Ultrafast Single-Scan 2D NMR Spectroscopic Detection of a PHIP-Hyperpolarized Protease Inhibitor

Two-dimensional NMR spectroscopy is one of the most important spectroscopic tools for the investigation of biological macromolecules. However, due to the low sensitivity of NMR spectroscopy, it takes usually from several minutes to many hours to record such spectra. Here, the possibility of detecting a bioactive derivative of the sunflower trypsin inhibitor-1 (SFTI-1), a tetradecapeptide, by combining parahydrogen-induced polarization (PHIP) and ultrafast 2D NMR spectroscopy is shown. The PHIP activity of the inhibitor was achieved by labeling with O-propargyl-l -tyrosine. In 1D PHIP experiments a signal enhancement of a factor of approximately 1200 compared to standard NMR was found. This enhancement permits measurement of 2D NMR correlation spectra of low-concentrated SFTI-1 in less than 10 seconds, employing ultrafast single-scan 2D NMR detection. As experimental examples PHIP-assisted ultrafast single-scan TOCSY spectra of SFTI-1 are shown.     

Lithium intercalation into disordered carbon/SiCN composite. Part 2: Raman spectroscopy and <Superscript>7</Superscript>Li MAS NMR investigation of lithium storage sites

Within this work, we analyze the lithium storage sites within carbon/silicon carbonitride (SiCN) composites. Commercial carbons, HD3 (hard carbon) and LD1N and LD2N (soft carbons), of varying porosity are impregnated with polysilazane (HTT 1800) and pyrolysed at 1100 °C. It is found in the first part of this study (Graczyk-Zajac et al. J Solid State Electrochem 19:2763–2769, 2015) that the initial porosity of the carbon phase plays an important role in determining the lithium insertion capacity and rate capability of the composite material. By applying Raman spectroscopy and solid-state ⁷Li MAS NMR on pristine, lithiated, and delithiated samples, we investigate the lithium storage sites within the composite materials. By means of Raman spectroscopy, it has been found that lithium storage in hard carbon-derived composites occurs in a significant extent via adsorption-like process within unorganized carbon, whereas for the soft carbon composites, storage in turbostratic carbon is identified. ⁷Li solid-state NMR confirms these findings revealing that more than 33 % of lithium stored in HD3/SiCN is adsorbed in ionic form at the surface and in pores of the composite, while around 38 % is stored between carbon layers. LD1N and LD2N composites store more than 50 % of lithium in the intercalation-type sites.     

Bayesian inference using a noninformative prior for linear Gaussian random coefficient regression with inhomogeneous within-class variances

A Bayesian inference for a linear Gaussian random coefficient regression model with inhomogeneous within-class variances is presented. The model is motivated by an application in metrology, but it may well find interest in other fields. We consider the selection of a noninformative prior for the Bayesian inference to address applications where the available prior knowledge is either vague or shall be ignored. The noninformative prior is derived by applying the Berger and Bernardo reference prior principle with the means of the random coefficients forming the parameters of interest. We show that the resulting posterior is proper and specify conditions for the existence of first and second moments of the marginal posterior. Simulation results are presented which suggest good frequentist properties of the proposed inference. The calibration of sonic nozzle data is considered as an application from metrology. The proposed inference is applied to these data and the results are compared to those obtained by alternative approaches.     

Arene Ruthenium(II) Complexes Bearing the κ-P or κ-P,κ-S Ph2P(CH2)3SPh Ligand

Neutral [Ru(η⁶-arene)Cl₂{Ph₂P(CH₂)₃SPh-κP}] (arene = benzene, indane, 1,2,3,4-tetrahydronaphthalene: 2a, 2c and 2d) and cationic [Ru(η⁶-arene)Cl(Ph₂P(CH₂)₃SPh-κP,κS)]X complexes (arene = mesitylene, 1,4-dihydronaphthalene; X = Cl: 3b, 3e; arene = benzene, mesitylene, indane, 1,2,3,4-tetrahydronaphthalene, and 1,4-dihydronaphthalene; X = PF₆: 4a–4e) complexes were prepared and characterized by elemental analysis, IR, ¹H, ¹³C and ³¹P NMR spectroscopy and also by single-crystal X-ray diffraction analyses. The stability of the complexes has been investigated in DMSO. Complexes have been assessed for their cytotoxic activity against 518A2, 8505C, A253, MCF-7 and SW480 cell lines. Generally, complexes exhibited activity in the lower micromolar range; moreover, they are found to be more active than cisplatin. For the most active ruthenium(II) complex, 4b, bearing mesitylene as ligand, the mechanism of action against 8505C cisplatin resistant cell line was determined. Complex 4b induced apoptosis accompanied by caspase activation.     

Insights into LiAlH4 Catalyzed Imine Hydrogenation

Commercial LiAlH₄ can be used in catalytic quantities in the hydrogenation of imines to amines with H₂. Combined experimental and theoretical investigations give deeper insight in the mechanism and identifies the most likely catalytic cycle. Activity is lost when Li in LiAlH₄ is exchanged for Na or K. Exchanging Al for B or Ga also led to dramatically reduced activities. This indicates a heterobimetallic mechanism in which cooperation between Li and Al is crucial. Potential intermediates on the catalytic pathway have been isolated from reactions of MAlH₄ (M=Li, Na, K) and different imines. Depending on the imine, double, triple or quadruple imine insertion has been observed. Prolonged reaction of LiAlH₄ with PhC(H)=NtBu led to a side-reaction and gave the double insertion product LiAlH₂[N]₂ ([N]=N(tBu)CH₂Ph) which at higher temperature reacts further by ortho-metallation of the Ph ring. A DFT study led to a number of conclusions. The most likely catalyst for hydrogenation of PhC(H)=NtBu with LiAlH₄ is LiAlH₂[N]₂. Insertion of a third imine via a heterobimetallic transition state has a barrier of +23.2 kcal mol⁻¹ (ΔH). The rate-determining step is hydrogenolysis of LiAlH[N]₃ with H₂ with a barrier of +29.2 kcal mol⁻¹. In agreement with experiment, replacing Li for Na (or K) and Al for B (or Ga) led to higher calculated barriers. Also, the AlH₄⁻ anion showed very high barriers. Calculations support the experimentally observed effects of the imine substituents at C and N: the lowest barriers are calculated for imines with aryl-substituents at C and alkyl-substituents at N.     

Switching the Mechanism of NADH Photooxidation by Supramolecular Interactions

A series of three Ru(II) polypyridine complexes was investigated for the selective photocatalytic oxidation of NAD(P)H to NAD(P)⁺ in water. A combination of (time-resolved) spectroscopic studies and photocatalysis experiments revealed that ligand design can be used to control the mechanism of the photooxidation: For prototypical Ru(II) complexes a ¹O₂ pathway was found. Rudppz ([(tbbpy)₂Ru(dppz)]Cl₂, tbbpy=4,4'-di-tert-butyl-2,2'-bipyridine, dppz=dipyrido[3,2-a:2′,3′-c]phenazine), instead, initiated the cofactor oxidation by electron transfer from NAD(P)H enabled by supramolecular binding between substrate and catalyst. Expulsion of the photoproduct NAD(P)⁺ from the supramolecular binding site in Rudppz allowed very efficient turnover. Therefore, Rudppz permits repetitive selective assembly and oxidative conversion of reduced naturally occurring nicotinamides by recognizing the redox state of the cofactor under formation of H₂O₂ as additional product. This photocatalytic process can fuel discontinuous photobiocatalysis.     

Characterization of Functional Groups in Estuarine Dissolved Organic Matter by DNP-enhanced 15N and 13C Solid-State NMR

Estuaries are key ecosystems with unique biodiversity and are of high economic importance. Along the estuaries, variations in environmental parameters, such as salinity and light penetration, can modify the characteristics of dissolved organic matter (DOM). Nevertheless, there is still limited information about the atomic-level transformations of DOM in this ecosystem. Solid-state NMR spectroscopy provides unique insights into the nature of functional groups in DOM. A major limitation of this technique is its lack of sensivity, which results in experimental time of tens of hours for the acquisition of ¹³C NMR spectra and generally precludes the observation of ¹⁵N nuclei for DOM. We show here how the sensitivity of solid-state NMR experiments on DOM of Seine estuary can be enhanced using dynamic nuclear polarization (DNP) under magic-angle spinning. This technique allows the acquisition of ¹³C NMR spectra of these samples in few minutes, instead of hours for conventional solid-state NMR. Both conventional and DNP-enhanced ¹³C NMR spectra indicate that the ¹³C local environments in DOM are not strongly modified along the Seine estuary. Furthermore, the sensitivity gain provided by the DNP allows the detection of ¹⁵N NMR signal of DOM, in spite of the low nitrogen content. These spectra reveal that the majority of nitrogen is in the amide form in these DOM samples and show an increased disorder around these amide groups near the mouth of the Seine.     

Fast Photoresponse and Long Lifetime UV Photodetectors and Field Emitters Based on ZnO/Ultrananocrystalline Diamond Films

We have designed photodetectors and UV field emitters based on a combination of ZnO nanowires/nanorods (ZNRs) and bilayer diamond films in a metal–semiconductor–metal (MSM) structure. The ZNRs were fabricated on different diamond films and systematic investigations showed an ultra‐high photoconductive response from ZNRs prepared on ultrananocrystalline diamond (UNCD) operating at a lower voltage of 2 V. We found that the ZNRs/UNCD photodetector (PD) has improved field emission properties and a reduced turn‐on field of 2.9 V μm^?1 with the highest electron field emission (EFE) by simply illuminating the sample with ultraviolet (UV) light. The photoresponse (I_photo/I_dark) behavior of the ZNRs/UNCD PD exhibits a much higher photoresponse (912) than bare ZNRs (229), ZNRs/nanocrystalline diamond (NCD; 518), and ZNRs/microcrystalline diamond (MCD; 325) under illumination at λ=365 nm. A photodetector with UNCD films offers superior stability and a longer lifetime compared with carbon materials and bare ZNRs. The lifetime stability of the ZNRs/UNCD‐based device is about 410 min, which is markedly superior to devices that use bare ZNRs (92 min). The ZNRs/UNCD PD possesses excellent photoresponse properties with improved lifetime and stability; in addition, ZNRs/UNCD‐based UV emitters have great potential for applications such as cathodes in flat‐panel displays and microplasma display devices.