Estimation of growth rate in unidirectionally solidified multicrystalline silicon by the growth-induced striation method

Multicrystalline silicon was grown by unidirectional solidification method using the accelerated crucible rotation technique. The application of the accelerated crucible rotation technique in unidirectional solidification method induced growth striations across the axial direction of the grown crystal. This striation pattern was observed from carbon concentration distribution, obtained by using Fourier transform infrared spectroscopy. The generated striation pattern was found to be weak and discontinuous. Some striations were absent, probably due to back melting, caused during each crucible rotation. From the growth striations and applied time period in crucible rotation, the growth rate was estimated by using Fourier transformation analysis.     

Degree-regular triangulations of torus and Klein bottle

A triangulation of a connected closed surface is called weakly regular if the action of its automorphism group on its vertices is transitive. A triangulation of a connected closed surface is called degree-regular if each of its vertices have the same degree. Clearly, a weakly regular triangulation is degree-regular. In [8], Lutz has classified all the weakly regular triangulations on at most 15 vertices. In [5], Datta and Nilakantan have classified all the degree-regular triangulations of closed surfaces on at most 11 vertices. In this article, we have proved that any degree-regular triangulation of the torus is weakly regular. We have shown that there exists ann-vertex degree-regular triangulation of the Klein bottle if and only if n is a composite number ≥ 9. We have constructed two distinctn-vertex weakly regular triangulations of the torus for eachn ≥ 12 and a (4m + 2)-vertex weakly regular triangulation of the Klein bottle for eachm ≥ 2. For 12 ≤n ≤ 15, we have classified all then-vertex degree-regular triangulations of the torus and the Klein bottle. There are exactly 19 such triangulations, 12 of which are triangulations of the torus and remaining 7 are triangulations of the Klein bottle. Among the last 7, only one is weakly regular.     

Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

Dielectric properties of KDP-type ferroelectric crystals in the presence of external electric field

Considering external electric field as well as third- and fourth-order phonon anharmonic interaction terms in the pseudospin-lattice coupled mode (PLCM) model Hamiltonian for KDP-type ferroelectrics, expressions for field-dependent shift, width, renormalized soft mode frequency, Curie temperature, dielectric constant and dielectric loss are evaluated. For the calculation, method of statistical double-time temperature-dependent Green’s function has been used. By fitting model values of physical quantities, temperature and electric field dependences of soft mode frequency, dielectric constant and loss have been calculated which compare well with experimental results of Baumgartner [8] and Choi and Lockwood [9]. Both dielectric constant and loss decrease with electric field.     

Evaluation of the drag force by integrating the energy dissipation rate in stokes flow for 2D domains using the FEM

The total drag force on the surface of a body, which is the sum of the form drag and the skin friction drag in a 2D domain, is numerically evaluated by integrating the energy dissipation rate in the whole domain for an incompressible Stokes fluid. The finite element method is used to calculate both the energy dissipation rate in the whole domain as well as the drag on the boundary of the body. The evaluation of the drag and the energy dissipation rate are post-processing operations which are carried out after the velocity field and the pressure field for the flow over a particular profile have been obtained. The results obtained for the flow over three different but constant area profiles—a circle, an ellipse and a cross-section of a prolate spheroid—with uniform inlet velocity are presented and it is shown that the total drag force times the velocity is equal to the total energy dissipation rate in the entire finite flow domain. Hence, by calculating the energy dissipation rate in the domain with unit velocity specified at the far-field boundary enclosing the domain, the drag force on the boundary of the body can be obtained.     

Pollution-error in the h-version of the finite-element method and the local quality of a-posteriori error estimators

In this paper we study the pollution-error in the h-version of the finite element method and its effect on the local quality of a-posteriori error estimators. We show that the pollution-effect in an interior subdomain depends on the relationship between the mesh inside and outside the subdomain and the smoothness of the exact solution. We also demonstrate that it is possible to guarantee the quality of local error estimators in any mesh-patch in the interior of a finite-element mesh by employing meshes which are sufficiently refined outside the patch.     

Why chaos is rarely observed in natural populations

An attempt has been made to understand why chaotic dynamics have received poor evidential support from field studies. Our study opens up the possibility that the cause of failure might not be poor quality of data, as pointed out by earlier authors, but an ecological reality. We have designed two model food chains to examine whether there is a biological basis for the crisis. This investigation is effected with the help of a new method which we introduce at an appropriate place in the text. The fact that chaos exists in a narrow range of parametric values in both the model systems suggests that the crisis indeed has a biological origin.     

Thin layer chromatographic studies of anils II. Separation,identification and determination

Thin layer chromatographic behaviour of ten anils was studied on silica gel adsorbent mixed with starch binder with ten solvent systems. Simultaneous separation, identification and determination of ternary mixtures of isomers was stressed. TheR _F increasing order was found to be dependent on the solvent and independent of the degree of saturation of the chamber. The correlations ofR _F with _max and (C=O) of isomers were established and used in their identification. Six anils were separated in methanol—benzene (11).     

Stereospecific approach to α,β-disubstituted nitroalkenes via coupling of α-bromonitroalkenes with boronic acids and terminal acetylenes

(Z)-α-Bromo-β-substituted nitroethylenes undergo facile Suzuki coupling with aryl, heteroaryl, and vinylboronic acids in the presence of Pd(PPh₃)₄ as catalyst to afford (E)-α,β-disubstituted nitroethylenes in high yield (up to 95%) and complete specificity. Similar coupling of α-bromonitroethylenes with terminal acetylenes (Sonogashira coupling) provides a novel route to (E)-nitroenynes. These Pd-catalyzed coupling methods offer a convenient and stereospecific entry into a diverse array of synthetically and biologically useful α,β-disubstituted nitroethylenes.     

Kinetics and mechanism of the ruthenium(III)-catalyzed oxidation of hydroxy-acids byN-bromosuccinimide

Summary The kinetics of the Ru^III-catalyzed oxidation of the hydroxy acids; lactic, tartaric, malic and citric acids byN-bromosuccinimide in HClO₄ and in the presence of Hg(OAc)₂ have been studied. The reactions exhibit a first order rate dependence with respect to the oxidant and zeroth order rate dependence with respect to substrate. The rate is retarded by [H⁺], accelerated at law Ru^III concentrations but independent of [Ru^III] at higher Ru^III concentrations. A mechanism consistent with the observed kinetic data is proposed.