Gold nanorods (AuNRs) show high potential in electrochemical sensing owing to their excellent conductivity, electrocatalytic activity, selectivity and sensitivity. This review (with 99 refs.) summarizes the performance of AuNR-based electrochemical sensors based on the use of advanced nanocomposites. Following an introduction into the fields of biosensors and nanomaterials, the article summarizes the advantages and limitations of conventional analytical methods. A third section overviews the methods for preparation and characterization of AuNRs and nanocomposites including bimetallic nanorods, gold-metal oxide, gold-carbon nanotubes, gold-polymer, gold-graphene, gold-CNT and gold-enzymes conjugates. Their electrochemistry is treated next, with aspects related to the effects of rod size and shape, of thiol coatings on voltammetric signals, and on the behavior of 1-D AuNRs and respective arrays. Section 5 gives examples for non-enzymatic sensors for simple biomolecules, with subsections on sensors for hydrogen peroxide, nitric oxide, glucose, dopamine, NAD/NADH, cysteine, and some drugs. Section 6 covers enzyme-based sensors, with examples on sensors using peroxidases, oxidases and the like. The next sections cover DNA biosensors (such as for DNA biomarkers) and immunosensors, mainly for tumor markers. Possibilities for improving sensor performance are presented at the end of the review.
A method is described for the determination of the polarity of mixed organic solvents by using the fluorescent probe Hostasol Red (HR) desposited on the outer surface of nanosized zeolite L. Organic solvents and their mixtures can be roughly classified according to their polarity with bare eyes and fluorometrically. Emission peaks range from 520 to 640 nm. Some solvents act as quenchers. The method is studied with series of protic and nonprotic solvents, and with selected mixtures of organic solvents.
Graphical abstract The dye Hostalene Red adsorbed on nanosized zeolite shows strong fluorescence solvatochromism. This can be exploited to quickly assess the polarity of solvents and solvent mixtures.
Platinum nanoparticles (PtNPs) were uniformly grown on the surface of gold nanorods (AuNRs) by a laser irradiation procedure. Transmission electron microscopy confirmed that the PtNPs are uniformly grown on the surface of the AuNRs. The formation of PtNPs on the AuNRs leads to a red-shift of the absorption maximum from 734 nm to 766 nm. In addition, the efficiency of surface enhanced Raman scattering (SERS) is increased, but the photothermal conversion efficiency is decreased compared to pure AuNRs. The result indicates that electron transfer occurs between gold and platinum. The peroxidase mimicking effect of PtNPs, AuNRs and Au/Pt NRs by catalyzing the oxidation of colorless 3,3’,5,5’-tetramethylbenzidine (TMB) to blue oxidized 3,3’,5,5’-tetramethylbenzidine (oxTMB; a quinone) in the presence of H2O2. The catalytic activity of Au/Pt NRs is higher than that of sole AuNRs or PtNPs by factors of 4.2 and 2.1, respectively. Thus, Au/Pt NRs have been used for the detection of peroxide and the limit of detection is 0.04 μM. This work provides an approach to integrate the peroxidase mimicking effect with SERS enhancement for potential application in detection.
Graphical abstract A schematic diagram for the laser-induced growth of Au/Pt NRs and the colorimetric determination of hydrogen peroxide concentration with their peroxidase mimicking properties. The limit of detection is 0.04 μM based on the use of Au/Pt NRs as a catalyst.
This review (with 121 references) gives a summary on recent advances in the use of nanomaterials for the optical determination of dopamine. It includes a brief overview of the clinical significance of dopamine followed by a discussion on the recent advances in various nanomaterial-based distinctive optical spectroscopic methods such as (a) colorimetry and spectrophotometry, (b) surface-enhanced Raman spectroscopy (SERS), (c) fluorescence spectrometry, and (d) electrochemiluminescence (ECL) spectrometry. All sections are further divided into subsections based on the type of nanomaterial used, and their advantages and disadvantages are discussed. A discussion on the validity of the nanomaterial-based optical detection of dopamine for human samples is also included. This review concludes with highlights of current challenges of nanomaterial-based optical sensors and an outlook on future perspectives.
Graphical abstract Schematic of the use of various nanomaterials in the detection of dopamine based on colorimetry, spectrophotometry, surface-enhanced Raman spectroscopy, fluorescence and electrochemiluminescence.
The authors describe a semi-quantitative colorimetric method for visual detection of organophosphorus pesticides (OPs). It is based on the aspect ratio dependent absorbance of gold nanorods (AuNRs) which is due to the localized surface plasmon resonance. The aspect ratio can be tailored by the Au(III) complex formed with cetyltrimethylammonium bromide (CTAB) which is affected by acetylcholinesterase (AChE) based hydrolysis. OPs act as inhibitors of this reaction. In the absence of OPs, the product (thiocholine) of enzymatic hydrolysis consumes almost all the Au(III) species. In this case, the amount of residual Au(III)-CTAB complexes is small, and etching of the AuNRs does not occur. In the presence of OPs, however, the activity of AChE is inhibited. Hence, only small quantities of (or no) thiocholine is produced, and Au(III) is not consumed. Au(III) is capable of etching AuNRs and to change their aspect ratio. This leads to a color change from brownish to gray, cyan, green, blue, purple, red, and colorless that can be easily observed with bare eyes. The AuNRs were incorporated into cellulose paper to obtain a paper stripe for visual detection of OPs. Under optimal conditions, both methods (AuNRs in aqueous solutions and on paper) allowed various OPs to be determined. Applied to parathion, the method had a detection limit as low as 1.2 ppb and a linear range from 0.01 to 1.84 ppm. It was applied to the analysis of cabbage washing solutions and sea water samples, and acceptable accuracy and good resolution were found. In our preconception, the method represents a valuable tool for on-site detection of OPs in agriculture products and food.
Graphical abstract Schematic of a semi-quantitative method for the visual detection of organophosphate pesticides based on etching of gold nanorods. A color change from brownish to gray, green, blue, purple, red, and colorless can be observed and correlated to the concentration of pesticides.
Core-shell Au@Ag nanorods (Ag@GNRs) were synthesized and utilized to construct a voltammetric biosensor for trichloroacetic acid (TCA). The biosensor was prepared by immobilizing hemoglobin (Hb) on a glassy carbon electrode (GCE) that was modified with the Ag@GNRs. Cyclic voltammetry revealed a pair of symmetric redox peaks, indicating that direct electron transfer occurs at the Hb on the Ag@GNR-film. The electron transfer rate constant is as high as 2.32 s?1. The good electrocatalytic capability and large surface area of the Ag@GNR-film is beneficial in terms of electron transfer between Hb and the underlying electrode. The modified GCE, best operated at ?0.4 V (vs. SCE), exhibits electrocatalytic activity toward TCA in the 0.16 μM to 1.7 μM concentration range, with a 0.12 μM detection limit (at an S/N ratio of 3).
Graphical abstract Core-shell Au@Ag nanorods (Ag@GNRs) were synthesized and used to immobilize hemoglobin to construct an effective biosensor for trichloroacetic acid.
A new method is described for the determination of the pesticide λ-cyhalothrin (LC). It combines SERS detection with molecular imprinting and largely improves selectivity. A multilayer surface imprinted nanocomposite was synthesized in two steps on a nanostructure of type SiO2@rGO@Ag acting as a substrates. Firstly, the surface of the SiO2@rGO@Ag composite was modified with self-polymerized dopamine. Secondly, surface-initiated polymerization was carried out to prepare a molecularly imprinted polymer (MIP) using LC as the template. The use of this SiO2@rGO@Ag-MIP allows for excellent SERS based detection and has high selectivity for LC. The Raman intensity and LC concentration present perfect linear relationship between 10?5 to 10?9 mol L?1 and the detection limit is 3.8×10?10 mol L?1. All the procedures are conducted in aqueous or ethanol solution.
Graphical abstract Schematic of a new method for determination of the pesticide λ-cyhalothrin. It combines SERS detection with molecular imprinting and largely improves selectivity. A multilayer surface imprinted nanocomposite was synthesized in two steps on a nanostructure of type SiO2@rGO@Ag acting as a substrates.
An efficient approach is demonstrated for preparing particles consisting of a silver core and a shell of molecularly imprinted polymer (Ag@MIP). The MIP is prepared by using bisphenol A (BPA) as the template and 4-vinylpyridine as the functional monomer. The Ag@MIP fulfills a dual function in that the silver core acts as a SERS substrate, while the MIP allows for selective recognition of BPA. The Ag@MIP is characterized by scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, thermogravimetric analysis and Raman spectroscopy. The Raman intensity of Ag@MIP is higher than that of bare silver microspheres. The detection limit for BPA is as low as 10?9 mol·L?1.
Graphical abstract Schematic illustration of the preparation of silver microspheres coated with a molecularly imprinted polymer (Ag@MIPs) for detecting bisphenol A (BPA) by surface enhanced Raman scattering (SERS).
The authors have prepared a super-hydrophilic polymer consisting of a poly-polyhedral oligomeric silsesquioxane (POSS)-formaldehyde (PPF) composite. The polymerization process does not require a catalyst and results in a material with excellent hydrophilic properties and abundant functional groups. The PFF composite, even if not chemically modified, can selectively bind glycoproteins due to strong hydrophilic interactions. It is shown that glycoproteins can be selectively captured by the composite that has a binding capacity as large as 542 mg g?1 for the model protein ovalbumin. The PPF was applied to the selective capture and isolation of ovalbumin from complex biological samples.
Graphical abstract Super-hydrophilic poly-polyhedral oligomeric silsesquioxane formaldehyde (PPF) is prepared via a catalyst-free polymerization route. PPF exhibits high capturing and adsorption selectivity towards glycoproteins due to its strong hydrophilic interaction with glycan groups. Favorable capturing capacity is also achieved.
Conducting polymers possess good conductivity, can be easily modified, have a particular redox activity. Noble metal nanomaterials, in turn, possess high conductivity, catalytic properties and large surface-to-volume ratios. Synergistic materials consisting of both conducting polymer and metal nanomaterial therefore are most useful materials for use in electrochemical immunosensors with improved sensitivity and specificity. This review (with 75 references) gives an overview on advances in conducting polymer based noble metal nanomaterial hybrids for amperometric immunoassay of the 13 most common tumor markers. The review is divided into the following sections: (1) Polyaniline based noble metal nanomaterial hybrids; (2) Polyaniline derivative-based noble metal nanomaterial hybrids; (3) Polypyrrole-based noble metal nanomaterial hybrids. A final section covers future perspectives regarding challenges on the design of electrochemical immunoassays.
Graphical abstract Advances on conducting polymer and noble metal nanomaterial hybrids for amperometric immunoassay of tumor marker are reviewed. Future perspectives regarding challenges on the construction of electrochemical immunosensing interface for tumor marker are discussed.
The work describes a hybrid electrochemical sensor for highly sensitive detection of the anesthetic lidocaine (LID). Porous carbon (PC) was synthesized from an isoreticular metal-organic framework-8 (IRMOF-8) and drop cast onto a glassy carbon electrode (GCE). A layer of a molecularly imprinted polymer (MIP) layer was then fabricated in situ on the modified GCE by electro-polymerization, with LID acting as the template and resorcinol as the functional monomer. Hexacyanoferrate is used as an electrochemical probe. The electrical signal (typically acquired at 0.335 V vs. SCE) increases linearly in the 0.2 pM to 8 nM LID concentration range, with a remarkable 67 fM detection limit (at an S/N ratio of 3). The sensor is stable and selective. Eventually, rapid and accurate detection of LID in spiked real samples was successfully realized.
The review (with 95 refs.) starts with an introduction that addresses the need for magnetic actuation in microfluidics. A second section describes the equations governing magnetic micromixing, with subsections on magnetic equations, fluid flow equations, and on convection–diffusion equations. The next section specifically covers magnetically actuated micromixers, with subsections on those actuated by external permanent magnets, by electromagnets, by microstirrers, and on micromixers with integrated electrodes. The conclusion summarizes the state of the art and addresses current challenges and trends.
Graphical abstract In this review, micromixers are classified into four types according to drive mode including external permanent magnet, electromagnet, microstirrer and the integrated electrode. The basic governing equations and operating rules of magnetic micromixers are given. The review is supposed to provide a helpful reference for those intending to study this field.
The authors describe a nonenzymatic glucose sensor that was obtained by electrochemical deposition and oxidization of metallic nickel on the surface of nitrogen-doped reduced graphene oxide (N-RGO) placed on a glassy carbon electrode (GCE). An analysis of the morphology and chemical structure indicated the composite to possess a well-defined vermicular Ni(OH)2 nanorods combined with N-RGO. The electrochemical performance of the modified GCE with respect to the detection of glucose in 0.1 M NaOH was investigated by cyclic voltammetry and amperometry. The wrinkle and protuberance of N-RGO for loading of nanostructured Ni(OH)2 are found to increase electrical conductivity, surface area, electrocatalytical activity and stability. The modified GCE displays a high electrocatalytic activity towards the oxidation of glucose in 0.1 M NaOH solution. The lower detection limit is 0.12 μM at an applied potential of +0.45 V (vs Ag/AgCl) (S/N=3), and the sensitivity is 3214 μA mM?1 cm?2. The modified GCE possesses long-term stability, good reproducibility and high selectivity over fructose, sucrose and lactose.
Graphical abstract The composite of vermicular Ni(OH)2 nanorods combined with N-doped reduced graphene oxide is a viable catalyst for non-enzymatic electrochemical sensing of glucose.
CdSe:Eu nanocrystals were successfully synthesized and characterized by transmission electron microscopy, X-ray powder diffraction, and X-ray photoelectric spectroscopy. The CdSe:Eu nanocrystals showed enhanced green electrochemiluminescence (ECL) intensity when compared to pure CdSe nanocrystals. Further, the nanocrystals were used to design an ECL immunosensor for the detection of carcinoembryonic antigen (CEA) that has a linear response over the 1.0 fg·mL?1 to 100 ng·mL?1 CEA concentration range with a 0.4 fg·mL?1 detection limit. The assay was applied to the determination of CEA in human serum samples.
Graphical abstract Schematic of the assay: GCE-glassy-carbon electrode, Ab- Antibody, BSA- Bovine serum albumin, Ag- Antigen. CdSe:Eu nanocrystals were used to design an ECL immunosensor for the detection of carcinoembryonic antigen.
The paper reports on a method for the detection of nanocellulose (NC) in consumer products by making use of a combination of (a) liquid-liquid extraction with an ionic liquid, and (b) size characterization by asymmetric flow field-flow fractionation (AF4) coupled to multi-angle light scattering (MALS) and refractive index (RI) detection. Both AF4 and MALS are viable tools for characterizing the size of the nanofibers. Sample preparation is easy, and the extraction efficiency of the method is 80.9 ± 1.8% (n = 5). It was applied to the detection of NC in toothpaste and coconut foodstuff to verify the practicability of the method.
Graphical abstract Nanocellulose (NC) monitoring from coconut products and toothpaste and its size characterization by liquid-liquid extraction and asymmetric flow field-flow fractionation equipped with multi-angle light scattering and refractive index detection (AF4-MALS-RI).
The authors report on a new approach for the determination of the breast cancer biomarker microRNA-155 (miRNA-155). It is based on the measurement of the fluorescence shift of oligonucleotide-templated copper nanoclusters (DNA-CuNC). A probe DNA was designed that acts as a template for the preparation of CuNC which, under 400 nm excitation, exhibit strong fluorescence enhancement at 490 nm and a 90 nm Stokes shift after binding to target miRNA-155 and formation of a DNA-RNA heteroduplex. Under the optimal conditions, the fluorescence of the DNA-CuNC increases with increasing concentration of miRNA-155 in the range from 50 pM to 10 nM, with a 11 pM detection limit. The assay has excellent selectivity over noncomplementary RNA. The method was applied to the determination of miRNA-155 in the presence of human plasma and saliva.
Graphical abstract Schematic of the detection strategy that relies on the fluorescence shift of DNA-CuNCs resulting from the specific binding of DNA-CuNCs with target miRNA-155. Fluorescence intensities are linearly proportional to the concentrations of target RNA from 50 pM to 10 nM.
Three-dimensional structures comprising polypyrrole nanowires (PPyNWs) and molecularly imprinted polymer (MIP) were prepared by electropolymerization on the surfaces of a glassy carbon electrode (GCE). The modified GCE possesses both large surface area and good electrocatalytic activity for oxidizing dopamine (DA), and this leads to high sensitivity. The electropolymerized MIP has a large number of accessible surface imprints, and this makes the GCE more selective. Under optimal conditions and at a working voltage of typically 0.23 V (vs. SCE), the calibration plot is linear in the 50 nM to 100 μM DA concentration range, and the limit of detection is 33 nM. The sensor has been successfully applied to the analysis of DA in injections.
Graphical abstract Schematic of a three-dimensional nanocomposite based dopamine sensing platform based on the use of a molecularly imprinted polymer and poly(pyrrole) nanowires. The modified polypyrrole nanowires and molecularly imprinted polymer endowed high electrocatalytic capacity and good selectivity for dopamine recognition, respectively.
Carbon polymer dots (CPDs) were prepared by a one-pot aqueous synthetic route from ascorbic acid and diethylenetriamine at room-temperature. The CPDs under 350-nm excitation exhibit blue fluorescence peaking at 430 nm with a quantum yield of 47%. Other features include an average diameter of 5 nm, a fluorescence that is independent of the excitation wavelength, good water dispersibility and photostability, and excellent biocompatibility. The CPDs are shown to be viable fluorescent probes for ferric ion which acts as a strong quencher. The response to Fe(III) is linear in the 0.2 to 10 μM concentration range, and the detection limit is 0.1 μM. The probe was applied to the determination of Fe(III) in environmental waters and to intracellular imaging of ferric ions in HeLa cells.
Graphical abstract Carbon polymer dots (CPDs) are prepared from ascorbic acid and diethylenetriamine (DETA) at room-temperature (RT). The RT-CPDs exhibit excellent optical performance, biocompatibility and selectivity of quenching by ferric ions. This can be applied for determination and intracellular imaging of ferric ion.
This paper describes a CdTe quantum dot-based fluorescence resonance energy transfer (FRET) based assay for the detection of the breast cancer biomarker microRNA. The method relies on energy transfer between DNA-templated silver nanoclusters (AgNCs) and CdTe QDs. Interaction between double strand oligonucleotide and QDs can be detected qualitatively through gel analysis and quantitatively by the signal amplification from AgNCs to QDs via FRET, best measured at an excitation wavelength of 350 nm and at emission wavelengths of 550 and 590 nm. Three microRNAs (microRNA-21, microRNA-155 and Let-7a) were quantified to verify the feasibility of the method, and a high sensitivity for microRNAs was achieved. Fluorescence intensity increases linearly with the log of the concentration of microRNA 155 in the 5.0 pM to 50 nM range, with a 1.2 pM detection limit.
Graphical abstract Schematic presentation of a quantum dot-based (QD-based) fluorescence resonance energy transfer technique for the detection of microRNA (miRNA). The method relies on energy transfer between DNA-templated silver nanoclusters (AgNCs) and QDs.
A metal-organic framework (MOF) was designed and prepared from luminescent Tb(III), adenosine diphosphate (ADP) and bipyridyl (Bipy). Its green fluorescence at 545 nm is shown to enable the fluorometric detection of cyanide ion based on the principle of π-conjugation-induced fluorescence enhancement. The fluorescence of the probe is strongly increased by cyanide due to extended π-conjugation between probe MOF and cyanide which sensitizes the fluorescence of Tb(III). This effect can be used to quantify cyanide at levels as low as 30 nM in aqueous solution. The method was applied to the determination of cyanide in saliva samples. The lack of interference by acetate and fluoride is a specific feature of this method. The method based on the principle of π-conjugation-induced fluorescence enhancement provides a new sensing way for widely used fluorescence assays.
Graphical abstract A cyanide-selective Tb-ADP-Bipy MOF was designed and synthesized for the detection of cyanide based on the principle of π-conjugation-induced fluorescence enhancement.
