Simultaneous determination of 75 abuse drugs including amphetamines,benzodiazepines, cocaine,opioids, piperazines,zolpidem and metabolites in human hair samples using liquid chromatography–tandem mass spectrometry

A liquid chromatography–tandem mass spectrometric method for the simultaneous determination of 75 abuse drugs and metabolites, including 19 benzodiazepines, 19 amphetamines, two opiates, eight opioids, cocaine, lysergic acid diethylamide, zolpidem, three piperazines and 21 metabolites in human hair samples, was developed and validated. Ten‐milligram hair samples were decontaminated, pulverized using a ball mill, extracted with 1 mL of methanol spiked with 28 deuterated internal standards in an ultrasonic bath for 60 min at 50°C, and purified with Q‐sep dispersive solid‐phase extraction tubes. The purified extracts were evaporated to dryness and the residue was dissolved in 0.1 mL of 10% methanol. The 75 analytes were analyzed on an Acquity HSS T3 column using gradient elution of methanol and 0.1% formic acid and quantified in multiple reaction monitoring mode with positive electrospray ionization. Calibration curves were linear (r ≥ 0.9951) from the lower limit of quantitation (2–200 pg/mg depending on the drug) to 2000 pg/mg. The coefficients of variation and accuracy for intra‐ and inter‐assay analysis at three QC levels were 4.3–12.9% and 89.2–109.1%, respectively. The overall mean recovery ranged from 87.1 to 105.3%. This method was successfully applied to the analysis of 11 forensic hair samples obtained from drug abusers.     

Blue electroluminescent materials based on indeno[1,2-a]arene derivatives for Organic Light-Emitting Diodes

Abstract

In this study, as a continuous effort for searching efficient blue-emitting materials, we designed and synthesized materials based on indeno[1,2-a]arene. OLED devices using these materials were fabricated in the following sequence; ITO (180?nm)/N,N'-diphenyl-N,N'-(2-napthyl)-(1,1'-phenyl)-4,4'-diamine (NPB) (50?nm)/emitting materials (30?nm)/4,7-diphenyl-1,10-phenanthroline (Bphen) (30?nm)/Liq/Al (2/100?nm). Particularly, a device using 7,7-dimethyl-7H-indeno[1,2-a]pyrene as emitter showed maximum values of luminous efficiency, power efficiency, and external quantum efficiency of 1.10?cd/A, 0.49?lm/W, 1.47% at 20?mA/cm², respectively with CIE (x,y) coordinates of (0.15, 0.08) at 6.0V.     

First-principles computational approach for innovative design of highly functional electrocatalysts in fuel cells

Design of highly active and stable electrocatalyst is a major objective in a fuel cell. The special situation imposed to the electrocatalyst such as one of the most sluggish catalysis of oxygen reduction reaction, inherent structural instability of dispersed nanoparticle, harsh electrochemical conditions of electric potential and nonzero pH aqueous solution requires unique attention in the design. Considering that various attempts have been made for the purpose, high-speed but rigorous formalisms to evaluate the performance of candidates are crucial.This review article briefly introduces recently developed first-principles computational methodologies mainly applied to catalytic activity and electrochemical stability of electrocatalysts in proton exchange membrane fuel cells. Innovative design principles deduced from the outcomes are clearly discussed.     

Close‐Packed Two‐Dimensional Silver Nanoparticle Arrays: Quadrupolar and Dipolar Surface Plasmon Resonance Coupling

Silver nanoparticles (NPs) ranging in size from 40 to 100 nm were prepared in high yield by using an improved seed‐mediated method. The homogeneous Ag NPs were used as building blocks for 2D assembled Ag NP arrays by using an oil/water interface. A close‐packed 2D array of Ag NPs was fabricated by using packing molecules (3‐mercaptopropyltrimethoxysilane) to control the interparticle spacing. The homogeneous 2D Ag NP array exhibited a strong quadrupolar cooperative plasmon mode resonance and a dipolar red‐shift relative to individual Ag NPs suspended in solution. A well‐arranged 2D Ag NP array was embedded in polydimethylsiloxane film and, with biaxial stretching to control the interparticle distance, concomitant variations of the quadrupolar and dipolar couplings were observed. As the interparticle distance increased, the intensity of the quadrupolar cooperative plasmon mode resonance decreased and dipolar coupling completely disappeared. The local electric field of the 2D Ag NP array was calculated by using finite difference time domain simulation and qualitatively showed agreement with the experimental measurements.     

Readily Accessible and Predictable Naphthalene‐Based Two‐Photon Fluorophore with Full Visible‐Color Coverage

Herein we report 22 acedan‐derived, two‐photon fluorophores with synthetic feasibility and full coverage of visible wavelength emission. The emission wavelengths were predicted by computational analysis, which enabled us to visualize multicolor images by two‐photon excitation with single wavelength, and to design a turn‐on, two‐photon fluorescence sensor for endogenous H₂O₂ in Raw 264.7 macrophage and rat brain hippocampus ex vivo.     

Monolayer Co3O4 Inverse Opals as Multifunctional Sensors for Volatile Organic Compounds

Monolayers of periodic porous Co₃O₄ inverse opal (IO) thin films for gas‐sensor applications were prepared by transferring cobalt‐solution‐dipped polystyrene (PS) monolayers onto sensor substrates and subsequent removal of the PS template by heat treatment. Monolayer Co₃O₄ IO thin films having periodic pores (d≈500 nm) showed a high response of 112.9 to 5 ppm C₂H₅OH at 200 °C with low cross‐responses to other interfering gases. Moreover, the selective detection of xylene and methyl benzenes (xylene+toluene) could be achieved simply by tuning the sensor temperature to 250 and 275 °C, respectively, so that multiple gases can be detected with a single chemiresistor. Unprecedentedly high ethanol response and temperature‐modulated control of selectivity with respect to ethanol, xylene, and methyl benzenes were attributed to the highly chemiresistive IO nanoarchitecture and to the tuned catalytic promotion of different gas‐sensing reactions, respectively. These well‐ordered porous nanostructures could have potential in the field of high‐performance gas sensors based on p‐type oxide semiconductors.     

Analysis of phantom centering positioning on image noise and radiation dose in axial scan type of brain CT

ABSTRACT

This study examined the dose and image quality according to the position change of a human phantom in a CT scan. This study used an MDCT 128 Slice CT Scanner instrument. An axial scan was performed with a 16 cm CTDI phantom of a human phantom, and the dose was measured using a pencil chamber meter. The phantom was scanned 10 cm above and below the isocenter and 15 cm above the right and left. The position of the phantom is indicated by C-0 in the isocenter position, S-10 in the upper 10 cm, I-10 in the lower 10 cm, R-15 in the right 15 cm, and L-15 in the left 15 cm. The test was performed 30 times using the brain CT protocol to calculate the dose and the dose width product (DWP). The acquired images were analyzed using the ImageJ program. Statistical analysis was performed using SPSS with one-way ANOVA (p < .05). The mean DWP values of the CT scanner were C-0 31.97 mGy·cm, S-10 24.52 mGy·cm, I-10 24.28 mGy· cm, R-15 17.95 mGy·cm, and L15 17.6 mGy·cm. Compared to the isocenter (C-0), the DLP values measured at each site were 23.3% for S-10, 24% for I-10, 43.8% for R-15, and 44.9% for L15. A significant difference in the one-way ANOVA statistical process was observed (p>0.05). C-0 was measured to be 7.42 HU, S-10 7.87 HU, I-10 8.4 HU, R-15 117 HU, and L-15 13.6 HU for evaluating the image quality. Compared to C-0, S-10 was 5.39%, I-10 was 13.2%, R-15 was 57.6%, and L-15 was 83.2%. The PSNR for S-10, I-10, R-15, and L-15 was 17.37, 17.5, 16.62, and 16.37 dB, respectively. A good quality image can be obtained by positioning the subject precisely in the isocenter in the axial scan, if possible, because the irradiated dose to the subject is low, which can lead to an increase in noise in image reconstruction.     

Molecular Encapsulation of Trimeric Chromium Carboxylate Clusters in Metal–Organic Frameworks and Propylene Sorption

Oxo-bridged trimeric chromium acetate clusters [Cr₃O(OOCCH₃)₆(H₂O)₃]NO₃ have been encapsulated for the first time in the mesoporous cages of the chromium terephthalate MIL-101(Cr). The isolated clusters in MIL-101(Cr) have increased affinity towards propylene compared to propane, due to generation of a new kind of pocket-based propylene-binding site, as supported by DFT calculations.     

Activation of α-Fe2O3 for Photoelectrochemical Water Splitting Strongly Enhanced by Low Temperature Annealing in Low Oxygen Containing Ambient

Photoelectrochemical (PEC) water splitting is a promising method for the conversion of solar energy into chemical energy stored in the form of hydrogen. Nanostructured hematite (α-Fe₂O₃) is one of the most attractive materials for a highly efficient charge carrier generation and collection due to its large specific surface area and the short minority carrier diffusion length. In the present work, the PEC water splitting performance of nanostructured α-Fe₂O₃ is investigated which was prepared by anodization followed by annealing in a low oxygen ambient (0.03 % O₂ in Ar). It was found that low oxygen annealing can activate a significant PEC response of α-Fe₂O₃ even at a low temperature of 400 °C and provide an excellent PEC performance compared with classic air annealing. The photocurrent of the α-Fe₂O₃ annealed in the low oxygen at 1.5 V vs. RHE results as 0.5 mA cm⁻², being 20 times higher than that of annealing in air. The obtained results show that the α-Fe₂O₃ annealed in low oxygen contains beneficial defects and promotes the transport of holes; it can be attributed to the improvement of conductivity due to the introduction of suitable oxygen vacancies in the α-Fe₂O₃. Additionally, we demonstrate the photocurrent of α-Fe₂O₃ annealed in low oxygen ambient can be further enhanced by Zn-Co LDH, which is a co-catalyst of oxygen evolution reaction. This indicates low oxygen annealing generates a promising method to obtain an excellent PEC water splitting performance from α-Fe₂O₃ photoanodes.