污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能研究

亚甲基蓝和环丙沙星是水体中2种污染物, 对生态环境有潜在危害. 本文以市政剩余活性污泥为原料, 氯化锌为活化剂热解制备污泥基吸附剂, 研究盐酸酸洗浓度、氯化锌浓度、热解温度、热解时间等对污泥基吸附剂吸附水中亚甲基蓝和环丙沙星性能的影响. 结果表明 (1)污泥基吸附剂对亚甲基蓝的吸附性能随盐酸酸洗浓度的增大而增加, 对环丙沙星的吸附性能则随盐酸酸洗浓度的增大呈先降后增趋势, 两者均在1.500mol·L-1盐酸浓度下取得最优值. (2)污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能随氯化锌浓度和热解温度的增加呈先升后降趋势, 在氯化锌浓度为4.0mol·L-1、热解温度为500℃时有最优值; 随着热解时间的延长, 污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能分别在500℃热解70min和80min时有最优值. (3)污泥基吸附剂的最佳制备条件为 氯化锌4.0mol·L-1活化2h、500℃热解70min和80min、1.500mol·L-1盐酸酸洗; 以此制得的污泥基吸附剂对亚甲基蓝和环丙沙星的去除率分别为97.7%和96.4%, 平衡吸附量分别为97.9mg·g-1和3.9mg·g-1, 且污泥基吸附剂对亚甲基蓝和环丙沙星的吸附过程均符合准二级动力学方程.     

Fundamental Relation Between Entropy Production and Heat Current

Journal of Statistical Physics - We investigate the fundamental relation between entropy production rate and the speed of energy exchange between a system and baths in classical Markov processes....     

Microwave‐assisted polycondensation of 4‐octylaniline with dibromoarylene

The Pd‐catalyzed polycondensation of 4‐octylaniline with various dibromoarylenes was carried out under microwave heating. Microwave heating led to a decrease in the reaction time and an increase in the molecular weight of the polymers as compared to conventional heating. Microwave heating also allowed the catalyst loading to be reduced to 1 mol %, yielding polymerization results that were comparable to those under conventional heating and 5 mol % catalyst. Investigations regarding field‐effect transistors and organic photovoltaic cells using the obtained poly(arylamine) with azobenzene units revealed that increasing the molecular weight of the polymer led to improved device performance, including hole mobility and power conversion efficiency. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 536–542     

RhIII-Catalyzed Double Dehydrogenative Coupling of Free 1-Naphthylamines with α,β-Unsaturated Esters

The Rh^III-catalyzed, consecutive double C−H oxidative coupling of free 1-naphthylamine and α,β-unsaturated esters through C−H/C−H and C−H/N−H bonds is reported. The one step reaction leads to the formation of biologically important alkylidene-1,2-dihydrobenzo[cd]indoles scaffolds. This efficient process is much more synthetically convenient and useful than others because the starting materials, such as 1-naphthylamine derivatives are readily available and the free amine serves as a directing group.     

Total Synthesis of Terpioside B

The first total synthesis of terpioside B ( 1 ) has been accomplished. Key steps include the stereoselective installments of a set of challenging 1,2-cis-glycosidic linkages. Thus, α(1,4)-linked d -galactoside was effectively constructed from a 1,2-anhydrogalactose donor and an unprotected 1,6-anhydrogalactose acceptor by using a boron-mediated aglycon delivery (BMAD) method. In addition, α-l -fucofuranosides were stereoselectively and simultaneously constructed by remote group-assisted 1,2-cis-α-stereoselective glycosylations.     

Synthesis of Organosilyl-Functionalized Cage-Type Germanoxanes Containing Fluoride Ions

Eight corners of a double-four ring cage-type germanoxane, containing a fluoride ion, were successfully silylated by the combination of chlorosilanes and silazanes. Three different silyl groups, trimethylsilyl, dimethylsilyl, and dimethylvinylsilyl, were attached on the corners of germanoxane cage. The solubility and reactivity of the cage modified with dimethylvinylsilyl groups were significantly increased, allowing for further reaction. Hydrosilylation reaction between dimethylvinylsilylated cage geramanoxanes and dimethylsilylated cage siloxanes afforded porous solids. Functionalization of the corners of germanoxanes with silyl groups should provide valuable building blocks in various functional materials.     

Triostin A Derived Cyclopeptide as Architectural Template for the Alignment of Four Recognition Units

The DNA bisintercalator triostin A is structurally based on a disulfide-bridged depsipeptide scaffold that provides preorganization of two quinoxaline units in 10.5 Å distance. Triostin A analogues are synthesized with nucleobase recognition units replacing the quinoxalines and containing two additional recognition units in between. Thus, four nucleobase recognition units are organized on a rigid template, well suited for DNA double strand interactions. The new tetra-nucleobase binders are synthesized as aza-TANDEM derivatives lacking the N-methylation of triostin A and based on a cyclopeptide backbone. Synthesis of two tetra-nucleobase aza-TANDEM derivatives is established, DNA interaction analyzed by microscale thermophoresis, cytotoxic activity studied and a nucleobase sequence dependent self-aggregation investigated by mass spectrometry.     

Synthesis of conjugated polymers possessing diketopyrrolopyrrole units bearing phenyl,pyridyl, and thiazolyl groups by direct arylation polycondensation: Effects of aromatic groups in DPP on physical properties

Conjugated polymers containing phenyl‐, pyridyl‐, and thiazolyl‐flanked diketopyrrolopyrrole (DPP) were synthesized by direct arylation polycondensation of 3,4‐ethylenedioxythiophene derivatives and dibrominated DPP‐based monomers, in order to probe the effects of the aromatic groups in the DPP units on the absorption property, energy level, and crystallinity. A polymer possessing thiazolyl‐flanked DPP units was found to display long‐wavelength absorption properties and higher crystallinity than the polymers bearing phenyl‐ and pyridyl‐flanked DPP units. These features of the thiazolyl‐based polymer were afforded by its coplanar structure of the main chain. The synthesized polymers showed semiconducting properties in organic field effect transistors and organic photovoltaics. Direct arylation polycondensation is an efficient synthetic method that affords a series of DPP‐based polymers in a simple fashion and, thus, helping in a comprehensive understanding on the relationship between the aromatic groups in DPP units and their physical properties. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2337–2345