Vertical distribution of the natural and artificial radionuclides in various soil profiles to investigate soil erosion

Vertical distributions of ¹³⁷Cs and ²¹⁰Pb in soil profiles were examined to study their availability in soil erosion at Gökova region where there exists intensive agricultural activities on sloppy fields. Since the mobility of these radionuclides depend on soil characteristics, soil samples were analyzed also for their physical and chemical properties. From ¹³⁷Cs inventories measured, erosion rates for cultivated and disturbed (no cultivation) soils were calculated to range from 79.1 to 6.5 t^.ha^-1.y^-1 and from 79.9 to 3.5 t^.ha^-1.y^-1, respectively. The ²¹⁰Pb technique is found to be not suitable for erosion determination for this area, presumably due to the coal-fired power plants operating in the region.     

Application of Phosphorus-31 Nuclear Magnetic Resonance Spectrosocopy for the Study of Human Diabetic Cataractogenesis

Intact human Senses incubated at 5.5 mM (normal) and 35.5 mM glucose were examined by phosphorus-31 nuclear magnetic resonance (31P NMR) spectroscopy. Lense in 35.5 mM glucose showed an altered metabolic steady-state characterized by a lowered adenosine triphosphate/inorganic orthophosphate ratio. ³¹P NMR spectroscopy can be used to measure metabolic changes in the lens. This model offers an important means to study dynamic metabolism in the human lens in the setting of diabetic cataractogenesis.     

Photopolymerization of enzymatically synthesized methacrylated poly(caprolactone) with poly(ethylene glycol) macromonomer

Polycaprolactone (PCL) based α,ω-methacrylated macromonomer (DMPCL) was synthesized via enzymatic ring-opening polymerization (eROP) by using Novozyme 435 as the enzyme immobilized catalyst. DMPCL was further photopolymerized with monofunctional poly(ethylene glycol) methyl ether methacrylate (PEGMA-950) macromonomer and trimethylolpropane triacrylate (TMPTA) as tri-functionalized crosslinking agent in glass vials when CHCl₃ was the solvent and Irgacure 819 was the photoinitiator. Ultraviolet (UV) Light Emitting Diode (LED) bulbs enabled photoinduced reactions at room temperature with low heat generation and high reaction efficiency. The obtained gels were characterized with Fourier Transform Infrared Spectroscopy (FT-IR) and Differential Scanning Calorimetry (DSC). DMPCL participated as an effective crosslinking agent in the photopolymerization of PEGMA-950. Combined usage of DMPCL and PEGMA-950 resulted in significantly more effective polymerization than the separate photopolymerizations of these macromonomers.     

A Ready‐to‐Use Electrochemical Kit Design for the Diagnosis of Single Nucleotide Polymorphisms

In this study, for the first time a model electrochemical kit was constructed for the detection of a functional polymorphism in catechol‐O‐methyl transferase (COMT) gene which is important for diagnosis of neuropsychiatric disorders as Alzheimer disease. The disposable pencil graphite electrode (PGE) is designed as a “kit” and the probe DNA covered PGE can detect single nucleotide polymorphisms (SNPs) from real samples based on the guanine oxidation signal even after 5 months of kit preparation (150 days durability).The detection limit (S/N=3) of the biosensor was calculated as 1.18 pmol of synthetic target sequence and 6.09×10⁵ molecules of real samples in 30 min detection time.     

A Pencil Graphite Electrode In Situ Modified by Monovalent Copper: a Promising Tool for the Determination of Methylxanthines

A pencil graphite electrode (PeGE) exhibits a promising tool for the electrochemical analysis of xanthine (Xan) and its N‐methyl derivatives (1‐, 3‐, 7‐ and 9‐mXan). The changes in their level in blood, serum, urine, as products of purine catabolism, can indicate the development of some diseases. Sensitivity‐enhanced voltammetric detection of mXans was achieved by forming of complex with Cu(I) and application of elimination procedure. The Cu(I)‐mXan complex was identified by means of titration of electrochemically produced cuprous ions by mXan. Our approach enables separation of overlapped mXan oxidation signals. Based on the obtained results, we found that the effect of methyl group position on the xanthine skeleton was significant and it was also discussed.     

Acoustic Analysis Findings in Objective Laryngopharyngeal Reflux Patients

OBJECTIVE: The aim of this study was to identify the effects of objective laryngopharyngeal reflux (LPR) on the acoustic parameters of patients by comparing their voice samples with that of control subjects. STUDY DESIGN: Prospective study in two tertiary reference hospitals. METHODS: 48 consecutive patients with symptoms related to LPR and 64 control subjects were included in the study. Suspected LPR patients underwent a 24-hour ambulatory pH monitoring, and 25 (52%) of them were shown to have objective LPR. Acoustical evaluation results of objective LPR patients were compared with that of symptomatic LPR patients and control subjects. RESULTS: All frequency perturbation values obtained from objective and symptomatic LPR patients were higher than the control subjects (P<0.01). Mean fundamental frequency, amplitude perturbation measures, and noise-to-harmonics ratio were not significantly different between groups. CONCLUSION: LPR patients have significantly different frequency perturbation values than control subjects.     

Phase formation and magnetic anomalies in RuSr2RECu2O8 (RE=Eu, Gd, Ho) samples

We have synthesized bulk RuSr₂RECu₂O₈ (RE=Eu, Gd and Ho) compounds using the ammonium nitrate melt technique. The phase purity of the samples decreases as the ionic radii of the RE element decreases. For RE=Ho, magnetic Sr₂HoRuO₆ and CuO were formed instead of the 1212 phase. The magnetization vs. temperature curves of the samples are similar to those of the samples prepared using the solid-state reaction method. The magnetic anomalies observed in M-T curves are discussed.     

THE EFFECT OF BILINEAR BEHAVIOUR ON THE DIRECTION AND MAGNITUDE OF THE PEELING MOMENT IN A BI-MATERIAL BEAM

In this work a bi-material beam exhibiting partly bilinear behaviour under a uniform temperature change is analyzed. The essence of solution is based on the approach of Timoshenko’s mechanics of materials. The main aim of the present analysis is to understand the effect of the bilinear behaviour on the peeling moment. This theoretical mechanics model mentioned here can give us useful insights to improve the resistance against the delamination.     

On the ionic conductivity of polymer electrolytes in terms of hole fraction

A theoretical model to interpret the conductivity of ions through polymer electrolytes is established in terms of the temperature and pressure‐dependent hole fraction computed from Simha‐Somcynsky hole theory. The model successfully linearizes the logarithm of PPG and PEG conductivity data with NaCF₃SO₃ in a 20:1 ratio for a broad range of temperature and pressure. The conductivity parameter and transmission coefficient with an additive hole fraction constant are discussed and compared for both species. The derivative of the logarithm of conductivity with respect to the hole fraction decreases inversely with the hole fraction and saturates at about 0.08 and 0.12 hole fractions for PPG and PEG, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2249–2254, 2008     

Fabrication of SERS active gold nanorods using benzalkonium chloride,and their application to an immunoassay for potato virus X

The authors report on a robust method for the synthesis of gold nanorods (AuNRs) with tunable dimensions and longitudinal surface plasmon resonance. The method relies on seed-mediated particle growth in the presence of benzalkonium chloride (BAC) in place of the widely used surfactant cetyltrimethyl ammonium bromide (CTAB). Uniform AuNRs were obtained by particle growth in solution, and BAC is found to stabilize the AuNRs for >1 year. The SERS activity of the resulting AuNRs is essentially identical to that of CTAB-protected nanorods. The SERS activity of the BAC protected nanorods was applied to the quantitative analysis of potato virus X (PVX). The calibration plot for PVX is linear in the 10 to 750 ng?mL^?1 concentration range, and the detection limit is 2.2 ng?mL^?1.

Open image in new window

Graphical abstract SERS-active gold nanorods (AuNRs) have been prepared by using benzalkonium chloride as stabilization agent. Effects of chemical parameters on AuNRs have been explored and AuNRs were used in quantitative analysis of potato virus X (PVX).