Microfluidic HPLC‐Chip devices with integral channels containing methylstyrenic‐based monolithic media

Polyimide HPLC‐Chip devices containing poly(methylstyrene‐bis‐p‐vinylphenyl)ethane (MS/BVPE) stationary phase within the device channels and with wall attachment were prepared by thermally initiated free radical polymerization. The microfluidic devices were coupled to both UV and MS detectors. The potential of the MS/BVPE monolith as an alternative separation media within chip devices was investigated by side‐by‐side comparisons to particulate media within commercial devices. The chromatographic behavior of this stationary phase was comparable to particulate media for separations of proteins as the average peak width at half‐height was equal (6.2 s) for a separation within 8 min under gradient elution conditions. The ability to control the porosity characteristics of the MS/BVPE monolith with changes in polymerization time also extended its utility into small analyte (< 500 Da) applications, although more optimization is needed to match conventional RP media for these applications. The good mechanical stability of the MS/BVPE monolith within the microdevices enabled excellent run‐to‐run repeatability (%RSD retention time (? 0.16) and chip‐to‐chip reproducibility (%RSD retention time (1.4). The use of this material within enrichment channels also shows its potential value in more complex work flows.     

Effect of Pr-Ca substitution on the transport and magnetic behavior of LaMnO3 perovskite

The effect of simultaneous substitution of a fluctuating cation and a divalent cation in LaMnO₃ perovskite modifies the properties of the material to exhibit large valence colossal magnetoresistance (CMR) effect. A good example of these properties is (La_1−2x Pr _x Ca _x )MnO₃ (LPCMO) type CMR material. In this communication it is reported that, with the increase in x (for x=0.1, 0.15, 0.2), the T _c varies between 100 and 120 K with improvisation in metal-insulator transition. Interestingly, resistance increases with x from few hundred ohms to few kilo ohms with corresponding decrease in the unit cell volume. The results of the studies using X-ray diffraction (XRD), electrical resistivity, magnetoresistance and ac susceptibility measurements on LPCMO samples for understanding the structural, transport and magnetic properties are discussed in detail.     

A Visible Spectrophotometric Assay for Submicrogram Quantities of DNA, Including PCR-Amplified DNA

The use of the cationic thiazine dye toluidine blue for solution measurements of DNA in the submicrogram range was studied with particular regard to the measurement of the small quantities of DNA synthesized in a typical polymerase chain reaction (PCR). Tolouidine blue shows a decrease in absorption at its wavelength of maximal absorption, 628 nm, on binding DNA in low concentrations. Using toluidine blue at 2 × 10⁻⁵ M, there was a linear response to increasing DNA concentrations up to 2000 ng of DNA in a 500 μl assay. The lower limit of detection was 24 ng of DNA. The assay was found to be sufficiently sensitive to measure the DNA produced in a PCR, and to distinguish PCRs that amplified a product from those in which amplification did not occur. The effects of selected metal ions and nonmetals on the assay were assessed. Of the compounds tested only sodium dodecyl sulfate was found to be incompatible with the assay. Compared to other colorimetric DNA assays, the toluidine blue assay is 10- to 100-fold more sensitive, approaching the sensitivity achieved by fluorometric DNA assays. The color change on binding DNA is immediate, and takes place at room temperature, thus allowing for rapid measurements to be made. The toluidine blue assay extends the useful range of visible spectrophotometric DNA assays well into the submicrogram range and is suitable for detection and measurement of the microgram quantities of DNA produced in a typical PCR.     

Monolithic porous polymer stationary phases in polyimide chips for the fast high-performance liquid chromatography separation of proteins and peptides

Poly(lauryl methacrylate-co-ethylene dimethacrylate) and poly(styrene-co-divinylbenzene) stationary phases in monolithic format have been prepared by thermally initiated free radical polymerization within polyimide chips featuring channels having a cross-section of 200micromx200microm and a length of 6.8cm. These chips were then used for the separation of a mixture of proteins including ribonuclease A, myoglobin, cytochrome c, and ovalbumin, as well as peptides. The separations were monitored by UV adsorption. Both the monolithic phases based on methacrylate and on styrene chemistries enabled the rapid baseline separation of most of the test mixtures. Best performance was achieved with the styrenic monolith leading to fast baseline separation of all four proteins in less than 2.5min. The in situ monolith preparation process affords microfluidic devices exhibiting good batch-to-batch and injection-to-injection repeatability.     

An experimental study of chromatographic dynamics in open and packed non-cylindrical conduits

A systematic investigation of the influence of the perimeter shape of open and particle packed fused silica capillaries on chromatographic properties such as resistance to flow and dispersion of solutes propelled through these channels has been conducted. Verifications of these uncommon experiments with existing theoretical treatments are presented and the insights transferred to a novel polymer chip design with integrated facilities for complex separations. A comparison of the chromatographic performance of a real life proteomics sample on this chip with a capillary column of "similar" dimensions is presented.     

Integrated microfluidic devices with enhanced separation performance: application to phosphoproteome analyses of differentiated cell model systems

This work reports on the application of a microfluidic device integrating nanoscale LC to nanoelectrospray MS (nano-LC-chip-MS) for the analysis of complex protein digests. Peak profile analyses of more than 700 peptide ions, reproducibly detected across replicate nano-LC-chip-MS runs (n = 5), indicated that the system provided RSD values of 0.24% on retention time, +/- 30 ppm on m/z measurement and +/- 30% variation on intensity over three orders of magnitude. RP adsorbant media with different alkyl chains and particle size packed in both trapping and separation channels were investigated to improve the chromatographic performance of this system. A two-fold improvement in chromatographic peak capacity was achieved using microfluidic devices comprising a 5 mircrom C3 trap with 2.5 microm C18 trap separation channel compared to the traditional 5 microm C18 stationary phase. Enhanced sample selectivity for the identification of phosphopeptides was obtained by combining immobilized metal affinity media prior to peptide separation on the RP microfluidic device. This system was evaluated in the context of differential phosphoproteome analyses to identify changes in signaling events and protein expression of human monocytes following the administration of phorbol ester.     

A simple positron lifetime system suitable for low density gases

A conventional positron lifetime system is described which gives data of high statistical accuracy and is especially suitable for gases at low density. Several factors contribute to the significant improvement in performance. The fraction of positrons annihilating in the gas is greatly enhanced by backscattering, and the small dimensions of the pressure vessel coupled with large plastic scintillators yields about 1200 coincidence events per second. Simple electronics are used with no side channel gating, and very clean spectra are obtained with overall resolution better than 1.5 nsec. The true start and stop pulses are counted, which enables the data to be treated by the authors' signal restoration method. The results of measurements in Ar?CO mixtures and data for H₂ and D₂ are presented and discussed.     

A general method for the alpha-acyloxylation of carbonyl compounds

[chemical reaction: see text]. A simple, one-pot method for the alpha-acyloxylation of carbonyl compounds that proceeds at room temperature in the presence of both moisture and air has been developed. Treatment of a variety of aldehydes and both cyclic and acyclic ketones with N-methyl-O-benzoylhydroxylamine hydrochloride provides the alpha-functionalized product in 69-92% isolated yield. The transformation is tolerant of a wide range of functional groups and, significantly, is regiospecific in the discrimination of secondary over primary centers in the case of nonsymmetrical substrates.