Polymerization behaviors of racemic and chiral amphiphilic monomers in organized bilayer membranes of lamellar liquid crystalline phase

A racemic amphiphilic monomer, n‐dodecyl glyceryl itaconate (DGI), forms bilayer membranes in water in the presence of small amount of ionic cosurfactant and shows iridescent color. A chiral DGI, S‐DGI, also shows an iridescent property, but with a rather red shift in the color, which can be ascribed to the increased packing density of the monomer in the bilayer membranes. Chrial DGI has a more compact packing density than racemic one owing to closer distance between the monomer molecules; the conversion rate, however, is slower than that of racemic one when H₂O₂ is used as an initiator. When the initiator is changed to an amphiphilic one, 4‐(2‐hydroxyethoxy) phenyl‐(2‐hydroxy‐2‐propyl) ketone (Irgacure 2959), the chiral DGI shows even a little faster conversion rate than that of racemic one. The NMR chemical shift results of protons in benzene ring show that the molecules of Irgacure 2959 insert into the bilayer membranes. The molecular weights of the corresponding polymers prove that the initiation by H₂O₂ is restricted compared to that by Irgacure 2959. It is concluded that the decelerated polymerization behavior of chiral DGI initiated by H₂O₂ is a result of limited diffusion of the initiator into the lamellar bilayer structures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4891–4900, 2007     

Estimation of growth rate in unidirectionally solidified multicrystalline silicon by the growth-induced striation method

Multicrystalline silicon was grown by unidirectional solidification method using the accelerated crucible rotation technique. The application of the accelerated crucible rotation technique in unidirectional solidification method induced growth striations across the axial direction of the grown crystal. This striation pattern was observed from carbon concentration distribution, obtained by using Fourier transform infrared spectroscopy. The generated striation pattern was found to be weak and discontinuous. Some striations were absent, probably due to back melting, caused during each crucible rotation. From the growth striations and applied time period in crucible rotation, the growth rate was estimated by using Fourier transformation analysis.     

Control Policy for a Manufacturing System with Random Yield and Rework

We develop a production policy that controls work-in-process (WIP) levels and satisfies demand in a multistage manufacturing system with significant uncertainty in yield, rework, and demand. The problem addressed in this paper is more general than those in the literature in three aspects: (i) multiple products are processed at multiple workstations, and the capacity of each workstation is limited and shared by multiple operations; (ii) the behavior of a production policy is investigated over an infinite-time horizon, and thus the system stability can be evaluated; (iii) the representation of yield and rework uncertainty is generalized. Generalizing both the system structure and the nature of uncertainty requires a new mathematical development in the theory of infinite-horizon stochastic dynamic programming. The theoretical contributions of this paper are the existence proofs of the optimal stationary control for a stochastic dynamic programming problem and the finite covariances of WIP and production levels under the general expression of uncertainty. We develop a simple and explicit sufficient condition that guarantees the existence of both the optimal stationary control and the system stability. We describe how a production policy can be constructed for the manufacturing system based on the propositions derived.     

Electrical properties and memory effect in the field effect transistor based on organic ferroelectric insulator and pentacene

We have fabricated a field effect transistor (FET) based on an organic ferroelectric insulator and molecular conductor, and investigated the electrical properties and memory effects on the PEN-FET. We have observed a drastic change in the drain current at around the coercive electric fieldE _c of the organic ferroelectric insulator in not only a FET (PEN-FET) based on a pentacene (PEN) film but also a FET (IPEN-FET) based on an iodine doped PEN film. The magnitude of the change of the drain current for the IPEN-FET is 200 times larger than that for the PEN-FET. It is expected from these results that the PEN-FET (especially the IPEN-FET) is an improvement in such devices, since it operates at a low gate electric field accompanied by the appearance of the spontaneous polarization in the organic ferroelectric insulator. In addition, we have found that the drain current for the PEN-FET does not return to the initial drain current ofE _G =0 V/cm for more than one week, even if the gate electric field is changed to 0 V/cm from 500 V/cm(>E _c ). From these results, it is suggested that the PEN-FET becomes a memory device.     

Recording and reading of three-dimensional optical memory in glasses

We report on three-dimensional (3D) optical memory recording and reading in glass by femtosecond pulses. Optically induced dielectric breakdown of glass is a mechanism of recording. The formulae of dielectric breakdown presented are applicable, in principle, for any crystalline or amorphous dielectric material. Scaling dependences of the probabilities of multi-photon and impact ionization are given. The measured threshold of an in-bulk dielectric breakdown of silica was reproduced numerically by implementing the ionization potential of Si (8.15 eV) for calculations. Exact measures of focal spot size and pulse duration at the focus allowed us to evaluate the intensity of a pulse during recording of 3D optical memory bits with high accuracy. The readout of the 3D optical memory was carried out by the white-light continuum generated from the previously damaged sites (recorded memory bits). The mechanism of the readout was a four-photon parametric interaction. PACS 42.65.Jx; 42.65.Ky; 42.70.Ce; 42.79.Vb     

Design of a widely tunable laser with a chirped ladder filter

We theoretically investigated a digitally tunable laser with a chirped ladder filter and a ring resonator to obtain a wide wavelength tuning range covering the whole C- or L- band. The clear relation between the tuning range and laser structure, especially the ladder filter, is described analytically. The introduction of a chirped structure into a ladder filter is effective in achieving both wide tunability and a stable lasing mode. A numerical simulation based on multimode rate equations shows that a tuning range of over 40 nm and a mode suppression ratio over 40 dB can be achieved by introducing a chirped ladder filter.     

Superstring thermodynamics and its application to cosmology

The thermodynamics of superstring theories (SST-I, SST-II and heterotic string theory) and its application to the cosmology are studied. The free energy of superstring gas is calculated in the one-loop approximation and the stability of the extra torus dimensions is discussed. Assuming that the Einstein equation dictates the evolution of the universe, we show that matter dominated universe filled with massive particles would never be realized at the beginning of the universe, contrary to the naive expectation in the superstring cosmology.     

Strength of cylinder joint adhesively bonded by coupling

Summary A method of joining two metal cylindrical shafts with adhesive coupling is proposed. Two cylindrical shafts with the same diameter are connected by bonding through a cylindrical coupling with epoxy resin. The strength of the shaft joint under tensile loading and torsional loading is investigated analytically and experimentally. The stress and strain distributions of the shaft joint is analyzed by the finite element method. The analyzed strain distributions in the joint are compared with experimental values. The joint strength is predicted by applying the strength laws of shafts, coupling, adhesive layer and adhesive interface between shaft and adhesive coupling. The effects of the coupling dimension on the joint strength are examined. It is shown that the adhesive shaft joint can transfer the load by which the cylindrical shafts are plastically deformed.This paper was refined by the author, K. Ikegami, during statying at Technische Universität München under the support of Deutscher Akademischer Austauschdients. The author is grateful to Professor Lippmann of Technische Universität München who is the host professor of the support.     

The origin of enhanced photocatalytic decomposition of ATP on TiO2 powders as induced by surface modification with lanthanide ions: important roles of ATP adsorption to the modified surface

Surface modification of TiO₂ powders with lanthanide salts (EuCl₃ or YbCl₃) enhanced photocatalytic decomposition of ATP. In comparison with the unmodified catalyst, a 3-fold increase in the ATP decay rate was observed with TiO₂ powders as prepared in 5 mM EuCl₃ (or YbCl₃) solution. The reason was ascribed to enrichment of ATP to TiO₂ powder with the lanthanide ions. Evidence was obtained by adsorption experiments where ATP concentration was monitored after dispersing TiO₂ powders into the solution. The ATP molecules adsorbed faster to TiO₂ powder and strongly stabilized there in the presence of Yb³⁺ than otherwise.     

Iron speciation related to color of Jurassic sedimentary rocks in Turpan Basin, northwest China

Mesozoic-Cenozoic reddish and green beds are widely distributed in northwest China. Mössbauer spectroscopy revealed that the composition of iron species varies with color in the middle-upper Jurassic sedimentary rocks from the Turpan Basin. Three main kinds of iron species were identified: (1) ferric iron of hematite (hem-Fe³⁺), (2) paramagnetic ferric iron (para-Fe³⁺), and (3) paramagnetic ferrous iron (para-Fe²⁺). Pyrite iron (pyr-Fe²⁺) was revealed only in a few samples. In general, there is a direct correlation between rock color, iron species and total iron content, however, in detail, this relationship is more complicated. The reddish rocks contain higher contents of total iron and hem-Fe³⁺, whereas the gray rocks contain much more para-Fe²⁺. However, relatively low hematite content cannot give red color to rocks, probably due to suppression by other pigments such as organic matter in black or chlorite in green. The dark or green rocks normally contain either only paramagnetic Fe²⁺ and paramagnetic Fe³⁺ species or these two species associated with hematite Fe³⁺, but the relative content of hematite species is lower. The variations of different iron species control lithological properties such as color and also may reflect the sedimentary conditions. Moreover, iron speciation in these rocks is one of the main factors, which result the color features of rocks in remote sensing imagery.This revised version was published online in November 2005 with corrections to the Cover Date.