Solvothermal synthesis of transition metal (iron/copper) and nitrogen co−doped carbon nanomaterials: comparing their peroxidase−like properties

Journal of Nanoparticle Research - Polycrystalline metallic copper nanoparticle samples with the average particle sizes ranging from 53 to 80 nm were controllably prepared by the wet...     

Piezoelectric Actuator Placement Optimization and Active Vibration Control of a Membrane Structure

The placement optimization of piezoelectric actuators and active vibration control of a membrane structure are studied in this paper. The classical linear quadratic regulator controllers are designed to suppress the unwanted vibration. Simulation results indicate that the optimal locations of piezoelectric actuators are affected deeply by the additional mass and stiffness of actuators, the computational efficiency of particle swarm optimizer is higher than that of genetic algorithm for this particular problem, and the control performance of optimally placed actuators is better than that of non-optimally placed actuators.     

Self-Healable Polyelectrolytes with Mechanical Enhancement for Flexible and Durable Supercapacitors

The practical application of advanced personalized electronics is inseparable from flexible, durable, and even self-healable energy storage devices. However, the mechanical and self-healing performance of supercapacitors is still limited at present. Herein, highly transparent, stretchable, and self-healable poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA)/poly(vinyl alcohol) (PVA)/LiCl polyelectrolytes were facilely prepared by one-step radical polymerization. The cooperation of PAMPSA and PVA significantly increased the mechanical and self-healing capacity of the polyelectrolyte, which exhibited superior stretchability of 938 %, stress of 112.68 kPa, good electrical performance (ionic conductivity up to 20.6 mS cm⁻¹), and high healing efficiency of 92.68 % after 24 h. After assembly with polypyrrole-coated single-walled carbon nanotubes, the resulting as-prepared supercapacitor had excellent electrochemical properties with high areal capacitance of 297 mF cm⁻² at 0.5 mA cm⁻² and good rate capability (218 mF cm⁻² at 5 mA cm⁻²). Besides, after cutting in two the supercapacitor recovered 99.2 % of its original specific capacitance after healing for 24 h at room temperature. The results also showed negligible change in the interior contact resistance of the supercapacitor after ten cutting/healing cycles. The present work provides a possible solution for the development of smart and durable energy storage devices with low cost for next-generation intelligent electronics.     

Development,validation and application of a UHPLC–MS/MS method for quantification of the adiponectin-derived active peptide ADP355 in rat plasma

A UHPLC–MS/MS method for the quantification of ADP355, an adiponectin-derived active peptide, was developed and validated. The extraction method employed simple protein precipitation using methanol and chromatographic separation was achieved on anAccucore™ RP-MS C₁₈ column (100 × 2.1 mm, 2.6 μm, 80 Å), using 0.1% formic acid in both water and acetonitrile with gradient elution at the flow rate of 400 μl/min within 4.0 min. Detections were performed under positive ion mode with multiple reaction monitoring ion transitions m/z 1109.2 → 309.8 and 871.4 → 310.1 for ADP355 and Jt003 respectively at unit resolution. The linearity range of the calibration curve was 2–1,000 ng/ml with a lower limit detection of 0.5 ng/ml. The selectivity, linearity, precision, accuracy, recovery, matrix effect and stability were validated, and all items met the requirement of US Food and Drug Administration guidance. This method was successfully applied to an intravenous pharmacokinetic study of ADP355 in rats and the in-vitro stability in rat serum, plasma and whole blood was also assessed.     

基于改进克隆选择算法的统一混沌系统同步控制与参数辨识

提出一种改进的克隆选择算法用于解决混沌系统的参数辨识问题.该算法利用抗体的高频变异和受体编辑两种机制有效平衡算法的全局探索与局部开发，并引入向精英抗体学习策略进一步提高算法的收敛质量.对10个优化问题的实验表明：所提出算法在求解精度、收敛速度以及稳定性方面具有更好的性能.以参数未知统一混沌系统的同步控制为研究对象，合理设计同步控制器，并对同步系统的稳定性进行理论分析.通过对同步比例因子的设置，实现统一混沌系统的完全同步、反同步、投影同步等多种同步方式.仿真实验结果表明该方法能够实现对未知系统参数的精确辨识以及驱动-响应系统的有效同步控制，验证了所提方法的可行性与有效性.     

基于微腔效应增强单层二硫化钨光吸收

提出基于金属薄膜-分布式布拉格反射器微腔效应增强单层二硫化钨光吸收的多层薄膜结构.运用光学传输矩阵理论研究了其输运特性,发现由于金属薄膜-分布式布拉格反射器的微腔效应,在间隔层和覆盖层之间形成电场强度极大值,有效促进入射光与单层二硫化钨的相互作用.综合优化金属层、间隔层和覆盖层厚度,单层二硫化钨在612 nm处的光吸收提高了38倍,达到78.42;.进一步探讨了光入射角、分布式布拉格反射器周期、间隔层折射率与单层二硫化钨光吸收的关系.研究结果表明,上述结构参数的变化可有效调控单层二硫化钨的吸收峰值.研究结果为制备高性能单层二硫化钨光电探测器等新型光电子器件提供了新思路.     

Preparation of copper ferrite by sol–gel method and the synergistic catalytic for the thermal decomposition of ammonium perchlorate

Journal of Sol-Gel Science and Technology - In the present work, copper ferrite was prepared by a simple and mild sol–gel method followed by low-temperature calcination, and characterized by...     

可待因及福尔可定的密度泛函理论计算模拟和表面增强拉曼光谱测定北大核心CSCD

运用密度泛函理论(DFT)对可待因及福尔可定进行几何构型优化,从而对标准品粉末的拉曼光谱的振动模式进行指认和归属,并与低浓度水平标准溶液的表面增强拉曼谱图进行比较。进一步优化了表面增强拉曼光谱检测条件,并摸索可待因及福尔可定的测定下限及定量分析的可行性。结果表明,可待因及福尔可定大部分特征峰拉曼位移的理论计算值、拉曼光谱测定值、表面增强拉曼光谱测定值是一致的,但会有一定程度的蓝移和红移;可待因、福尔可定的测定下限均为10 mg·L^(-1)。可待因在631.29 cm^(-1)和1 595.26 cm^(-1)处、福尔可定在628.58 cm^(-1)和1 251.41 cm^(-1)处的特征峰强度比值,与其对应的质量浓度(40~100 mg·L^(-1))呈线性关系。对空白基质进行加标回收试验,可待因和福尔可定的回收率分别为99.0%~105%和102%~104%,测定值的相对标准偏差(n=5)分别为5.3%,5.9%。上述方法可为这两种管制药品提供拉曼光谱检测的理论依据和快检支持。     

非惯性系下柔性悬臂梁的振动主动控制

采用变结构控制方法对非惯性系下柔性悬臂梁的振动主动控制进行研究．重点通过算例揭示一次近似模型与传统的零次近似模型的巨大差异，以及变结构方法在控制非惯性系下柔性悬臂梁的稳态振动的有效性．结果表明，当大范围旋转运动角速度较大时，传统零次近似模型不能对动力系统进行正确的数学描述；变结构控制方法能够使得非惯性系下梁的稳态振动得到完全镇定，且该方法对转动角速度变化具有较好的鲁棒性；采用零次近似模型进行控制设计的控制效果将在某一临界角速度条件下出现失效，该临界角速度值大于静止悬臂梁的基频．     

绕旋转圆柱流动涡尾流结构和临界状态特性

采用作者提出的基于区域分解，有限差分法与涡法杂交的数值方法，结合高阶隐式差分格式，和以修正的不完全ＬＵ分解为预处理器的共轭梯度法作求解器，系统地研究了雷诺数Ｒｅ＝１０００，旋转速度比α∈（０．５，３．２５）范围内，绕旋转圆柱从突然起到充分发展，长时间内尾流旋涡结构和阻力，升力系数的变化规律，计算所得流动图案与实验流场显示符合很好。数值试验证帝了临界状态的存在，并首次给出了临界状态时的旋涡结构特性。