Influences of Sr2+ Doping on Microstructure,Giant Dielectric Behavior,and Non-Ohmic Properties of CaCu3Ti4O12/CaTiO3 Ceramic Composites

The microstructure, dielectric response, and nonlinear current-voltage properties of Sr²⁺-doped CaCu₃Ti₄O₁₂/CaTiO₃ (CCTO/CTO) ceramic composites, which were prepared by a solid-state reaction method using a single step from the starting nominal composition of CCTO/CTO/xSrO, were investigated. The CCTO and CTO phases were detected in the X-ray diffraction patterns. The lattice parameter increased with increasing Sr²⁺ doping concentration. The phase compositions of CCTO and CTO were confirmed by energy-dispersive X-ray spectroscopy with elemental mapping in the sintered ceramics. It can be confirmed that most of the Sr²⁺ ions substituted into the CTO phase, while some minor portion substituted into the CCTO phase. Furthermore, small segregation of Cu-rich was observed along the grain boundaries. The dielectric permittivity of the CCTO/CTO composite slightly decreased by doping with Sr²⁺, while the loss tangent was greatly reduced. Furthermore, the dielectric properties in a high-temperature range of the Sr²⁺-doped CCTO/CTO ceramic composites can be improved. Interestingly, the nonlinear electrical properties of the Sr²⁺-doped CCTO/CTO ceramic composites were significantly enhanced. The improved dielectric and nonlinear electrical properties of the Sr²⁺-doped CCTO/CTO ceramic composites were explained by the enhancement of the electrical properties of the internal interfaces.     

Stability of carotenoid diets during feed processing and under different storage conditions

The stability of formulated carotenoid diets during feed processing and under different storage conditions were studied. All carotenoid diets were split into two groups with one group containing BHT (acting as an antioxidant) at 250 ppm and the other without BHT. The experiment was divided into two parts. First, all diets were evaluated in total carotenoid (TC) loss during feed processing, in dry mixed feeds after being processed and dried. In the final part, the completed dietary carotenoids were stored in an aluminum foil bag, the top of which was sealed with a bag sealer and kept under different storage conditions at 26-28 °C and 4 °C. The stability of the TC was observed during an 8-week trial period. The results showed that the diet pelleting process did not affect the carotenoid content of the diets, and the best storage temperature for the formulated carotenoid diet was at 4 °C. However, an antioxidant was added to assist in energy saving before feed processing. Thus, the addition of BHT at 250 ppm can be done at normal room temperature in order to reduce oxidation that might cause a loss of TC quantities in diets.     

Ultrasonic attenuation spectroscopy for multivariate statistical process control in nanomaterial processing

Ultrasonic attenuation spectroscopy (UAS) is an attractive process analytical technology (PAT) for on-line real-time characterisation of slurries for particle size distribution (PSD) estimation. It is however only applicable to relatively low solid concentrations since existing instrument process models still cannot fully take into account the phenomena of particle–particle interaction and multiple scattering, leading to errors in PSD estimation. This paper investigates an alternative use of the raw attenuation spectra for direct multivariate statistical process control (MSPC). The UAS raw spectra were processed using principal component analysis. The selected principal components were used to derive two MSPC statistics, the Hotelling's T² and square prediction error (SPE). The method is illustrated and demonstrated by reference to a wet milling process for processing nanoparticles.     

Comparative Pharmacokinetics after Feeding Fancy Carp (Cyprinus carpio) with Diets Containing Carotenoids from Natural Sources [Tea (Camellia sinensis), Mulberry (Morus alba), and Cassava (Manihot esculenta) Leaf]

JPC – Journal of Planar Chromatography – Modern TLC - The carotenoid composition of tea, mulberry, and cassava leaf has been determined by TLC on silica gel 60 with 75:15:10 (v/v)...     

Application of the maximum entropy technique in tomographic reconstruction from laser diffraction data to determine local spray drop size distribution

This work proposes a new deconvolution technique to obtain local drop size distributions from line-of-sight intensity data measured by laser diffraction technique. The tomographic reconstruction, based on the maximum entropy (ME) technique, is applied to forward scattered light signal from a laser beam scanning horizontally through the spray on each plane from the center to the edge of spray, resulting in the reconstructed scattered light intensities at particular points in the spray. These reconstructed intensities are in turn converted to local drop size distributions. Unlike the classical method of the onion peeling technique or other mathematical transformation techniques that yield unrealistic negative scattered light intensity solutions, the maximum entropy constraints ensure positive light intensity. Experimental validations to the reconstructed results are achieved by using phase Doppler particle analyzer (PDPA). The results from the PDPA measurements agree very well with the proposed ME tomographic reconstruction.     

Significantly Improved Colossal Dielectric Properties and Maxwell—Wagner Relaxation of TiO2—Rich Na1/2Y1/2Cu3Ti4+xO12 Ceramics

In this work, the colossal dielectric properties and Maxwell—Wagner relaxation of TiO₂–rich Na_1/2Y_1/2Cu₃Ti_4+xO₁₂ (x = 0–0.2) ceramics prepared by a solid-state reaction method are investigated. A single phase of Na_1/2Y_1/2Cu₃Ti₄O₁₂ is achieved without the detection of any impurity phase. The highly dense microstructure is obtained, and the mean grain size is significantly reduced by a factor of 10 by increasing Ti molar ratio, resulting in an increased grain boundary density and hence grain boundary resistance (R_gb). The colossal permittivities of ε′ ~ 0.7–1.4 × 10⁴ with slightly dependent on frequency in the frequency range of 10²–10⁶ Hz are obtained in the TiO₂–rich Na_1/2Y_1/2Cu₃Ti_4+xO₁₂ ceramics, while the dielectric loss tangent is reduced to tanδ ~ 0.016–0.020 at 1 kHz due to the increased R_gb. The semiconducting grain resistance (R_g) of the Na_1/2Y_1/2Cu₃Ti_4+xO₁₂ ceramics increases with increasing x, corresponding to the decrease in Cu⁺/Cu²⁺ ratio. The nonlinear electrical properties of the TiO₂–rich Na_1/2Y_1/2Cu₃Ti_4+xO₁₂ ceramics can also be improved. The colossal dielectric and nonlinear electrical properties of the TiO₂–rich Na_1/2Y_1/2Cu₃Ti_4+xO₁₂ ceramics are explained by the Maxwell–Wagner relaxation model based on the formation of the Schottky barrier at the grain boundary.     

Deconvolution with Maximum Entropy Solution to Determine Local Extinction Coefficient and Local Volume Concentration Values from Laser Diffraction Data

The traditional use of the laser diffraction technique provides line‐of‐sight liquid spray drop‐size distribution. However, deconvolution of the measurements can be performed for axisymmetric spray in order to determine local spray characteristics. In a previous publication, a new deconvolution technique making use of the maximum entropy principle was established and applied to determine the local drop‐size distributions. The entire approach was experimentally validated. In this work, the technique is employed to determine local extinction coefficient values. As in the previous investigation, the measurement procedure consists of scanning a laser beam through the spray cross‐section from the center to the edge of the spray. By use of the transmittance theory, the local extinction coefficients allow the local volume concentrations to be calculated. This theory introduces the mean scattering coefficient. The results show that this coefficient must be determined as a function of the Sauter mean diameter in order to avoid overestimation of the volume concentration. Although no proper validation is presented, the coherence of the overall approach is discussed in detail and solutions for improving the spatial resolution are presented. Finally, the local volume concentrations are combined with the local drop‐size distribution to provide local volume‐weighted, drop‐size distributions. These distributions provide information on the localization of the drops according to their diameter as well as on the spatial liquid distribution. This work illustrates applications and performances of laser diffraction technique that are rarely used.     

Effects of temperature and holding time during torrefaction on the pyrolysis behaviors of woody biomass

Torrefaction is the thermal treatment techniques performed at relatively low temperature (<300 °C) in an inert atmosphere, which aims to improve the fuel properties attractively. In this study, woody biomass (Leucaena leucocephala) was torrefied at various temperatures and holding times and the pyrolysis behaviors of the torrefied wood were examined in detail by using TG-MS technique. It was found that the carbon content and the calorific value of the torrefied leucaena increased significantly when temperature and holding time during the torrefaction increased. From the TG-MS analysis, the pyrolysis behaviors of the torrefied leucaena were significantly different from those of the raw leucaena. The char yield at 800 °C for the torrefied leucaena was increased when increasing the holding time during the torrefaction. On the other hand, the tar yield during the pyrolysis decreased significantly with the increase in the holding time during the torrefaction. Through the results from the TG-MS analysis, it was concluded that the structure of leucaena was changed by the torrefaction at temperature below 275 °C and the cross-linking reactions occurred during the pyrolysis resulting in increase in char yields and decrease in tar yields. It was also suggested that the longer the holding time during the torrefaction, the more the cross-linking reactions proceed during the pyrolysis. The results obtained from the study provide the basic information for the pyrolyser and/or gasifier design by using torrefied biomass as a fuel.