Portable single-sided NMR measurements at variable temperatures: Implementation of a thermo-controlled device and application to the heating of bread dough

A temperature control unit was implemented to vary the temperature of samples studied on a commercial Mobile Universal Surface Explorer nuclear magnetic resonance (MOUSE-NMR) apparatus. The device was miniaturized to fit the maximum MOUSE sampling depth (25 mm). It was constituted by a sample holder sandwiched between two heat exchangers placed below and above the sample. Air was chosen as the fluid to control the temperature at the bottom of the sample, at the interface between the NMR probe and the sample holder, in order to gain space. The upper surface of the sample was regulated by the circulation of water inside a second heat exchanger placed above the sample holder. The feasibility of using such a device was demonstrated first on pure water and then on several samples of bread dough with different water contents. For this, T1 relaxation times were measured at various temperatures and depths and were then compared with those acquired with a conventional compact closed-magnet spectrometer. Discussion of results was based on biochemical transformations in bread dough (starch gelatinization and gluten heat denaturation). It was demonstrated that, within a certain water level range, and because of the low magnetic field strength of the MOUSE, a linear relationship could be established between T1 relaxation times and the local temperature in the dough sample.     

Optimization and sensitivity analysis of magneto-hydrodynamic natural convection nanofluid flow inside a square enclosure using response surface methodology

This article studies buoyancy-driven natural convection of a nanofluid affected by a magnetic field within a square enclosure with an individual conductive pin fin. The effects of electromagnetic forces, thermal conductivity, and inclination angle of pin fin were investigated using non-dimensional parameters. An extensive sensitivity analysis was conducted seeking an optimal heat transfer setting. The novelty of this work lies in including different contributing factors in heat transfer analysis, rigorous analysis of design parameters, and comprehensive mathematical analysis of solution domain for optimization. Results showed that magnetic strength diminished the heat transfer efficacy, while higher relative thermal conductivity of pin fin improved it. Based on the problem settings, we also obtained the relative conductivity value in which the heat transfer is optimal. Higher sensitivity of heat transfer was, though, noticed for both magnetic strength and fin thermal conductivity in comparison to fin inclination angle. Further studies, specifically with realistic geometrical configurations and heat transfer settings, are urged to translate current findings to industrial applications.

     

Solidifying framework nucleic acids

正Living organisms have developed their unique strategies during the natural evolution for building hard tissues with minerals, including silica, calcium carbonate, calcium phosphate, and ferric oxide [1]. Such biomineralized materials generally have complex hierarchical structures with excellent mechanical properties. Although bioinspired approaches have led to the creation of well-defined synthetic structural materials ranging from micro to macro scales, the rational design of discrete biomimetic structures at the nanoscale remains a grand challenge.     

Effects of multiple delays on dynamics of a five-neuron network model

A five-neuron network model with multiple delays is proposed. This paper presents the combined effect of different delays on the dynamics of the proposed network. Pitchfork bifurcation is discussed in detail with the variation of the value of coupled weight or attenuation rate of internal neurons. By analyzing the corresponding characteristic equation, some stable criteria on delay-dependence and delay-independence are derived including multiple delays and coupled weights and the periodic oscillation arises bifurcated from the trivial equilibrium after the network loses its stability. Stable regions on delay-dependence are displayed in the two delayed parameter plane. It is shown that multiple delays can produce stability switching between resting state and periodic activity. Finally, theoretical results are justified by providing two illustrative examples.     

Infinitely many reducts of homogeneous structures

It is shown that the countably infinite dimensional pointed vector space (the vector space equipped with a constant) over a finite field has infinitely many first order definable reducts. This implies that the countable homogeneous Boolean-algebra has infinitely many reducts.     

Extraction of methyl xanthines and their UHPLC–DAD determination in consumable beverages used in Eastern province of Saudi Arabia

Coffee and tea are the most widely consumed beverages worldwide. However, the consumer may be unaware of the exact amount of methyl xanthine (MX, i.e. caffeine [C], theobromine [TB] and theophylline [TH]) consumed, as most of the products do not list the proper amounts. This may lead to serious risks including cardiovascular, kidney and stimulant effects. The aim of the study was to determine the MX amount in ready-to-use beverages (coffee and tea) collected from various outlets in the city of Al-Khobar, Saudi Arabia. Forty different samples of espresso, black coffee and red tea were collected. A fast, reliable and efficient UHPLC–DAD method was developed and validated for MX determination. Total lipids were extracted and fractionated in order to determine glycolipids, phospholipids and neutral lipids. The r² value for the method was 0.980–0.988 in a linearity range of 0.5–200 ppm. The range for MX (C [0.02–2.39 mg/ml], TB [0.00–0.10 mg/ml] and TH [0.00–0.004 mg/ml]) and total lipids was 1–5 g. The amount of glycolipids (3.1 g) was higher among the lipid fractions followed by phospholipids (1.8 g) and neutral lipids (0.25 g). In general, espresso beverages (20–30 ml) contained high amounts of MX whereas black coffee beverages contained high amount of lipids. Most of the beverages expressed C, TB, TH, lipids or their fractions; however, the product with high amounts of MX and lipids at the same time was espresso (brands Chemistry and Wogard). Although the MX and lipid levels in these beverages well below the allowed limits, care must still be taken, especially when using the beverages with high serving volumes (200–250 ml) or coffee prepared via the filter method i.e. black coffee, using a high temperature for a longer time.     

Optimization of extraction and quantification technique for phenolics content of garlic (Allium sativum): An application for comparative phytochemical evaluation based on cultivar origin

A range of conventional, i.e. maceration, percolation, ultrasonic assisted, Soxhlet and Soxtec extraction (STE), to advanced extraction techniques of accelerated solvent extraction (ASE) was utilized for the first time in order to optimize the extract yield and recovery of phenolics—gallic acid (GA), rutin (RT) and quercetin (QT)—quantified via ultra-high performance liquid chromatography with diode array detector (UHPLC–DAD). The effect of solvents (n-hexane, dichloromethane and methanol) and temperature (60, 80 and 100°C) upon extraction yield, phenolic content and antioxidant activity (DPPH, ABTS and DPPH) was studied, and the method was validated in commercial food samples from Saudi Arabia, China and India. A high extract yield with percentage recovery was observed for STE (1221.10 mg/5 g; 24.42%) and ASE techniques (91.50 mg/1 g; 9.15%) in methanol at 100°C. UHPLC–DAD showed retention times (min) of 0.67, 1.93 and 1.90 for GA, RT and QT, respectively in the shortest runtime of 3 min. The yield for phenolics was higher for STE/ASE (ppm): 15.27/15.29 (GA), 85.24/37.56 (RT) and 52.20/33.40 (QT), respectively. In terms of antioxidant activities, low IC₅₀ values (μg/ml) of 1.09/1.18 (DPPH), 2.11/5.32 (ABTS) and 4.35/7.88 (phenazine methosulfate–nicotinamide adenine dinucleotide) were observed for STE and ASE, respectively. Multivariate analysis for STE showed a significant (P = 0.000) correlation for extraction type vs. extract yield and phenolics content; however, there was no significance for antioxidant activities vs. extraction type. ASE showed a positive correlation for solvent vs. extraction yield, phenolics and antioxidant activity; however, there was no correlation for extraction yield and DPPH activity. Principal component analysis for STE showed a major variability (52.02%) for extraction yield and phenolics in PC1 followed by PC2 (38.30%) for antioxidant activities. For ASE, PC1 (48.68%) showed a positive correlation for solvent vs. extraction yield and phenolics while PC2 (33.12%) showed a positive correlation for temperature and antioxidant activities. STE and ASE were the optimized extraction techniques for the garlic food sample while a significant effect of solvent and temperature was observed upon extraction yield, phenolics and antioxidant activity.     

Facile one-pot synthesis,butyrylcholinesterase and α-glucosidase inhibitory activities,structure–activity relationship,molecular docking and DNA–drug binding analysis of Meldrum’s acid derivatives

Research on Chemical Intermediates - Meldrum’s acid derivatives were facile synthesized by one-pot condensation process and characterized by NMR (1H, 13C, DEPT-90 and DEPT-135) and EI-MS. The...     

Prediction of branch on branch and topological characteristics of low‐density polyethylene polymerization by a novel stochastic approach

A novel approach using Monte Carlo method applied to simulation of low‐density polyethylene (LDPE) polymerization in tubular reactor showing topological characteristics, and the comprehensive kinetic mechanism has been taken into consideration. The results show the precise details of the structure of a chain in the three levels of the backbone, the main branches, and branches on branch. The chain types include dead polymer, dead polymer with unsaturated end, and live polymer with primary radical, secondary radical, and tertiary radical. In this work, the branches on branch were identified in terms of number, length, and position of the branch. Sixty percent of branches on branch are 1 to 5 carbons long, and the longest branch on branch is about 50 carbons. Thus, this study provides a tool for more accurately mapping the polymer chains architecture, superior to determine the number, and position of long‐ and short‐chain branches in past researches. Finally, this approach will advance the prediction of microstructure‐related properties of polymer one step further.