RAFM钢TIG焊和电子束焊疲劳性能实验和分析模拟

利用ANSYS 对低活化铁素体马氏体(RAFM)钢进行非熔化极气体保护焊(TIG 焊)与电子束焊的抗疲劳模拟分析，再利用SDS200 电液伺服疲劳试验机对TIG 焊和电子束焊的两种RAFM 钢试件进行实验。通过施加相同梯度负荷对TIG 焊和电子束焊试件进行焊缝的疲劳性能实验。与实验结果对比分析，结果显示电子束焊优于 TIG 焊，但在一定负载下可以用TIG 焊代替电子束焊。     

MgH2-MoS2-PP复合材料的储氢性能

通过球磨法制备了MgH₂-MoS₂-PP（PP=热解聚苯胺,w_MoS2=w_PP=8.33%）复合材料。与纯MgH₂对比研究发现,复合材料的初始放氢温度从650 K下降到550 K,并且在573 K下,75 min内的放氢量从0.38%（w/w,下同）提高到2.36%。在423 K下,放氢后产物可在40 min内吸氢2.45%,比纯MgH₂高出2.13倍。放氢反应的活化能比纯MgH₂（101.83 kJ·mol^-1）降低了28.81 kJ·mol^-1。MgH₂-MoS₂-PP复合材料的性能提高是由于PP能够均匀地减小Mg颗粒尺寸,并提高MoS₂在体系放氢与再吸氢过程中的催化效率。     

MgH2-MoS2-PP复合材料的储氢性能

通过球磨法制备了MgH₂-MoS₂-PP（PP=热解聚苯胺,w_MOS2=w_PP=8.33%）复合材料。与纯MgH₂对比研究发现,复合材料的初始放氢温度从650 K下降到550 K,并且在573 K下,75 min内的放氢量从0.38%（w/w,下同）提高到2.36%。在423 K下,放氢后产物可在40 min内吸氢2.45%,比纯MgH₂高出2.13倍。放氢反应的活化能比纯MgH₂（101.83 kJ·mol^-1）降低了28.81 kJ·mol^-1。MgH₂-MoS₂-PP复合材料的性能提高是由于PP能够均匀地减小Mg颗粒尺寸,并提高MoS₂在体系放氢与再吸氢过程中的催化效率。     

基于CETOL平台的中国聚变工程实验堆真空室三维公差分析

The tolerance analysis of China Fusion Engineering Test Reactor vacuum vessel is performed using the CETOL tolerance analysis software based on the CATIA platform. Based on the three-dimensional solid model, the assembled targets of the vacuum vessel are simplified and subdivided. Tolerances are assigned according to the overall assembly requirements of the vacuum vessel, and tolerance analysis models are established. The critical dimensions affecting the target tolerances have been determined through the sensitivity and contribution, and the unreasonable tolerances have been redistributed to meet the tolerance requirements of the component, which is very useful to ensure the assembly quality of the vacuum vessel.