The pyrolysis of propane

The pyrolysis of propane plays an important role in determining the combustion properties of natural gas mixtures and offers insight into the cracking patterns of larger fuels. This work investigates propane pyrolysis behind reflected shock waves with a multiwavelength laser-absorption speciation technique. Nine laser wavelengths, sensitive to key pyrolysis species, were used to measure absorbance time histories during the decomposition of 2% propane in argon between 1022 and 1467 K, 3.7-4.3 atm. Absorbance models were developed at each diagnostic wavelength to interrogate common initial conditions, and time histories of all major species are reported at 1250, 1290, 1330, 1370, and 1410 K. Nearly complete carbon recovery observed at lower temperatures enabled the inference of hydrogen formation from atomic conservation, while decaying carbon recovery at high temperatures suggests the formation of allene and 1-butene. The results show systematically faster pyrolysis than predicted by kinetic modeling and motivate further study into the kinetics of propane pyrolysis.     

Gold(I)-Catalyzed and PTSA-Promoted Cycloisomerization of Ynamides to Access Pyrrole Substituted α,β-Unsaturated Ketones**

Substituted pyrroles are prevalent aromatic ring systems encountered in numerous natural products and bioactive molecules. Herein, a novel ynamide scaffold has been designed, synthesized and subsequently applied to an unprecedented gold-catalyzed and para-toluenesulfonic acid (PTSA)-assisted cascade cycloisomerization reaction for the synthesis of β-pyrrole substituted α,β-unsaturated ketones. Notably, the reaction is stereoselective, offering E-isomer as major product with low to moderate yield.     

Morphological,mechanical, and in vitro cytocompatibility analysis of poly(vinyl alcohol)–silica glass hybrid scaffolds reinforced with cellulose nanocrystals

Cellulose nanocrystal-reinforced poly(vinyl alcohol)/silica glass hybrid scaffolds were fabricated using the freeze-drying method. In this study, we develop molecular-level-based hybrid scaffolds with possible bioactivity behavior by adding silica sol–gel. The results showed a highly porous structure and a significant improvement in mechanical performance (stiffness) of hybrid scaffolds with an increased content of cellulose nanocrystals followed by the addition of silica-based bioactive glass. In vitro cell study with MC3T3-E1 cells on hybrid scaffolds for 1 and 3 days revealed good cell adhesion and growth. Thus, the obtained hybrid scaffold may be a competitive candidate for bone tissue engineering applications.     

Langmuir–Blodgett films of stearic acid deposited on substrates at different orientations relative to compression direction: alignment layer for nematic liquid crystal

The Langmuir monolayer at an air–water interface shows remarkably different surface pressure (π)–area (A) isotherm, when measured with the surface normal of a Wilhelmy plate parallel or perpendicular to the direction of compression of the monolayer. Such difference arises due to difference in stress exerted by the monolayer on the plate in different direction. In this article, we report the effect of changing the direction of substrate normal with respect to the compression of the monolayer during Langmuir–Blodgett (LB) film deposition on the morphology of the films. The morphology of the LB film of stearic acid is studied using an atomic force microscope. The morphology of the LB films is found to be different due to difference in the stress in different directions. The role of such surface morphology on the alignment of a nematic liquid crystal (LC) in LC cells is studied. The granular texture of LB films of stearic acid supports the homogeneous alignment of the LC whereas the uniform texture supports the homeotropic alignment of the LC.     

Bimetallic Iron–Palladium Catalyst System as a Lewis-Acid for the Synthesis of Novel Pharmacophores Based Indole Scaffold as Anticancer Agents

The Friedel–Crafts reaction between substituted indoles as nucleophiles with chalcones-based benzofuran and benzothiophene scaffolds was carried out by employing a highly efficient bimetallic iron–palladium catalyst system. This catalytic approach produced the desired bis-heteroaryl products with low catalyst loading, a simple procedure, and with acceptable yield. All synthesized indole scaffolds 3a–3s were initially evaluated for their cytotoxic effect against human fibroblast BJ cell lines and appeared to be non-cytotoxic. All non-cytotoxic compounds 3a–3s were then evaluated for their anticancer activities against cervical cancer HeLa, prostate cancer PC3, and breast cancer MCF-7 cell lines, in comparison to standard drug doxorubicin, with IC₅₀ values 1.9 ± 0.4 µM, 0.9 ± 0.14 µM and 0.79 ± 0.05 µM, respectively, and appeared to be moderate to weak anticancer agents. Fluoro-substituted chalcone moiety-containing compounds, 3b appeared to be the most active member of the series against cervical HeLa (IC₅₀ = 8.2 ± 0.2 µM) and breast MCF-7 cancer cell line (IC₅₀ = 12.3 ± 0.04 µM), whereas 6-fluroindol-4-bromophenyl chalcone-containing compound 3e (IC₅₀ = 7.8 ± 0.4 µM) appeared to be more active against PC3 prostate cancer cell line.     

Fast Li-Ion Conduction in Spinel-Structured Solids

Spinel-structured solids were studied to understand if fast Li⁺ ion conduction can be achieved with Li occupying multiple crystallographic sites of the structure to form a “Li-stuffed” spinel, and if the concept is applicable to prepare a high mixed electronic-ionic conductive, electrochemically active solid solution of the Li⁺ stuffed spinel with spinel-structured Li-ion battery electrodes. This could enable a single-phase fully solid electrode eliminating multi-phase interface incompatibility and impedance commonly observed in multi-phase solid electrolyte–cathode composites. Materials of composition Li_1.25M(III)_0.25TiO₄, M(III) = Cr or Al were prepared through solid-state methods. The room-temperature bulk Li⁺-ion conductivity is 1.63 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄. Addition of Li₃BO₃ (LBO) increases ionic and electronic conductivity reaching a bulk Li⁺ ion conductivity averaging 6.8 × 10⁻⁴ S cm⁻¹, a total Li-ion conductivity averaging 4.2 × 10⁻⁴ S cm⁻¹, and electronic conductivity averaging 3.8 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄ with 1 wt. % LBO. An electrochemically active solid solution of Li_1.25Cr_0.25Mn_1.5O₄ and LiNi_0.5Mn_1.5O₄ was prepared. This work proves that Li-stuffed spinels can achieve fast Li-ion conduction and that the concept is potentially useful to enable a single-phase fully solid electrode without interphase impedance.     

Phenylpropanoids from Tanacetum baltistanicum with Nematocidal and Insecticidal Activities

Chemistry of Natural Compounds - One new and seven known secondary metabolites 1–8 were isolated, and the nematocidal and insecticidal activities of major compounds from Tanacetum...     

Thermal Behavior of Bismaleimide-Amine/Vinyl Ester Resin-Styrene Blends

Abstract

Curing of 4,4′-bismaleimido-diphenyl methane-4,4′ -diaminodi-phenyl methane (1:0.3 molar ratios) (BM-A) was carried out in the presence of vinyl ester-styrene resin. The BM-A could be cured at lower temperatures. The char yields of the cured resins depended on the percentage of bismaleimide-amine in the blend.