Synergistic Surface Passivation of CH3NH3PbBr3 Perovskite Quantum Dots with Phosphonic Acid and (3-Aminopropyl)triethoxysilane

CH₃NH₃PbBr₃ perovskite quantum dots (PQDs) are synthesized by using four different linear alkyl phosphonic acids (PAs) in conjunction with (3-aminopropyl)triethoxysilane (APTES) as capping ligands. The resultant PQDs are characterized by means of XRD, TEM, Raman spectroscopy, FTIR spectroscopy, UV/Vis, photoluminescence (PL), time-resolved PL, and X-ray photoelectron spectroscopy (XPS). PA chain length is shown to control the PQD size (ca. 2.9–4.2 nm) and excitonic absorption band positions (λ=488–525 nm), with shorter chain lengths corresponding to smaller sizes and bluer absorptions. All samples show a high PL quantum yield (ca. 46–83 %) and high PL stability; this is indicative of a low density of band gap trap states and effective surface passivation. Stability is higher for smaller PQDs; this is attributed to better passivation due to better solubility and less steric hindrance of the shorter PA ligands. Based on the FTIR, Raman, and XPS results, it is proposed that Pb²⁺ and CH₃NH₃⁺ surface defects are passivated by R−PO₃²⁻ or R−PO₂(OH)⁻, whereas Br⁻ surface defects are passivated by R−NH₃⁺ moieties. This study establishes the combination of PA and APTES ligands as a highly effective dual passivation system for the synergistic passivation of multiple surface defects of PQDs through primarily ionic bonding.     

Ligand Displacement Reaction Paths in a Diiron Hydrogenase Active Site Model Complex

The mechanism and energetics of CO, 1‐hexene, and 1‐hexyne substitution from the complexes (SBenz)₂[Fe₂(CO)₆] (SBenz=SCH₂Ph) ( 1 ‐CO), (SBenz)₂[Fe₂(CO)₅(η²‐1‐hexene)] ( 1 ‐(η²‐1‐hexene)), and (SBenz)₂[Fe₂(CO)₅(η²‐1‐hexyne)] ( 1 ‐(η²‐1‐hexyne)) were studied by using time‐resolved infrared spectroscopy. Exchange of both CO and 1‐hexyne by P(OEt)₃ and pyridine, respectively, proceeds by a bimolecular mechanism. As similar activation enthalpies are obtained for both reactions, the rate‐determining step in both cases is assumed to be the rotation of the Fe(CO)₂L (L=CO or 1‐hexyne) unit to accommodate the incoming ligand. The kinetic profile for the displacement of 1‐hexene is quite different than that for the alkyne and, in this case, both reaction channels, that is, dissociative (S_N1) and associative (S_N2), were found to be competitive. Because DFT calculations predict similar binding enthalpies of alkene and alkyne to the iron center, the results indicate that the bimolecular pathway in the case of the alkyne is lower in free energy than that of the alkene. In complexes of this type, subtle changes in the departing ligand characteristics and the nature of the mercapto bridge can influence the exchange mechanism, such that more than one reaction pathway is available for ligand substitution. The difference between this and the analogous study of (μ‐pdt)[Fe(CO)₃]₂ (pdt=S(CH₂)₃S) underscores the unique characteristics of a three‐atom S?S linker in the active site of diiron hydrogenases.     

Stereochemical Studies of the Karlotoxin Class Using NMR Spectroscopy and DP4 Chemical‐Shift Analysis: Insights into their Mechanism of Action

After publication of karlotoxin 2 (KmTx2; 1 ), the harmful algal bloom dinoflagellate Karlodinium sp. was collected and scrutinized to identify additional biologically active complex polyketides. The structure of 1 was validated and revised at C49 using computational NMR tools including J‐based configurational analysis and chemical‐shift calculations. The characterization of two new compounds [KmTx8 ( 2 ) and KmTx9 ( 3 )] was achieved through overlaid 2D HSQC NMR techniques, while the relative configurations were determined by comparison to 1 and computational chemical‐shift calculations. The detailed evaluation of 2 using the NCI‐60 cell lines, NMR binding studies, and an assessment of the literature supports a mode of action (MoA) for targeting cancer‐cell membranes, especially of cytostatic tumors. This MoA is uniquely different from that of current agents employed in the control of cancers for which 2 shows sensitivity.     

Computational study of pH‐responsive di‐lanthanide complexes

Lanthanide complexes have found extensive use as luminescent probes for biological and medical investigations. Recently, a di‐europium complex that exhibits pH‐dependent luminescence‐decay was reported, and the ligand in that complex includes a large number of ionizable sites. To better understand the pH‐dependence of luminescence‐decay of this complex, the pK _a's of all tautomers of the di‐Lu³⁺ version of this complex were calculated computationally. The calculated Boltzmann‐averaged pK _a's of the complex are 5.85, ?0.21, and ?1.47 for the di‐Lu³⁺ complex in its first, second, and third protonation states, respectively. These pK _a values across protonation states indicate that changes in luminescence‐decay rate at physiologically relevant pH may be related to first protonation event of the complex exclusively.     

Twist-Bend Nematic Glasses: The Synthesis and Characterisation of Pyrene-based Nonsymmetric Dimers

A selection of pyrene-based liquid crystal dimers have been prepared, containing either methylene-ether or diether linked spacers of varying length and parity. All the diether linked materials, CBOnO.Py (n=5, 6, 11, 12), exhibit conventional nematic and smectic A phases, with the exception of CBO11O.Py which is exclusively nematic. The methylene-ether linked dimer, CBnO.Py, with an even-membered spacer (n=5) was solely nematogenic, but odd-members (n=6, 8, 10) exhibited both nematic and twist-bend nematic phases. Replacement of the cyanobiphenyl fragment by cyanoterphenyl giving CT6O.Py, gave elevated melting and nematic-isotropic transition temperatures, and SmA and SmC_A phases were observed on cooling the nematic phase. Intermolecular face-to-face associations of the pyrene moieties drive glass formation, and all these materials have a glass transition temperature at or above room temperature. The stability of the glassy twist-bend nematic phase allowed for its study using AFM, and the helical pitch length, P_TB, was measured as 6.3 and 6.7 nm for CB6O.Py and CB8O.Py, respectively. These values are comparable to the shortest pitch of a twist-bend nematic phase measured to date.     

Fast Li-Ion Conduction in Spinel-Structured Solids

Spinel-structured solids were studied to understand if fast Li⁺ ion conduction can be achieved with Li occupying multiple crystallographic sites of the structure to form a “Li-stuffed” spinel, and if the concept is applicable to prepare a high mixed electronic-ionic conductive, electrochemically active solid solution of the Li⁺ stuffed spinel with spinel-structured Li-ion battery electrodes. This could enable a single-phase fully solid electrode eliminating multi-phase interface incompatibility and impedance commonly observed in multi-phase solid electrolyte–cathode composites. Materials of composition Li_1.25M(III)_0.25TiO₄, M(III) = Cr or Al were prepared through solid-state methods. The room-temperature bulk Li⁺-ion conductivity is 1.63 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄. Addition of Li₃BO₃ (LBO) increases ionic and electronic conductivity reaching a bulk Li⁺ ion conductivity averaging 6.8 × 10⁻⁴ S cm⁻¹, a total Li-ion conductivity averaging 4.2 × 10⁻⁴ S cm⁻¹, and electronic conductivity averaging 3.8 × 10⁻⁴ S cm⁻¹ for the composition Li_1.25Cr_0.25Ti_1.5O₄ with 1 wt. % LBO. An electrochemically active solid solution of Li_1.25Cr_0.25Mn_1.5O₄ and LiNi_0.5Mn_1.5O₄ was prepared. This work proves that Li-stuffed spinels can achieve fast Li-ion conduction and that the concept is potentially useful to enable a single-phase fully solid electrode without interphase impedance.     

Application of the single comparator method to instrumental photon activation analysis

Journal of Radioanalytical and Nuclear Chemistry - Instrumental photon activation analysis (IPAA) is nondestructive and multi-elemental analysis method like instrumental neutron activation...     

Consumer perspectives on genetic testing, research and services for ethnoculturally diverse populations

A panel of individuals from diverse ethnocultural backgrounds and representing a variety of genetic disorders presented their consumer perspectives on genetic programs, testing and services. Their remarks emphasized how misunderstanding and miscommunication between health care professionals and many of the populations for whom they provide services can lead to unfilled genetic service needs. Panelists recommended that health care professionals become more aware and knowledgeable about the diversity of customs, beliefs and cultures of those receiving their services. Only by building a foundation of trust and mutual respect will genetic testing, research and services become more accessible to individuals from diverse populations, their families and their communities.