第一性原理研究In,N共掺杂SnO2材料的光电性质

采用全电势线性缀加平面波(FP-LAPW)的方法,基于密度泛函理论第一性原理结合广义梯度近似(GGA),运用Wien2k软件计算了In, N两种元素共掺杂SnO₂材料的电子态密度和光学性质. 研究表明,共掺杂结构在自旋向下和向上两方向上都出现细的局域能级,两者态密度分布不对称;带隙内自旋向下方向上产生局域能级,共掺化合物表现出半金属性;能带结构显示两种共掺杂化合物仍为直接禁带半导体,价带顶随着N浓度的增加发生向低能方向移动,带隙明显增宽;共掺下的介电函数虚部主介电峰只在8.58 eV 关键词： 电子结构 态密度 能带结构 光学性质     

第一性原理研究Fe掺杂SnO2材料的光电性质

采用基于第一性原理的线性缀加平面波(FP-LAPW)方法,研究Fe掺杂SnO₂材料电子结构和光学性质,包括电子态密度、能带结构、介电函数和其他一些光学图谱. 研究结果表明,掺Fe后材料均属于直接跃迁半导体,且呈现半金属性;随掺杂浓度增加,费米能级进入价带,带隙逐渐减小,Fe原子之间耦合作用增强;通过掺杂能够在一定程度上改变成键性质,使其具有金属键性质. 光学谱线(吸收谱、消光系数等)与介电函数虚部谱线相对应,均发生蓝移,各峰值与电子跃迁吸收有关,从理论上指出光学性质和电子结构的内在联系. 关键词： 能带结构 态密度 光学性质 介电函数     

Spin—orbit stable dirac nodal line in monolayer B6O

The two-dimensional (2D) materials with nodal line band crossing have been attracting great research interest. However, it remains a challenge to find high-stable nodal line structure in 2D systems. Herein, based on the first-principles calculations and theoretical analysis, we propose that monolayer B₆O possesses symmetry protected Dirac nodal line (DNL) state, with its Fermi velocity of 10⁶ m/s in the same order of magnitude as that of graphene. The origin of DNL fermions is induced by coexistence of time-reversal symmetry and inversion symmetry. A two-band tight-binding model is further given to understand the mechanism of DNL. Considering its robustness against spin—orbit coupling (SOC) and high structural stability, these results suggest monolayer B₆O as a new platform for realizing future high-speed low-dissipation devices.     

N掺杂SnO2材料光电性质的第一性原理研究

采用全电势线性缀加平面波(full potential linearized augmented plane wave method,简记为FP-LAPW)方法,基于密度泛函理论第一性原理计算分析N掺杂SnO₂材料,研究了在N替代O原子和N替代Sn原子情况下的电子态密度、电荷密度分布以及光学性质.研究表明N掺杂替代Sn较之N掺杂替代O原子的带隙要宽,都宽于SnO₂的本征带隙,且两种情况下N分别处于负氧化态和正氧化态,其介电函数谱也与带隙对应发生蓝移,从理论上指出     

Electronic structures and magnetic properties in SmCo7-xMx

The electronic structures and magnetic properties of SmCo7 xMx (M=Ti, Si, Zr, Hf, Cu, B, Ag, Ga, Mn) compounds are investigated by using a spin-polarized MS-X.α method. The results show that the long-range ferromagnetic order is determined by a stronger 3d-5d interaction, rather than the traditional RKKY interaction, and the effects of doping element M on 3d-5d coupling are negligible in Sm-Co-based compounds. The nonmagnetic dopant Si atoms have a larger effect on the moments of 2e site although they preferably occupy the Co 3g sites, which results in the stronger uniaxial anisotropy of this compound. Analysis of the formation energies indicates that 5d-element doped compounds are more stable than other dopants, and furthermore, they have a higher Curie temperature above room temperature, which will be in favor of their potential application as high-temperature permanent magnets.     

Confirmation on origin of primary electron in solid state cathodoluminescence

This paper utilizes the brightness-voltage waveform curve to investigate the primary electron in solid state cathodoluminescence. The results indicate that the primary electron is from the interface state of SiO₂/MEH-PPV (Poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) under the lower electric field which contributes to the 580-nm emission. With increasing the electric field, the 405-nm emission is obtained, and under this condition, the origin of the primary electron is mainly from tunneling.     

High-temperature nodal ring semimetal in two-dimensional honeycomb-kagome Mn2N3 lattice

The search for two-dimensional (2D) nodal ring semimetallic materials is a current research hotspot in spintronics, and designing a 2D nodal ring (NR) material with high Curie temperature ($T_{\mathrm{C}})$ and strong robustness to spin-orbit coupling (SOC) is an even greater challenge. Here, based on the first-principles calculations and symmetry analysis, we predict that 2D Mn$_{2}$N$_{3}$ is a nodal ring semimetal (NRSM) with three energy bands near the Fermi energy level consisting of electrons in the same spin channel. An electron-like energy band and two hole-like energy bands near the Fermi plane cross to form two NRs centered at the point $\varGamma $. Symmetry analysis shows that the spin-polarized NR semimetal is robust to SOC due to the conservation of horizontal mirror symmetry. Monte-Carlo simulations further demonstrate that the $T_{\mathrm{C}}$ of the 2D Mn$_{2}$N$_{3}$ reaches 530 K, well above the room temperature. Notably, the 2D Mn$_{2}$N$_{3}$ remains an NRSM on h-BN substrate. Our results not only reveal a general framework for designing 2D NR materials, but also promote further research in the direction of multifunctional quantum devices for spintronics.     

钽掺杂对钛酸钡导热性能影响的研究

利用光热检测技术测量了钛酸钡材料的导热性能，得到了不同成型压力、烧结温度以及不同 掺杂量下的钛酸钡材料的热扩散率.研究了钽掺杂对钛酸钡材料导热性能的影响，发现了钽 元素掺杂量小于1.5mol%时，钛酸钡材料的热扩散率随掺杂量的增加而增大，当钽元素掺杂 量大于1.5mol%时，热扩散率随掺杂量的增加而减少.对钛酸钡材料的导热性能做了进一步的 分析. 关键词： 光热检测 钛酸钡 导热性能 钽掺杂     

激光检测技术在纳米材料中的应用

介绍激光技术在检测纳米材料中的应用，给出了检测纳米材料热扩散率的一种方法，实验结果表明该方法与通常采用的检测手段相一致。     

采用激光光热透射技术测量材料的热扩散率

介绍利用激光光热透射技术测量材料热扩散率的方法，用该方法测量黄铜，纯铁、铝、纯铜及锗的热扩散率，其结果与能常采用的检测手段一致。