A Modular Peel Fixture for Tape Peel Tests on Immovable Substrates

Background

Peel tests are frequently used to perform measurements of adhesive strength for pressure sensitive adhesive (PSA) tapes. Current lab methodologies for 90° peel tests translate the model substrate orthogonally to the peel direction in order to maintain the peel angle, precluding testing from immovable substrates.

Objective

It was our objective to develop a peel fixture capable of testing temporary pavement marking (TPM) tapes and other PSA tapes from immovable substrates such as roadways surfaces.

Methods

We present a modular peel fixture for conducting peel experiments directly on immovable substrates. The fixture was validated through a series of peel tests on consumer tapes to reproduce the linear width dependence and viscoelastic rate dependence found in traditional peeling setups. To test the capabilities of the fixture, a series of peel tests were conducted with various tapes on controlled surfaces, and a commercial tape on various immovable substrates.

Results

We demonstrate the ability of our fixture to reproduce results reported for traditional peel tests from literature. In addition, we were able to conduct peel tests directly on immovable substrates such as the benchtop.

Conclusions

This fixture shows potential for both traditional peeling tests, and for use in in-situ peel experiments from substrates relevant to the end application of the PSA tape.

     

Conservative and Semismooth Derivatives are Equivalent for Semialgebraic Maps

Set-Valued and Variational Analysis - Subgradient and Newton algorithms for nonsmooth optimization require generalized derivatives to satisfy subtle approximation properties: conservativity for the...     

High Blocking Temperature of Magnetization and Giant Coercivity in the Azafullerene Tb2@C79N with a Single‐Electron Terbium–Terbium Bond

The azafullerene Tb₂@C₇₉N is found to be a single‐molecule magnet with a high 100‐s blocking temperature of magnetization of 24 K and large coercivity. Tb magnetic moments with an easy‐axis single‐ion magnetic anisotropy are strongly coupled by the unpaired spin of the single‐electron Tb?Tb bond. Relaxation of magnetization in Tb₂@C₇₉N below 15 K proceeds via quantum tunneling of magnetization with the characteristic time τ_QTM=16 462±1230 s. At higher temperature, relaxation follows the Orbach mechanism with a barrier of 757±4 K, corresponding to the excited states, in which one of the Tb spins is flipped.     

Chemorheology investigation of a glassy epoxy thermoset on tensile plastic flow and fracture morphology

Reproducible and uncharacteristic tensile stress–strain behavior of cured glassy epoxy‐amine networks produces distinctive fracture surfaces. Test specimens exhibiting plastic flow result in mirror‐like fracture surfaces, whereas samples that fail during yield or strain softening regions possess nominal mirror‐mist‐hackle topography. Atomic force microscopy and scanning electron microscopy reveal branched nodule morphologies in the 50‐nm size scale that may be responsible for the unusual tensile properties. Current hypothesis is that plastic flow of the glassy thermoset occurs through the existence and deformation of these nodular nanostructures. The thermal cure profile of the epoxy‐amine thermoset affects the size and formation of the nodular nanostructure. Eliminating vitrification during thermoset polymerization forms a more continuous phase, reduction in size of the nodules, and eliminates the capacity of the material to yield in plastic flow. This maximizes nanostructure connectivity of the glassy epoxy‐amine thermoset and reduces strain to failure significantly. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1333–1344.     

Saturation of Berge hypergraphs

Given a graph $F$, a hypergraph is a Berge- $F$ if it can be obtained by expanding each edge in $F$ to a hyperedge containing it. A hypergraph $H$ is Berge-$F$-saturated if $H$ does not contain a subhypergraph that is a Berge-$F$, but for any edge $e\in E\left(\overline{H}\right)$, $H+e$ does. The $k$-uniform saturation number of Berge-$F$ is the minimum number of edges in a $k$-uniform Berge-$F$-saturated hypergraph on $n$ vertices. For $k=2$ this definition coincides with the classical definition of saturation for graphs. In this paper we study the saturation numbers for Berge triangles, paths, cycles, stars and matchings in $k$-uniform hypergraphs.     

Coatings with thermally switchable surface energy produced from poly(ethylene oxide)-poly(dimethylsiloxane) block copolymer films

This work explores coatings with thermally switchable wetting behavior, based on block copolymers that possess both hydrophilic and hydrophobic segments. The amphiphilic block copolymers were synthesized by coupling allyl-ended poly(ethylene oxide) (PEO) and hydride-ended poly(dimethylsiloxane) (PDMS) oligomers via a Pt catalyst. One near-symmetric diblock possessed an order-disorder transition temperature (T_ODT) of 64 °C. When cooled through T_ODT in ambient air, the PDMS domains wet the film's surface, producing a hydrophobic coating with a water contact angle (CA) = 90°. However, when cooled in humidified air, hydrophilic PEO domains form at the surface, yielding CA = 30–40°. The coatings can be reversibly switched between the two states by reheating above T_ODT, in the appropriate environment, and then cooling, rapidly generating the desired room-temperature surface wettability. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 135–140     

An open source ion gate pulser for ion mobility spectrometry

Excluding the ion source, an ion mobility spectrometer is fundamentally comprised of drift chamber, ion gate, pulsing electronics, and a mechanism for amplifying and recording ion signals. Historically, the solutions to each of these challenges have been custom and rarely replicated exactly. For the IMS research community few detailed resources exist that explicitly detail the construction and operation of ion mobility systems. In an effort to address this knowledge gap we outline a solution to one of the key aspects of a drift tube ion mobility system, the ion gate pulser. Bradbury-Nielsen or Tyndall ion gates are found in nearly every research-grade and commercial IMS system. While conceptually simple, these gate structures often require custom, high-voltage, floating electronics. In this report we detail the operation and performance characteristics of a wifi-enabled, MOSFET-based pulser design that uses a lithium-polymer battery and does not require high voltage isolation transformers. Currently, each output of this circuit follows a TTL signal with ~20 ns rise and fall times, pulses up to +/? 200 V, and is entirely isolated using fiber optics. Detailed schematics and source code are provided to enable continued use of robust pulsing electronics that ease experimental efforts for future comparison.     

A Direct Construction of Nontransitive Dice Sets

In this paper, we give a direct construction for a set of dice realizing any given tournament T. The construction for a tournament with n vertices requires dice with n sides if n is odd, sides if n is divisible by 4, and sides if mod 4. This appears to be the most efficient general construction to date. Our construction relies only on a standard construction from graph theory.