Response of portable gamma monitors for dose rate measurements under various radiation conditions

Journal of Radioanalytical and Nuclear Chemistry - Responses of the hand-held gamma monitors available for the ambient dose equivalent rate measurements in the Federation of Bosnia and Herzegovina...     

Characterization of Food Packaging Films with Blackcurrant Fruit Waste as a Source of Antioxidant and Color Sensing Intelligent Material

Chitosan and pectin films were enriched with blackcurrant pomace powder (10 and 20% (w/w)), as bio-based material, to minimize food production losses and to increase the functional properties of produced films aimed at food coatings and wrappers. Water vapor permeability of active films increased up to 25%, moisture content for 27% in pectin-based ones, but water solubility was not significantly modified. Mechanical properties (tensile strength, elongation at break and Young’s modulus) were mainly decreased due to the residual insoluble particles present in blackcurrant waste. FTIR analysis showed no significant changes between the film samples. The degradation temperatures, determined by DSC, were reduced by 18 °C for chitosan-based samples and of 32 °C lower for the pectin-based samples with blackcurrant powder, indicating a disturbance in polymer stability. The antioxidant activity of active films was increased up to 30-fold. Lightness and redness of dry films significantly changed depending on the polymer type. Significant color changes, especially in chitosan film formulations, were observed after exposure to different pH buffers. This effect is further explored in formulations that were used as color change indicators for intelligent biopackaging.     

An implementation of structural change detection procedure based on experimental and numerical model correlation

A correlation of the experimental and the numerical model is implemented in order to detect structural change. The implementation of the method involves two steps: in the first the respective location is detected, and in the second the structural change is quantified. The method can detect changes in mass, stiffness or both. The numerical simulations demonstrate that the method is accurate and reliable. The method is implemented analytically and experimentally in parallel with laboratory test-cases. Improvements of the procedure are suggested and implemented in order to study the applicability to real-world cases. This study shows that model update significantly contributes to the successful structural change detection. The influence of the model reduction and model update on the detection accuracy is studied.     

Complexes of N‐Thiophosphorylthiourea α‐NaphthylNHC(S)NHP(S)(OiPr)2 (HL) with Copper(I). Crystal Structures of HL and Cu(PPh3)2L

Reaction of the potassium salt of N‐thiophosphorylated thiourea α‐naphthylNHC(S)NHP(S)(OiPr)₂ ( HL ) with Cu(PPh₃)₃I in aqueous EtOH/CH₂Cl₂ leads to the mononuclear complex [Cu(PPh₃)₂L–S,S′]. By using copper(I) iodide instead ofCu(PPh₃)₃I, the polynuclear complex [Cu_n(L–S,S′)_n] was obtained. The structures of these compounds were investigated by elemental analysis, ¹H and ³¹P{¹H} NMR and IR spectroscopy. The crystal structures of HL and Cu(PPh₃)₂L were determined by single‐crystal X‐ray diffraction.     

Bounds on the largest Kronecker and induced multiplicities of finite groups

We give new bounds and asymptotic estimates on the largest Kronecker and induced multiplicities of finite groups. The results apply to large simple groups of Lie type and other groups with few conjugacy classes.     

Numerical simulation of power law and yield stress fluid flows in double concentric cylinder with slotted rotor and vane geometries

In our previous report, we showed that a rheometer equipped with a double concentric cylinder geometry with slotted rotor could effectively reduce wall slip effects and thus it could be used as an alternative to a rheometer with a vane geometry in yield stress measurements. Here, we use three-dimensional CFD simulation to compare these two geometries for rheological measurements of power law and yield stress fluids. Our results indicate that the double concentric cylinder rheometer with slotted rotor (DCCR/SR) is able to accurately measure rheological properties of a wider spectrum of test fluids than a vane rheometer because of significant reduction of the end and secondary flow effects.     

Halogen/lithium exchange in hydrocarbon media; basic and continuous reactor studies

The halogen/lithium (X/Li) exchange’s usefulness is challenged by the extreme conditions employed during the conversion of a bromo or an iodo substituent to an organolithium intermediate. Our preliminary disclosure reveals that simple X/Li exchanges can be accomplished at ambient temperature and in doped hydrocarbon media using n-BuLi. Use of a continuous reactor featuring brief reaction times (?1 s) and large product throughputs further facilitates the production of a product resulting from a sequential X/Li exchange and nucleophilic addition.     

Complexes of N-Phosphorylated Thioureas RNHC(S)NHP(O)(OiPr)2 (R = 2-MeC6H4, 2,6-Me2C6H3, 2,4,6-Me3C6H2) With Nickel(II)

The reaction of O,O′-diisopropylphosphoric acid isothiocyanate (iPrO)₂P(O)NCS with 2-methylaniline 2-MeC₆H₄NH₂, 2,6-dimethylaniline 2,6-Me₂C₆H₃NH₂, or 2,4,6-trimethylaniline 2,4,6-Me₃C₆H₂NH₂ leads to the N-phosphorylated thioureas RNHC(S)NHP(O)(OiPr)₂ (R = 2-MeC₆H₄?, HL^I ; 2,6-Me₂C₆H₃?, HL^II ; 2,4,6-Me₃C₆H₂?, HL^III ). Reaction of the potassium salts of HL^{I –III} with Ni(II) in aqueous EtOH leads to [Ni(L^I–III-N,S)₂] ([NiL^I–III ₂ ]) chelate complexes. The compounds obtained were investigated by ¹H, ³¹P{¹H} NMR spectroscopy and microanalysis. The molecular structure of the thiourea HL^III was elucidated by single crystal X-ray diffraction analysis. Single crystal X-ray diffraction studies showed that HL^III forms both intra- and intermolecular hydrogen bonds, which in turn leads to the formation of polymeric chains. One of the intermolecular hydrogen bonds is of the type N?H…S. Moreover, the formation of intermolecular C?H…η⁶-phenyl interactions was established.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Density and Viscosity of a Ternary $$ x_{1} $$ 1-He xene(1) + $$ x_{2} $$ x2 1-Octene(2) + (1 − − x2) 1-Decene(3) Mi xture at High Temperatures and High Pressures

The density and viscosity of a ternary 1-hexene(1) + 1-octene(2) +1-decene(3) mixture (\( w_{1} = w_{2} = w_{3} = 0.333 \) weight fractions or \( x_{1} = 0.4257 \),\( x_{2} = 0.3190 \), \( x_{3} = 0.2553 \) mole fractions of 1-hexene, 1-octene, and 1-decene, respectively) have been simultaneously measured over the temperature range from (298 to 471) K and at pressures up to 196 MPa using a combined method of hydrostatic weighing and falling-body techniques, respectively. The combined expanded uncertainties of the density, pressure, temperature, concentration, and viscosity measurements at the 95% confidence level with a coverage factor of k = 2 are estimated to be (0.15 to 0.30)%, 0.05%, 0.02 K, 0.005 mol%, and (1.5 to 2.0)%, respectively. The measured densities and viscosities were used to calculate the excess molar volumes and viscosity differences. The excess molar properties (\( G_{\text{m}}^{\text{E}} , \, H_{\text{m}}^{\text{E}} , \, S_{\text{m}}^{\text{E}} \) and \( C_{\text{pm}}^{\text{E}} \)) and their pressure derivatives as a function of temperature and pressure have been calculated using the derived excess molar volumes. The measured viscosities were used to develop a theoretically based viscosity correlation model (Arrhenius–Andrade type equation) for the mixture.     

Crystal Structure and Interaction of 6-Amino Coumarin with Nitrite Ion for Its Selective Fluorescence Detection

ABSTRACT

6-Amino coumarin has been established as an efficient nitrite ion selective fluorescent sensor. The developed method shows linearity up to 1.6 × 10^?6 mol L^?1 of nitrite ion concentration. Interference from other common anions is almost negligible. The reagent shows strong binding affinity towards nitrite ion as evident from its binding constant value (5.8 × 10⁴), estimated by Stern-Volmer method. Some real samples were analyzed. Single crystal X-ray structure of the reagent is reported. Preliminary computational studies on the molecular level interaction between the reagent and nitrite ion were performed by density functional theory (DFT, B3LYP) method.