污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能研究

亚甲基蓝和环丙沙星是水体中2种污染物, 对生态环境有潜在危害. 本文以市政剩余活性污泥为原料, 氯化锌为活化剂热解制备污泥基吸附剂, 研究盐酸酸洗浓度、氯化锌浓度、热解温度、热解时间等对污泥基吸附剂吸附水中亚甲基蓝和环丙沙星性能的影响. 结果表明 (1)污泥基吸附剂对亚甲基蓝的吸附性能随盐酸酸洗浓度的增大而增加, 对环丙沙星的吸附性能则随盐酸酸洗浓度的增大呈先降后增趋势, 两者均在1.500mol·L-1盐酸浓度下取得最优值. (2)污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能随氯化锌浓度和热解温度的增加呈先升后降趋势, 在氯化锌浓度为4.0mol·L-1、热解温度为500℃时有最优值; 随着热解时间的延长, 污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能分别在500℃热解70min和80min时有最优值. (3)污泥基吸附剂的最佳制备条件为 氯化锌4.0mol·L-1活化2h、500℃热解70min和80min、1.500mol·L-1盐酸酸洗; 以此制得的污泥基吸附剂对亚甲基蓝和环丙沙星的去除率分别为97.7%和96.4%, 平衡吸附量分别为97.9mg·g-1和3.9mg·g-1, 且污泥基吸附剂对亚甲基蓝和环丙沙星的吸附过程均符合准二级动力学方程.     

Photoinduced dynamics of a cyanine dye: parallel pathways of non-radiative deactivation involving multiple excited-state twisted transients

Cyanine dyes are broadly used for fluorescence imaging and other photonic applications. 3,3′-Diethylthiacyanine (THIA) is a cyanine dye composed of two identical aromatic heterocyclic moieties linked with a single methine, –CH. The torsional degrees of freedom around the methine bonds provide routes for non-radiative decay, responsible for the inherently low fluorescence quantum yields. Using transient absorption spectroscopy, we determined that upon photoexcitation, the excited state relaxes along two parallel pathways producing three excited-state transients that undergo internal conversion to the ground state. The media viscosity impedes the molecular modes of ring rotation and preferentially affects one of the pathways of non-radiative decay, exerting a dominant effect on the emission properties of THIA. Concurrently, the polarity affects the energy of the transients involved in the decay pathways and further modulates the kinetics of non-radiative deactivation.     

Chemical equilibrium controlled synthesis of polyoxymethylene dimethyl ethers over sulfated titania

The chemical equilibrium and reaction kinetic behavior in the synthesis of polyoxymethylene dimethyl ethers(DMMn) were investigated over sulfated titania in order to reveal the decisive factor controlling the reaction. The results showed that the molar ratio of adjacent DMMn products in equilibrium solution had the same value, which depended absolutely on the reaction temperature. Meanwhile, the reactions had the same DMMn products distributions under varied reaction conditions. The equilibrium constants of the related step-wise reactions for DMMn formation were equal, which were calculated based on the bulk compositions of the reaction solution. And thus, the selectivity to DMMn was mainly controlled by the chemical equilibrium, i.e., thermodynamic control. In brief, the present results provide some guidance for future synthesis of DMMn.     

Scalable Synthesis of Piperazines Enabled by Visible‐Light Irradiation and Aluminum Organometallics

The development of more active C? H oxidation catalysts has inspired a rapid, scalable, and stereoselective assembly of multifunctional piperazines through a [3+3] coupling of azomethine ylides. A combination of visible‐light irradiation and aluminum organometallics is essential to promote this transformation, which introduces visible‐light photochemistry of main‐group organometallics and sets the basis for new and promising catalysts.     

Design optimization of a Class VII Flextensional Transducer

Class VII Flextensional Transducers (FTs) have been proposed as a means of overcoming the limitation of very high prestress in Class IV FTs. These transducers are made from shells shaped like dog bone and hence are also known as dog-bone shell transducers. In this work, we report design optimization of a low frequency aluminum shell Class VII FT, resonating at 2.5 kHz, using piezoelectric drive. Two and three dimensional Finite Element Modeling (FEM), with the help of a commercially available package ATILA have been used for the design optimization. Dimensional details of the base model have been adapted from previous literature. Parametric analyses have been done with respect to various aspects like type of rubber, shell height, shell material, etc. in order to optimize the design. Experimental results obtained from an initial prototype are also presented. The results match fairly well with the predicted values.     

N‐bromo‐hydantoin grafted polystyrene beads: Synthesis and nano‐micro beads characteristics for achieving controlled release of active oxidative bromine and extended microbial inactivation efficiency

N‐bromo‐hydantoin and N‐bromo‐5,5′‐dimethylhydantoin conjugated polystyrene beads were synthesized from chloromethyl polystyrene beads which differ in their particles size, crosslinking, nano‐micro porosity, and tunnels size on the surface, in order to study the effect of these parameters on oxidative halogen release and resultant activity, for water purification applications. The synthesized beads were characterized using elemental analysis, FT‐IR, solid state ¹³C‐NMR, and scanning electron microscope (SEM). The conjugation yield and kinetics in different solvents and bromine loading capacity were studied. The N‐bromoamine polystyrene beads were tested for water decontamination according to NSF 231 protocol. The release of active bromine was analyzed by spectrophotometer using a DPD‐1 kit and also studied the antimicrobial activity against Escherichia coli and MS2 phages. Bead's nano‐micro characteristics were found critical for oxidative halogen release control: rate stabilization and modulation, extension and also influences antimicrobial activity. The synthesized beads exhibited extended and stable release of bromine, 6 and 4 log reduction for E. coli and MS2, respectively for 250 L of passing contaminated water. Thus, N‐halamine hydantoins conjugated polystyrenes, chemically or kinetically release modified should have applications as disinfectants in water purification systems as well as medical field. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 596–610     

Xe对NO(X)微分截面和非弹性散射中的碰撞诱导旋转准直

本文对NO(X)-Xe碰撞系统在碰撞能量为519 cm^-1，测量了完全?-双峰分解的微分截面和碰撞引起的旋转准直力矩. 同时结合初始量子态选择，使用六极杆的非均质电场，借助量子态分辨的测量，利用(1+1'')共振增强的多光子电离和速度离子成像. 结果显示，微分截面以及偏振相关的微分截面均显示与从头算势能面上进行的量子力学散射计算[J. K?os etal. J. Chem. Phys. 137, 014312 (2012)]一致. 通过与准经典轨迹、硬壳势能的量子力学散射以及运动近端模型的比较，评估了势能对所测微分截面和碰撞引起的旋转准直力矩的影响.     

Solvent-Free Synthesis of Nano Zirconium Phenylphosphonates with Molten Phenylphosphonic Acid

Nanosized α-zirconium phenylphosphonate particles were successfully prepared by the reaction between different zirconium sources and molten phenylphosphonic acid in the absence of solvent. The resultant nanoplates exhibit particle sizes in the range of 15 to 30 nm. The use of a topotactic anion exchange method starting from α-zirconium phosphate instead resulted in the generation of 15 to 180 nm plates, while also resulting in nanoparticles with a higher degree of crystallinity. The topotactic anion exchange of the phosphate groups by phenylphosphonate groups could be performed to completion when performed in molten phenylphosphonic acid. Characterization of both the final products as well as the individual steps in the anion exchange were performed by powder XRD, fast neutron activation analysis, TGA, FTIR spectroscopy, TEM, solid-state NMR and XPS.