Finite element modal solutions of planar photonic crystal fibers with rectangular air-holes

Modal solutions of planar photonic crystal waveguides with rectangular air-holes are presented by using a rigorous full-vectorial finite element-based approach. The effective indices, mode field profiles, spot-sizes, power confinements, modal hybridness, beat lengths and group velocity dispersions are shown for the fundamental and higher order modes of the quasi-TE and TM polarizations.     

Study of the peak effect phenomenon in single crystals of 2H-NbSe2

The weakly pinned single crystals of the hexagonal 2H-NbSe₂ compound have emerged as prototypes for determining and characterizing the phase boundaries of the possible order-disorder transformations in the vortex matter. We present here a status report based on the ac and dc magnetization measurements of the peak effect phenomenon in three crystals of 2H-NbSe₂, in which the critical current densities vary over two orders of magnitude. We sketch the generic vortex phase diagram of a weakly pinned superconductor, which also utilizes theoretical proposals. We also establish the connection between the metastability effects and pinning.     

Novel nonperipheral octa-3-hydroxypropylthio substituted metallo-phthalocyanines: synthesis,characterization, and investigation of their electrochemical,photochemical and computational properties

The current study describes the synthesis, electrochemical, computational, and photochemical properties of octa (3-hydroxypropylthio) substituted cobalt (II) ( 4 ), copper (II) ( 5 ), nickel (II) ( 6 ) and zinc(II) ( 7 ) phthalocyanine derivatives. These novel compounds were characterized by elemental analysis,¹H,¹³C NMR, FT-IR, UV-Vis, and MS. The redox behaviors of these metallo-phthalocyanines were investigated by the cyclic voltammetric method. The optimized molecular structure and gauge-including atomic orbital (GIAO)¹H and¹³C NMR chemical shift values of these phthalocyanines in the ground state had been calculated by using B3LYP/6–31G(d,p) basis set. The outcomes of the optimized molecular structure were given and compared with the experimental NMR values. The photochemical properties including photodegradation and singlet oxygen generation of zinc(II) phthalocyanine were studied in DMSO solution for the determination of its photosensitizer behaviors.     

FT-Raman, FT-IR spectra and total energy distribution of 3-pentyl-2,6-diphenylpiperidin-4-one: DFT method

FT-Raman and FT-IR spectra were recorded for 3-pentyl-2,6-diphenylpiperidin-4-one (PDPO) sample in solid state. The equilibrium geometries, harmonic vibrational frequencies, infrared and the Raman scattering intensities were computed using DFT/6-31G(d,p) level. Results obtained at this level of theory were used for a detailed interpretation of the infrared and Raman spectra, based on the total energy distribution (TED) of the normal modes. Molecular parameters such as bond lengths, bond angles and dihedral angles were calculated and compared with X-ray diffraction data. This comparison was good agreement. The intra-molecular charge transfer was calculated by means of natural bond orbital analysis (NBO). Hyperconjugative interaction energy was more during the π–π* transition. Energy gap of the molecule was found using HOMO and LUMO calculation, hence the less band gap, which seems to be more stable. Atomic charges of the carbon, nitrogen and oxygen were calculated using same level of calculation.     

Study of magnetoresistance and conductance of bicrystal grain boundary in La0.67Ba0.33MnO3 thin film

La_0.67Ba_0.33MnO₃ (LBMO) thin film is deposited on a 36.7°C SrTiO₃ bicrystal substrate using laser ablation technique. A microbridge is created across bicrystal grain boundary and its characteristics are compared with a microbridge on the LBMO film having no grain boundary. Presence of grain boundary exhibits substantial magnetoresistance ratio (MRR) in the low field and low temperature region. Bicrystal grain boundary contribution in MRR disappears at temperature T>175 K. At low temperature, I-V characteristic of the microbridge across bicrystal grain boundary is nonlinear. Analysis of temperature dependence of dynamic conductance-voltage characteristics of the bicrystal grain boundary indicates that at low temperatures (T<175 K) carrier transport across the grain boundary in LBMO film is dominated by inelastic tunneling via pairs of manganese atoms and tunneling through disordered oxides. At higher temperatures (T>175 K), magnetic scattering process is dominating. Decrease of bicrystal grain boundary contribution in magnetoresistance with the increase in temperature is due to enhanced spin-flip scattering process.     

Kinetics and mechanism of oxidation of N,α-diphenylnitrones by 4-(dimethylamino)pyridinium chlorochromate (DMAPCC) in aqueous DMF medium

The kinetics of oxidation of aldonitrones by 4-(dimethylamino)pyridinium chlorochromate (DMAPCC) has been studied in aqueous N,N-dimethylformamide in the presence of perchloric acid. The reaction follows first-order kinetics with respect to each of DMAPCC and nitrone. The order with respect to [H⁺] was found to be close to zero. The rate of oxidation was unaltered by the variation of [NaClO₄] but addition of MnSO₄ decreased the rate. The reaction rate was found to decrease with a decrease in dielectric constant of the medium. Electron-releasing and electron-withdrawing groups perturb the reaction rate with a good Hammett correlation. The oxidation products were found to be benzaldehyde and nitrosobenzene. The reaction was carried out at four different temperatures and the activation parameters have been calculated. On the basis of the experimental findings, a suitable mechanism has been proposed.     

Design and optimization of photonic crystal based eight channel dense wavelength division multiplexing demultiplexer using conjugate radiant neural network

In this paper, two dimensional photonic crystal, based eight-channel demultiplexer is proposed and designed for DWDM applications. The performance parameters of the demultiplexer such as transmission efficiency, channel spacing, spectral line width, Q factor, and crosstalk have been evaluated. The proposed demultiplexer comprises of bus waveguide, drop waveguide and parellogram resonant cavity (PRC). The bus waveguide transmits light to the PRC and exits through respective drop waveguide. The PRC consists of a parellogram resonator with a nano ring cavity that is used for dropping eight specific wavelength for ITU-T G 694.1 standard with 50 GHz channel spacing. The circular ring resonator is placed above the PRC wherein a resonant air hole (Cr) is positioned for desired channel selection. The channel selection is done by altering the radius of the air hole. In addition, a conjugate radiant neural network is implemented for optimizing the radii of resonant air holes to select the required channel wavelength. The proposed device is very compact and it could be considered for implementing the photonic integrated circuits.     

Role of magnetic shear on the electrostatic current driven ion-cyclotron instability in the presence of parallel electric field

Recent observation and theoretical investigations have led to the significance of electrostatic ion cyclotron (EIC) waves in the electrodynamics of acceleration process. The instability is one of the fundamental of a current carrying magnetized plasma. The EIC instability has the lowest threshold current among the current driven instabilities. On the basis of local analysis where inhomogeneities like the magnetic shear and the finite width current channel, have been ignored which is prevalent in the magnetospheric environment. On the basis of non-local analysis interesting modification has been incorporated by the inclusion of magnetic shear. In this paper we provide an analytical approach for the non-local treatment of current driven electrostatic waves in presence of parallel electric field. The growth rate is significantly influenced by the field aligned electron drift. The presence of electric field enhances the growth of EIC waves while magnetic shear stabilizes the system.