Rhodium-Catalyzed Enantioselective Synthesis,Structures, and Properties of Single and Double Azahelicene-Like Molecules

The enantioselective synthesis of aza[6] and [7]helicene-like molecules have been achieved by the cationic rhodium(I)/axially chiral biaryl bisphosphine complex-catalyzed intramolecular [2+2+2] cycloaddition of cyanodiynes. This protocol was successfully applied to the diastereo- and enantioselective synthesis of an S-shaped double aza[6]helicene-like molecule with a high ee value of 89 %. Although no epimerization and racemization were observed in the double carbo[6]helicene-like molecule at 80 °C, epimerization and racemization of the double aza[6]helicene-like molecule proceeded at 80 °C. This double aza[6]helicene-like molecule showed good fluorescent quantum yields and chiroptical responses under both neutral and acidic conditions.     

Rhodium-Catalyzed Highly Diastereo- and Enantioselective Synthesis of a Configurationally Stable S-Shaped Double Helicene-Like Molecule

An S-shaped double helicene-like molecule (>99 % ee), possessing stable helical chirality, has been synthesized by the rhodium(I)/difluorphos complex-catalyzed highly diastereo- and enantioselective intramolecular double [2+2+2] cycloaddition of a 2-naphthol- and benzene-linked hexayne. The collision between two terminal naphthalene rings destabilizes the helical chirality of the S-shaped double helicene-like molecule, but the introduction of two additional fused benzene rings significantly increases the configurational stability. Thus, no epimerization and racemization were observed even at 100 °C. The enantiopure S-shaped double helicene-like molecule forms a trimer through the multiple C−H⋅⋅⋅π and C−H⋅⋅⋅O interactions in the solid-state. The trimers stack to form columnar packing structures, in which neighboring stacks have opposite dipole directions. The accumulation of helical structures in the same direction in the S-shaped double helicene-like molecule enhanced the chiroptical properties.     

Preparation of monodispersed vinylpyridine–divinylbenzene porous copolymer resins and their application to high-performance liquid chromatographic separation of aromatic amines

For the separation of aromatic amines, two types of monodispersed porous polymer resins were prepared by the copolymerization of 2-vinylpyridine and 4-vinylpyridine with divinylbenzene in the presence of template silica gel particles (particle size 5 μm), followed by dissolution of the template silica gel in an alkaline solution. The transmission electron micrographs and the scanning electron micrograph revealed that these templated polymer resins have a spherical morphology with a good monodispersity and porous structure. Using these monodispersed polymer resins, the high-performance liquid chromatographic separation of aromatic amines in the mobile phases of pHs 2.0, 2.9, 4.1, 7.2 and 11.7 were carried out. The 2-vinylpyridine–divinylbenzene copolymer resins showed slightly stronger retentions for aromatic amines than the 4-vinylpyridine–divinylbenzene copolymer resins. Under acidic conditions (around pH 2.0), aniline and the toluidines showed no retention on these copolymer resins due to the repulsion between the cationic forms of these amines and pyridinium cations in the stationary phase, whereas less basic aromatic amines or non-basic acetanilide showed slight retentions. Above pH 4.1, the separation of aromatic amines with these polymer resins showed a typical reversed-phase mode separation. Therefore, the separation patterns of aromatic amines are effectively tunable by changing the pH value of the mobile phases. A good separation of eight aromatic amines was achieved at pH 2.9 using the 2-vinylpyridine–divinylbenzene copolymer resins.     

Oxidation of iron studied by PAC and CEMS

A metallic Fe specimen, implanted with ¹¹¹In, was oxidized and subsequently annealed in a high vacuum for PAC spectroscopy. This treatment gave rise to a huge PAC signal. The magnitude of the hyperfine field was found to be one third of that in metallic Fe. CEMS on an enriched Fe foil given exactly the same treatment has revealed that a maghemite phase (γ-Fe₂O₃) is formed right after the oxidation treatment and a magnetite phase (Fe₃O₄) after the vacuum annealing. ¹¹¹In in the magnetite phase was found to give rise to a PAC signal with large amplitude. PAC spectroscopy in an external magnetic field has revealed that the site of ¹¹¹In is the tetrahedral site of the magnetite with the hyperfine field of +12 T, which is in excellent agreement with those in the ferrites. The present method of oxidation of metallic Fe with nuclear probes in it is quite useful for the study of oxidation processes. Also, it provides us with a simple means to prepare ferrite specimens incorporated with nuclear probes. This revised version was published online in August 2006 with corrections to the Cover Date.     

Conformation dependence of DNA electrophoretic mobility in a converging channel

The electrophoresis of λ‐DNA is observed in a microscale converging channel where the center‐of‐masses trajectories of DNA molecules are tracked to measure instantaneous electrophoretic (EP) mobilities of DNA molecules of various stretch lengths and conformations. Contrary to the usual assumption that DNA mobility is a constant, independent of field and DNA length in free solution, we find DNA EP mobility varies along the axis in the contracting geometry. We correlate this mobility variation with the local stretch and conformational changes of the DNA, which are induced by the electric field gradient produced by the contraction. A “shish‐kebab” model of a rigid polymer segment is developed, which consists of aligned spheres acting as charge and drag centers. The EP mobility of the shish‐kebab is obtained by determining the electrohydrodynamic interactions of aligned spheres driven by the electric field. Multiple shish‐kebabs are then connected end‐to‐end to form a freely jointed chain model for a flexible DNA chain. DNA EP mobility is finally obtained as an ensemble average over the shish‐kebab orientations that are biased to match the overall stretch of the DNA chain. Using physically reasonable parameters, the model agrees well with experimental results for the dependence of EP mobility on stretch and conformation. We find that the magnitude of the EP mobility increases with DNA stretch, and that this increase is more pronounced for folded conformations.     

Structural characterization of hierarchically porous alumina aerogel and xerogel monoliths

Detailed nanostructures have been investigated for hierarchically porous alumina aerogels and xerogels prepared from ionic precursors via sol–gel reaction. Starting from AlCl₃·6H₂O and poly(ethylene oxide) (PEO) dissolved in a H₂O/EtOH mixed solvent, monolithic wet gels were synthesized using propylene oxide (PO) as a gelation initiator. Hierarchically porous alumina xerogels and aerogels were obtained after evaporative drying and supercritical drying, respectively. Macroporous structures are formed as a result of phase separation, while interstices between the secondary particles in the micrometer-sized gel skeletons work as mesoporous structures. Alumina xerogels exhibit considerable shrinkage during the evaporative drying process, resulting in relatively small mesopores (from 5.4 to 6.2 nm) regardless of the starting composition. For shrinkage-free alumina aerogels, on the other hand, the median mesopore size changes from 13.9 to 33.1 nm depending on the starting composition; the increases in PEO content and H₂O/EtOH volume ratio both contribute to producing smaller mesopores. Small-angle X-ray scattering (SAXS) analysis reveals that variation of median mesopore size can be ascribed to the change in agglomeration state of primary particles. As PEO content and H₂O/EtOH ratio increase, secondary particles become small, which results in relatively small mesopores. The results indicate that the agglomeration state of alumina primary particles is influenced by the presence of weakly interacting phase separation inducers such as PEO.     

Quantitative analysis of triphenylboron in environmental water samples by liquid chromatography/mass spectrometry.

Liquid chromatography/mass spectrometry (LC/MS) has been applied to the analysis of triphenylboron, which has been produced as a substitute for organotin compounds, in water. Although commercial triphenylboron compounds are produced as pyridinyl complexes, the chemical form in water is supposed to be mainly triphenylboron after liberating pyridine. The triphenylborons were extracted from water with an Empore C18 extraction disk under acidic condition, and the extracts were introduced directly into a liquid chromatograph-mass spectrometer equipped with a negative ion electrospray ionization interface. Identification of the compounds was performed with specific ions produced from the triphenylboron, and a quantitative analysis was carried out using the peak areas. The average recoveries from distilled water, seawater and river water at 0.30 ng/ml were 92.3, 100 and 85.3%, respectively. A detection limit of 0.023 ng/ml for triphenylboron was achieved.     

Determination of ppt levels of atmospheric volatile organic compounds in Yakushima, a remote south-west island of Japan

An analytical method was utilized to detect ppt levels of VOCs in air. The method was based on the US-EPA method TO-14, consisting of canister sampling, three module enrichment and GC/MS analysis. Target compounds included chlorofluorocarbons (four kinds), benzene and its derivatives (14), halogenated hydrocarbons (20), and others (three). The minimum detection limits of the method for the target compounds ranged from 0.016 to 0.040 ppb (0.06–0.23 μg/m³). The recoveries of the target compounds ranged from 77 to 113% and relative coefficients of variation (n=4) were 3.0–9.0%. The sampled air was stable for at least 14 days after pressurizing with humidified nitrogen gas at 200 kPa (absolute pressure). The method was applied to analyze the VOCs in the air of Yakushima, a remote island of south-west Japan where no distinct local pollution source is considered.     

A Review of Online Real-Time Process Analyses of Melt-State Polymer Using the Near-Infrared Spectroscopy and Chemometrics

Abstract

This review describes the online process monitoring of the melt-state polymer by near-infrared (NIR) spectroscopy and chemometrics. The spectra of linear low-density polyethylene (LLDPE), random polypropylene (RPP), block polypropylene (BPP), and ethylene-vinylacetate (EVA) copolymer in melt states measured by an online monitoring system with a Fourier transform near-infrared spectrometer are discussed. The calibration models for the density of LLDPE, the content of ethylene copolymers in RPP and BPP, and vinylacetate concentration (VA) in EVA copolymers using partial least squares regression are reported. The continuous monitoring of the LLDPE density at the real plant is described as an example of online monitoring using NIR spectroscopy and chemometrics. For the precise prediction of VA in EVA, a combination method using regression and discrimination was inducted. Three compensation methods for the effect of the temperature change in the RPP and BPP samples are shown. Conventional calibration transfer methods are introduced, and a practical calibration transfer method using two samples and its performance are reported using BPP and RPP spectra. Moreover, the possibility of a calibration correction method using one sample for the realization of long-term traceability is indicated by the example of the relocation.