Evaluating the mobility of toxic metals in untreated industrial wastewater sludge using a BCR sequential extraction procedure and a leaching test

The distribution and speciation of toxic metals in industrial wastewater sludge (IWS) was investigated. In this work, the modified BCR three-stage sequential extraction procedure was applied to the fractionation of Cr Pb Ni, and Cd in untreated industrial wastewater sludge from industrial sites in Hyderabad (Pakistan). The extracts were analyzed using electrothermal atomic absorption spectrometry. The procedure was evaluated using a certified reference material for soil mixed with sewage sludge BCR 483. The results from the partitioning study indicate that more easily mobilized forms (acid exchangeable) of Cd were dominant. The oxidizable fraction was dominant for all four toxic metals. Metal recovery was good, with <4% difference between the total metal recovered through the extractant steps and the total metal determined after microwave digestion. Lixiviation tests (DIN 38414-S4) were used to evaluate the leaching of toxic species from IWS, and it was observed that levels of leachable toxic metals were low compared to the amount of metal extracted in the exchangeable fraction of the BCR protocol.     

Analytical and semi-preparative high-performance liquid chromatographic separation and assay of hydroxychloroquine enantiomers.

(+/-)-Hydroxychloroquine (HCQ) is an antimalarial and anti-arthritic drug which is administered as the racemate. An accurate, precise and sensitive high-performance liquid chromatographic assay was developed for the determination of HCQ enantiomers in samples from human plasma, serum, whole blood, and urine. After addition of (+/-)-chloroquine (internal standard), samples of blood component (0.5 ml) or urine (0.1 ml) were alkalinized and extracted with 5 ml of diethyl ether. After solvent evaporation the residues were derivatized with (+)-di-O-acetyl-L-tartaric anhydride at 45 degrees C for 30 min. The resulting diastereomers were then resolved using a C8 analytical column with a mobile phase consisting of 0.05 M KH2PO4 (pH 3)-methanol-ethanol-triethylamine (78:22:1:0.08). The ultraviolet detection wavelength was set at 343 nm. The derivatized HCQ enantiomers eluted in less than 40 min, free of interfering peaks. Excellent linear relationships (r2 > 0.997) were obtained between the area ratios and the corresponding plasma concentrations over a range of 12.5-500 ng/ml. The diastereomers could be hydrolysed using microwave energy and neutral pH, which enabled us to resolve the enantiomers on a semi-preparative (C18 column) scale. The method was suitable for the analysis and semi-preparative separation of HCQ enantiomers.     

Cyclometalated organoplatinum(II) complexes: first example of a monodentate benzo[h]quinolyl ligand and a complex with bridging bis(diphenylphosphino)ethane

The cyclometalated complexes [Pt(ppy)R(SMe(2))] or [Pt(bhq)R(SMe(2))], where ppyH = 2-phenylpyridine, bhqH = benzo[h]quinoline and R = methyl or p-tolyl, react with bis(diphenylphosphino)ethane, dppe, in a 1:1 ratio to give the corresponding complexes [Pt(κ(1)-C-ppy)R(dppe)] or [Pt(κ(1)-C-bhq)R(dppe)], in which the ppy or bhq ligands are monodentate and dppe is chelating. The similar reaction in a 2:1 ratio gives the binuclear complexes [{Pt(ppy)R}(2)(μ-dppe)] or [{Pt(bhq)R}(2)(μ-dppe)], in which the dppe ligands are in the unusual bridging bidentate bonding mode.     

Fiber optic-linear array detection spectrophotometry in combination with dispersive liquid-liquid microextraction for preconcentration and determination of copper

In this research, simple, rapid and efficient method, dispersive liquid-liquid microextraction (DLLME) combined fiber optic -linear array detection spectrophotometry (FO-LADS) was developed using a cylindrical micro-cell for preconcentration and determination of Cu(II) in samples. DLLME and FO-LADS methods have good matching conditions for being combined since FO-LADS is a suitable method for the determination of analytes in low volume of the remained phase obtained after DLLME. Molar absorptivity of complex Cu with (4-benzylp iperidineditiocarbamate potassium salt) (BPDC) was determined as 2.75 × 10⁴ L mol^-1 cm^-1 at 7nmax = 436 nm. Under the optimum conditions the calibration graph was linear in the rage of 2–70 fug L^-1 with detection limit of 0.34 fug L^-1. The proposed procedure was successfully applied to the determination of Cu(II) in real water samples and human urine sample.     

A facile method for the synthesis of large‐size Ag nanoparticles as efficient SERS substrates

Silver nanoparticles (Ag NPs) enjoy a reputation as an ultrasensitive substrate for surface‐enhanced Raman spectroscopy (SERS). However, large‐scale synthesis of Ag NPs in a controlled manner is a challenging task for a long period of time. Here, we reported a simple seed‐mediated method to synthesize Ag NPs with controllable sizes from 50 to 300 nm, which were characterized by scanning electron microscopy (SEM) and UV–Vis spectroscopy. SERS spectra of Rhodamine 6G (R6G) from the as‐prepared Ag NPs substrates indicate that the enhancement capability of Ag NPs varies with different excitation wavelengths. The Ag NPs with average sizes of ~150, ~175, and ~225 nm show the highest SERS activities for 532, 633, and 785‐nm excitation, respectively. Significantly, 150‐nm Ag NPs exhibit an enhancement factor exceeding 10⁸ for pyridine (Py) molecules in electrochemical SERS (EC‐SERS) measurements. Furthermore, finite‐difference time‐domain (FDTD) calculation is employed to explain the size‐dependent SERS activity. Finally, the potential of the as‐prepared SERS substrates is demonstrated with the detection of malachite green. Copyright © 2016 John Wiley & Sons, Ltd.     

Electro‐oxidation and reduction of H2 on platinum studied by scanning electrochemical microscopy for the purpose of local detection of H2 evolution

Electrochemical detection of H₂ using scanning electrochemical microscopy (SECM) has shown to hold great promise as a sensitive characterization method with high spatial resolution for active surfaces generating H₂. Herein, the factors contributing to the current that is measured by SECM in generation/collection mode for H₂ detection are studied. In particular, the concentration gradient of H₂ at the substrate, the H₂/H⁺ recycling between the SECM tip and substrate and hemispherical profile of H₂ diffusion has been discussed. It was postulated that H₂/H⁺ recycling plays a dominant role in the oxidative current measured in generation/collection mode of SECM when the microelectrode is positioned in close vicinity of substrate. Copyright © 2015 John Wiley & Sons, Ltd.     

Optical and electrochemical DNA nanobiosensors

In the past two decades, nanoscale advanced materials have been explored for biosensing molecules, so new horizons have opened up for identifying and quantifying biomolecules, and possible early diagnosis of diseases.DNA nanobiosensors show promise. This article provides an overview on their optical and electrochemical aspects. We discuss recent progress in this field, describing basic concepts of molecular beacons and quantum dots as optical nano-imaging systems. Also, carbon nanotubes provide a platform for development and advancement of electrochemical DNA nanobiosensors, which are increasingly being implemented as robust tools for detection in biomedical sciences.     

Local near field assisted ablation of fused silica

In this contribution we present recent experimental and theoretical results on local near-field assisted laser ablation. Along these lines, we have generated sub-diffraction sized nanostructures on fused silica substrates, exploiting the local near fields of highly ordered triangular gold nanoparticle arrays generated by nanosphere lithography. After preparation, the nanoparticle arrays were irradiated with a single 35 fs long laser pulse with a central wavelength of λ=790 nm. The pulse energy was set to E=3.9 μJ, resulting in a fluence well below the ablation threshold of the fused silica substrates. In addition, 3D electromagnetic simulations using a finite integration technique in time domain have been performed. The simulations demonstrate that indeed the local field in the vicinity of the tips of the triangular nanoparticles overcome the ablation threshold and easily explain the generated nanostructures. Most importantly, the simulations show, that higher order modes contribute to the ablation process. These modes cause ablation along the side edges of the nanoparticles. Finally, we demonstrate, that the optical properties of the triangular nanoparticles, which can be tuned by their morphology, are crucial parameters for the generation of the ablation structures.     

Determination of cadmium and lead in biological samples by three ultrasonic-based samples treatment procedures followed by electrothermal atomic absorption spectrometry

The development of 3 different ultrasonic-based sample treatment methods, ultrasonic probe-assisted acid extraction, ultrasonic-assisted acid slurry, and ultrasonic-assisted acid pseudodigestion is presented. These methods were compared for the determination of Cd and Pb by electrothermal atomic absorption spectrometry in biological samples (blood and scalp hair) and validated by using certified materials BCR 397 human hair and BCR 185R bovine liver. The sample amounts chosen to perform the analysis were 100 mg and 0.5 mL for solids (human hair and bovine liver) and blood samples, respectively. An acid digestion induced by microwave energy was used to obtain the total metal concentrations and for comparative purposes. The best results were obtained with the ultrasonic-assisted acid pseudodigestion, with which it was possible to perform accurate and precise determination of the Cd and Pb contents in 2 certified reference materials and biological samples of 50 normal males of ages 25-40 years. The precision of the methods, together with their efficiency, rapidity, low cost, and environmental acceptability, make them good alternatives for the determination of trace metals from biological samples. The precision of the methods for accuracy evaluation, resulting in good agreement according to the t-test for a 95% confidence level, and the relative standard deviations were lower than 10% (n=10) for all determinations.