Impact of FRET between Molecular Aggregates and Quantum Dots

Energy transfer has been employed in third‐generation solar cells for the conversion of light into electrical energy. Long‐range nonradiative energy transfer from semiconductor quantum dots (QDs) to fluorophores has been demonstrated by using CdS QDs and thiophene?BODIPY (boron dipyrromethene, abbreviated as TG2). TG2 shows a broad photoluminescence (PL) spectrum, which varies with concentration. At very low concentrations, monomeric units are present; then, upon increasing the concentration, these monomers form a mixed (J‐/H‐)aggregated state. Energy transfer between the CdS QDs and TG2 was confirmed by separately investigating the interactions between CdS and the monomer of TG2 and between CdS and the aggregated states of TG2. Size‐dependent PL quenching confirmed that nonradiative Förster resonance energy transfer (FRET) from photoexcited CdS QDs to the J‐aggregate state of TG2 was the major energy‐relaxation channel, which occurred on the timescale of hundreds of fs. These results have broad applications in the field of light harvesting based on the assembly of molecular aggregates.     

Unprecedented Diastereoselective Arylogous Michael Addition of Unactivated Phthalides

The first highly enantioselective arylogous Michael reaction (AMR) of 3-unsubstituted phthalides has been described. This phase-transfer methodology, which uses catalytic amounts of KOH/18-crown-6 catalyst in mesitylene in the presence of N,O-bis(trimethylsilyl)acetamide (BSA), gives access to a broad range of 3-monosubstituted phthalides with high levels of syn diastereoselectivity and good yields, starting from 3-unsubstituted derivatives and diverse α,β-unsaturated carbonyl compounds. The reaction also applies to unactivated 3-alkyl phthalides to afford 3,3-dialkyl derivatives. A plausible mechanism has been suggested. DFT analysis of possible transition states gives a rationale of the high syn diastereoselectivity observed and its correlation with the solvent's dielectric constant.     

Contrasting Effect of Additives on Photoinduced Reactions of SmI2

The work described herein compares the effect of additives (HMPA, methanol, ethylene glycol, pinacol, N-methylethanolamine) on thermal and photochemical reactions of samarium diiodide (SmI₂). In thermal reactions, additives that coordinate to SmI₂ induce a significant increase in reaction rate. In photochemical reactions, the presence of an electronegative atom with a highly localized negative charge on the substrate leads to a rate deceleration. In order to benefit from the columbic interaction with the positively charged samarium cation, these substrates react preferentially by an inner sphere reduction mechanism. The addition of ligands prevents this close interaction causing rate retardation. Furthermore, studies demonstrate that excited state quenching of Sm^II by ethylene glycol and other additives indicate that it is unlikely to be the major cause for the observed rate retardation. This effect provides a simple diagnostic tool to distinguish between an inner and an outer sphere reduction mechanism.     

An Ultra-Microporous Metal–Organic Framework with Exceptional Xe Capacity

Molecular confinement plays a significant effect on trapped gas and solvent molecules. A fundamental understanding of gas adsorption within the porous confinement provides information necessary to design a material with improved selectivity. In this regard, metal–organic framework (MOF) adsorbents are ideal candidate materials to study confinement effects for weakly interacting gas molecules, such as noble gases. Among the noble gases, xenon (Xe) has practical applications in the medical, automotive and aerospace industries. In this Communication, we report an ultra-microporous nickel-isonicotinate MOF with exceptional Xe uptake and selectivity compared to all benchmark MOF and porous organic cage materials. The selectivity arises because of the near perfect fit of the atomic Xe inside the porous confinement. Notably, at low partial pressure, the Ni–MOF interacts very strongly with Xe compared to the closely related Krypton gas (Kr) and more polarizable CO₂. Further ¹²⁹Xe NMR suggests a broad isotropic chemical shift due to the reduced motion as a result of confinement.     

Unveiling the binding interaction of zinc (II) complexes of homologous Schiff-base ligands on the surface of BSA protein: A combined experimental and theoretical approach

Four new zinc (II) complexes [Zn (HL¹H)Br₂] (1), [Zn (HL¹H)Cl₂] (2), [Zn₂(HL²)Br₃] (3), and [Zn (HL²)Cl] (4) have been synthesized by adopting template synthetic strategy and utilizing two homologous Schiff base ligands (H₂L¹ = 4-bromo-2-{[2-(2-hydroxyethylamino)-ethylimino]-methyl}-6-methoxyphenol, H₂L² = 4-bromo-2-{[3-(2-hydroxyethylamino)propylimino]methyl}-6-methoxyphenol), differing in one -CH₂- unit in the ligating backbone, by adopting template synthetic strategy. All the complexes have been characterized by single crystal X-ray diffraction analysis as well as by other routine physicochemical techniques. Ligand mediated structural variations have been observed and rationalized by density functional theoretical (DFT) calculations. Interaction of the complexes 1–4 with Bovine Serum Albumin protein (BSA) has been studied by different spectroscopic techniques. A complete thermodynamic profile (ΔH^o, ΔS^o and ΔG^o) was evaluated initially from the change in absorption and fluorescence spectra upon addition of BSA to the complexes. Appreciable binding constant values in the range ~ 0.94–4.51 × 10⁴ M⁻¹ indicate efficient binding tendency of the complexes to BSA with the sequence 1 ≅ 2 > 3 ≅ 4. Circular dichroism (CD), isothermal calorimetric titration experiments, molecular docking and molecular dynamics have been performed to gain deep insight into the binding regions of complex 1 to BSA. Experimental evidences suggest an interaction of zinc complexes at the surface of BSA protein and this particular binding has been exploited to determine unknown concentration of BSA protein. For this purpose complex 1 was explored as a BSA protein quantification tool.     

Isolation and characterization of 4-chlorophenol degrading bacterial strain from pharmaceutical xenobiotic compounds contaminated soil using enrichment technique

4- chlorophenol is available as the fundamental basic compound of numerous manufactured organics. It is produced from various sources like herbicides, wood additives, oil industries, pharmaceutical drugs and so on. It can be removed from the effluent by various ways but most effective method is bioremediation. In present study, aerobic bacterial strain was isolated from soil that was contaminated with pharmaceutical xenobiotic compounds using enrichment technique with 500 ppm of 4-chlorophenol as a sole source of carbon and energy. Colonies were isolated after 24 h of incubation on petri plate by media enrichment with 500 ppm of 4- chlorophenol and serial dilution method. 18 colonies were isolated and examined for their ability to degrade 500 ppm of 4-chlorophenol. The most potent strain, C17 was able to remove nearly ～99.93% of 4-chlorophenol in 24 h, 37 °C temperature and 6.8 pH. Based on morphological, biochemical, nucleotide homology and phylogenetic analysis the strain was found to have maximum similarity (98.98%) with Bacillus timonensis strain 10403023.     

Redefining the transparency order

In this paper, we consider the multi-bit Differential Power Analysis (DPA) in the Hamming weight model. In this regard, we revisit the definition of Transparency Order (\(\mathsf {TO}\)) from the work of Prouff (FSE 2005) and find that the definition has certain limitations. Although this work has been quite well referred in the literature, surprisingly, these limitations remained unexplored for almost a decade. We analyse the definition from scratch, modify it and finally provide a definition with better insight that can theoretically capture DPA in Hamming weight model for hardware implementation with precharge logic. At the end, we confront the notion of (revised) transparency order with attack simulations in order to study to what extent the low transparency order of an s-box impacts the efficiency of a side channel attack against its processing. To the best of our knowledge, this is the first time that such a critical analysis is conducted (even considering the original notion of Prouff). It practically confirms that the transparency order is indeed related to the resistance of the s-box against side-channel attacks, but it also shows that it is not sufficient alone to directly achieve a satisfying level of security. Regarding this point, our conclusion is that the (revised) transparency order is a valuable criterion to consider when designing a cryptographic algorithm, and even if it does not preclude to also use classical countermeasures like masking or shuffling, it enables to improve their effectiveness.     

A General Strategy Toward pH-Resistant Phenolic Fluorophores for High-Fidelity Sensing and Bioimaging Applications

Aryl alcohol-type or phenolic fluorophores offer diverse opportunities for developing bioimaging agents and fluorescence probes. Due to the inherently acidic hydroxyl functionality, phenolic fluorophores provide pH-dependent emission signals. Therefore, except for developing pH probes, the pH-dependent nature of phenolic fluorophores should be considered in bioimaging applications but has been neglected. Here we show that a simple structural remedy converts conventional phenolic fluorophores into pH-resistant derivatives, which also offer “medium-resistant” emission properties. The structural modification involves a single-step introduction of a hydrogen-bonding acceptor such as morpholine nearby the phenolic hydroxyl group, which also leads to emission bathochromic shift, increased Stokes shift, enhanced photo-stability and stronger emission for several dyes. The strategy greatly expands the current fluorophores’ repertoire for reliable bioimaging applications, as demonstrated here with ratiometric imaging of cells and tissues.     

Organophosphites: An Addition to the Arsenal of Organocatalysts

Organophosphites are nucleophilic in nature and can act as a good leaving group owing to the stability of the phosphite anion. This dual reactivity makes them good candidates for nucleophilic organocatalysis. However, phosphites were introduced only in 2004 as the umpolung catalyst for acylsilane substrates utilizing sequential Brook rearrangements. Very recently, phosphites have been reported to catalyze aza-rearrangements and radical reactions. In this review, we discuss the reactivity parameters to understand its lack of use, as well as the potential for catalysis.     

Magnesium‐Catalyzed Hydroboration of Terminal and Internal Alkynes

A magnesium‐catalyzed hydroboration of alkynes providing good yields and selectivities for a wide range of terminal and symmetrical and unsymmetrical internal alkynes has been developed. The compatibility with many functional groups makes this magnesium catalyzed procedure attractive for late stage functionalization. Experimental mechanistic investigations and DFT calculations reveal insights into the reaction mechanism of the magnesium catalyzed protocol.