<Emphasis Type="Italic">FCC/BCC</Emphasis> competition and enhancement of saturation magnetization in nanocrystalline Co-Ni-Fe films

The structure, chemical composition, and magnetic properties of electrochemically deposited nanocrystalline Co-Ni-Fe films were investigated using a number of techniques. A high saturation magnetic induction up to B _s = 21 kG was attained. An enhancement of the saturation magnetization compared to the ideal anticipated one was revealed, which correlated with the nonlinear behavior of the structural phase composition and lattice parameters with the change of the composition. The text was submitted by the authors in English.     

Numerical Modeling of Interior Ballistics Processes in Light Gas Guns

An improved procedure for modeling the operation of a light-gas gun is proposed. The motion of working bodies in both the firing chamber and the light-gas chamber is studied within the framework of the mechanics of heterogeneous media. The problem of barrel heating taking into account its melting and removal of thermal ablation products into the medium inside the bore is solved in a coupled formulation. Heat and mass transfer and friction on the barrel surface are calculated using empirical dependences. The deformable piston is considered compressible and elastoviscoplastic. Allowance is made for the presence of a clearance between the lateral surface of the piston and the barrel bore walls and the associated gas flow between the firing and the light-gas chamber. Calculation results are given.     

Effect of laser erosion on the copper and zinc concentrations in the surface layer of brass

A REMMA 102 scanning electron microscope equipped with semiconductor and wave spectrometers is applied to measure the copper and zinc concentrations in the surface layers of an M161 brass sample and the same sample subjected to a focused laser radiation. The results are compared with the results obtained with an MS3101 laser mass spectrometer having a laser-plasma ion source. The laser-assisted erosion of the surface layer in the brass is shown to significantly change the copper and zinc concentrations. It is found that, when the craters produced by laser pulses on the initial surface do not overlap, the copper and zinc contents in the laser-induced plasma correspond to their contents in the sample.     

Stimulating effect of graphite admixture on hydrogen sorption-desorption properties of mechanically activated titanium powder

The effect of graphite admixture on hydrogen sorption-desorption properties of mechanically activated electron microscopy, temperature-programmed reaction, and temperature-programmed desorption techniques. The major effect of graphite addition was found to be the formation of microporous carbon matrix particles containing randomly distributed titanium particles only several nanometers in diameter. This powder architecture enhances hydrogen transport to the titanium surface without hindrances and promotes titanium-hydrogen interaction by modifying the titanium surface and subsurface layers with interstitial carbon atoms.     

Mass spectrometric study of mixed fluorinated rare earth element β-diketonates with triphenylphosphine oxide

A series of new adducts of fluorinated REE -diketonates with triphenylphosphine oxide was synthesized. The paths of their fragmentation under electron impact were investigated. It was shown that in contrast to the complex with 1,1,1,2,2,3,3-heptafluoro-7,7-dimethyloctane-4,6-dione, the complexes of europium with 1-trifluoromethoxy-1,1-difluoro-5,5-dimethylhexane-2,4-dione and 1, 1,1-trifluoro-5,5-dimethylhexane-2,4-dione form dimeric associates in the gaseous phase. The reasons for this difference in the behavior of the complexes and the possible structure of one of the dimers are discussed.Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 26, No. 2, March–April, 1990.     

Effect of the extent of reduction of V2O5 on the adsorption of propylene and the oxidative dehydrogenation of propane to give propylene on V2O5 and V2O5/TiO2-SiO2

An increase in the propylene output in the oxidative dehydration of propane on V₂O₅/TiO₂-SiO₂ was observed after prior reduction of V₂O₅ in the reaction mixture to V₂O₄, which reduces the destructive chemisorption of propylene. A low titanium dioxide content in TiO₂-SiO₂ hinders the deep reduction of V₂O₅ to V₂O₃, which reduces the conversion of propane. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 6, pp. 373–378, November–December, 2007.     

Polysaccharides of brown algae VIII. A study of pelvecyan and sargassan by methylation

Conclusions It has been shown by the methylation method that pelvecyan and sargassan are polysaccharides of similar structures with a high degree of branching of the carbohydrate chains. Fucose, xylose, and galactose are located at the nonreducing ends of their molecules, and mannose and galactose form points of branching of the carbohydrate chains of these polysaccharides.The positions of the bonds between the monosaccharide residues in pelvecyan and sargassan have been determined.Pacific Ocean Institute of Bioorganic Chemistry, Far Eastern Scientific Center, Academy of Sciences of the USSR. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 142–145, March–April, 1974.     

Kinetic parameters of electroextraction of cobalt from aqueous solutions of cobalt and manganese sulfates

The effect exerted by cobalt(II) concentration in the initial solution and temperature on the kinetics of cobalt(II) electroextraction from cobalt(II) and manganese(II) sulfate solutions was studied. The kinetic parameters of the process were determined.     

Polysaccharides of brown algae IV. Fragmentation of the molecules of sargassan and pelvecyan

Summary It has been shown that the molecules of sargassan and pelvecyan each contain a linear high-molecular-weight fragment consisting of residues of glucuronic acid and mannose alternating with one another.Institute of Biologically Active Substances, Far Eastern Scientific Center, Academy of Sciences of the USSR. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 393–396, July–August, 1971.     

Influence of morphology and composition of fumed oxides on changes in their structural and adsorptive characteristics on hydrothermal treatment in steam phase at different temperatures

A series of fumed oxides such as silica, titania, alumina, silica/alumina (SA), silica/titania (ST), and alumina/silica/titania (AST), initial and hydrothermally treated (HTT) in the steam phase at T(HTT)=150, 250, and 350 degrees C was studied by adsorption, AFM, XRD, FTIR, and theoretical methods. Diminution of the size of primary particles (corresponding to increasing S(BET)) of initial silica and mixed oxides results in enhancement of their structural changes on HTT with elevating T(HTT) and increasing density of packing of primary particles in the secondary structures. Relative changes in the texture of treated fumed silicas are smaller than those of mesoporous silica gels occurring under similar HTT conditions. On HTT, aggregates of primary particles and their agglomerates become denser but their surface layers become looser because of transfer of silica fragments from one particle to another, and the smaller the initial primary particles, the greater the relative diminution of the specific surface area S(BET) for the same type of primary particle packing in aggregates. Relative changes in the pore volume V(p) (or V(BJHd)) on HTT are more complex than that of S(BET), as for many samples the V(p) value increases especially at T(HTT)=150 degrees C. Alumina and titania partially inhibit structural changes on HTT, which decrease in the series silica > SA > AST approximately ST.