Continuous fermentation of d-xylose by immobilizedpichia stipitis comparison between cstr and cpfr

Applied Biochemistry and Biotechnology - The main purpose of this work was to compare the performance of two different kinds of reactors (CSTR and CPFR) in order to enhance the ethanol productivity...     

Determination of boric acid in high nickel content solutions by neutron absorption method

Determination of boric acid in high nickel content solutions during nickel cathode production was made by measuring the transmission loss of thermal neutrons. According to industrial requirements, adequate accuracy and reproducibility were obtained.     

Development and optimization of a solid composite tyrosinase biosensor for phenol detection in flow injection systems

Bulk-modified epoxy-graphite tyrosinase biosensors were fabricated by four different procedures. The influence of these fabrication procedures on the analytical performance of the enzyme electrode in an amperometric wall-jet flow cell has been studied. The bioprobe performance is assessed by cyclic voltammetry. Higher current densities and narrower peaks were obtained when the enzyme was introduced in the dry state into the epoxy-graphite material, instead of introducing it previously dissolved in the buffer. In the F1 system responses of 11.79 μA cm⁻² and 1.43 μA cm⁻² are then obtained for catechol and phenol respectively for 50 μL injections of 20 μM solutions. Moreover, if gold/palladium is introduced into the epoxy-graphite, a further increase in current is achieved resulting in 27.70μA cm⁻² and 4.90μA cm⁻²for catechol and phenol, respectively. This biosensor can operate in aqueous as well as in mixed aqueous-organic environments.     

The extraction of mercury(II), silver(I), cobalt(II) and cadmium(II) by dioctylarsinic acid in chloroform

Dioctylarsinic acid (HDOAA) in chloroform solution has been investigated as a reagent for the extraction of Hg(II), Ag(I), Co(II), and Cd(II). Silver, cobalt and cadmium are not extracted below pH 7. An extraction coefficient of 1.1, constant over the pH range 1–6.5, was observed for Hg(II). With HCl concentrations of 1–8 M the extractability of mercury decreased slowly, reaching E_a⁰ = 0.05 at 8 M HCl. Silver formed a silver dioctylarsinate precipitate which collected at the interface. The extraction coefficients for Hg(II), Co(II) and Cd(II) increased above pH 7 to values of 20 (pH 9.1), 30 (pH 8.0), and 23 (pH 10), respectively. Reagent- and pH-dependence studies indicated that Co(II) and Cd(II) are extracted as M(DOAA)₂ or M(DOAA)Cl through interaction of HDOAA with M(OH)₂ or M(OH)⁺. Mercury was extracted from solutions of pH 1–6.5 as HgCl₂ (HDOAA)_2.5.     

Homogeneous pyrolysis kinetics of ethyl 3-hydroxy-3-methylbutanoate in the gas phase

The pyrolysis kinetics of ethyl 3-hydroxy-3-methylbutanoate have been examined over the temperature range of 286–330°C and pressure range of 29–108 Torr. In a seasoned vessel and in the presence of the free radical inhibitor cyclohexene or toluene the reaction is homogeneous, unimolecular and obeys a first-order rate law. The elimination products are mainly acetone and ethyl acetate, and very small amounts of ethyl 3-butenoate, acetic acid, ethylene and H₂O. The rate coefficient is expressed by the following equation: log k₁(s^–1)=(12.39±0.46)–(174.5±5.2) kJ mol^–1 (2.303RT)^–1. The mechanism appears to proceed via a six-membered cyclic transition state, where polarization of the (CH₃)C(OH)^+...-CH₂COOCH₂CH₃ bond is rate determining.     

Beryllium(II) complexes of the Kläui tripodal ligand cyclopentadienyltris(diethylphosphito-p)cobaltate(-)

The interactions of the beryllium(II) ion with the cyclopentadienyltris(diethylphosphito-P)cobaltate monoanion, L(-), have been investigated, in aqueous solution, by synthetic methods, potentiometry, ESMS, and (1)H, (31)P, and (9)Be NMR spectroscopy. L(-) has been found able to displace either two or three water molecules in the beryllium(II) coordination sphere, to form mononuclear, dinuclear, and trinuclear derivatives, in which the metal ion is pseudotetrahedrally coordinated. The species [BeL(H(2)O)](+) and [Be(2)L(2)(mu-OH)](+) have been identified in solution while complexes of formula BeL(2) and [Be(3)L(4)](ClO(4))(2) have been isolated as solid materials. The species [BeL(OPPh(2))](+), closely related to [BeL(H(2)O)](+), has been characterized in acetone solution and isolated as tetraphenylborate salt. The structure of the unusual trimeric complex [Be(3)L(4)](2+) has been elucidated by an unprecedented 2D (9)Be-(31)P NMR correlation spectrum showing the presence of a single central beryllium nucleus and two equivalent terminal beryllium nuclei. The three beryllium centers are held together by four cobaltate ligands, which display two different bonding modes: two ligands are terminally linked with all the three oxygen donors to one terminal beryllium, and the other two bridge two metal centers, sharing the oxygen donors between central and terminal beryllium atoms.