[1,2-g] quinoline’ as an emitter showed a maximum external quantum efficiency (EQE) of 4.92% with the Commission Internationale De L’Énclairage (CIE) coordinates of (0.15, 0.10) at 8.0?V.     

Xe对NO(X)微分截面和非弹性散射中的碰撞诱导旋转准直

本文对NO(X)-Xe碰撞系统在碰撞能量为519 cm^-1，测量了完全?-双峰分解的微分截面和碰撞引起的旋转准直力矩. 同时结合初始量子态选择，使用六极杆的非均质电场，借助量子态分辨的测量，利用(1+1'')共振增强的多光子电离和速度离子成像. 结果显示，微分截面以及偏振相关的微分截面均显示与从头算势能面上进行的量子力学散射计算[J. K?os etal. J. Chem. Phys. 137, 014312 (2012)]一致. 通过与准经典轨迹、硬壳势能的量子力学散射以及运动近端模型的比较，评估了势能对所测微分截面和碰撞引起的旋转准直力矩的影响.     

The Synergistic Effect of a Bimetallic Catalyst for the Synthesis of Carbon Nanotube Aerogels and their Predominant Chirality

Synthesis of continuous spinnable carbon nanotube (CNT) fibers is the most promising method for producing CNT fibers for commercial applications. The floating-catalyst chemical vapor deposition (FC-CVD) method is a rapid process that achieves catalyst formation, CNT nucleation and growth, and aerogel-like sock formation within a few seconds. However, the formation mechanism is unknown. Herein, the progress of CNT fiber formation with bimetallic catalysts was studied, and the effect of catalyst composition to CNT fiber synthesis and their structural properties was investigated. In the case of bimetallic catalysts, the carbon source rapidly decomposes and generates various secondary hydrocarbon species, such as CH₄, C₂H₄, C₂H₂, C₃H₆, and C₄H₁₀ whereas monometallic catalysts generate only CH₄ and C₂H₄ on decomposition. CNT fiber formation with Fe₁Ni₀ begins about 400 mm from the reactor entrance, whereas CNT formation with Fe_0.8Ni_0.2 and Fe_0.5Ni_0.5 begins at about 500 and 300 mm, respectively. The formed CNT bundles and individual CNTs are oriented along the gas flow at these locations. The enhanced rate of fiber formation and lowering of growth temperature associated with bimetallic catalysts is explained by the synergistic effects between the two metals. The synthesized CNTs become predominantly semiconducting with increasing Ni contents.