Improved performance of organic light-emitting diodes with dual electron transporting layers

In this study the performance of organic light-emitting diodes(OLEDs) are enhanced significantly,which is based on dual electron transporting layers(Bphen/CuPc).By adjusting the thicknesses of Bphen and CuPc,the maximal luminescence,the maximal current efficiency,and the maximal power efficiency of the device reach 17570 cd/m2 at 11 V,and 5.39 cd/A and 3.39 lm/W at 3.37 mA/cm2 respectively,which are enhanced approximately by 33.4%,39.3%,and 68.9%,respectively,compared with those of the device using Bphen only for an electron transporting layer.These results may provide some valuable references for improving the electron injection and the transportation of OLED.     

Improving efficiency of organic light-emitting devices by optimizing the LiF interlayer in the hole transport layer

The efficiency of organic light-emitting devices (OLEDs) based on N,N'-bis(1-naphthyl)-N,N'-diphenyl-N,1'-biphenyl-4,4'-diamine (NPB) (the hole transport layer) and tris(8-hydroxyquinoline) aluminum (Alq₃) (both emission and electron transport layers) is improved remarkably by inserting a LiF interlayer into the hole transport layer. This thin LiF interlayer can effectively influence electrical performance and significantly improve the current efficiency of the device. A device with an optimum LiF layer thickness at the optimum position in NPB exhibits a maximum current efficiency of 5.96 cd/A at 215.79 mA/cm², which is about 86% higher than that of an ordinary device (without a LiF interlayer, 3.2 cd/A). An explanation can be put forward that LiF in the NPB layer can block holes and balance the recombination of holes and electrons. The results may provide some valuable references for improving OLED current efficiency.     

微腔效应对顶发射串联蓝光有机电致发光器件性能的影响

相比于传统有机电致发光器件,串联有机电致发光器件的发光效率与寿命均得到明显提升.因此,深入研究微腔效应对顶发射串联有机电致发光器件性能的影响具有重要意义.本文以蓝光器件为例,通过光学仿真模拟与实际实验相结合的方法,研究了顶发射串联蓝光器件的光学性能与电学性能变化规律.具体实验为:分别制备了顶发射串联蓝光器件,使其两个发光层位置分别位于器件光学结构中的第一与第二反节点、第二与第三反节点、第三与第四反节点.分析并确定了顶发射串联蓝光器件的两个发光层位置分别位于第二反节点与第三反节点处时,器件性能较佳.即:当器件电流密度为15 mA/cm^2时,器件电流效率为10.68 cd/A(色坐标CIEx,y=0.14,0.05),其亮度衰减到95%所需时间为1091.55 h.可能原因是:器件腔长较长时,既可以改善第一发光单元的空穴与电子平衡度、削弱表面等离激元效应,降低膜厚波动性对器件腔长的影响性;又可以在一定程度内起到包裹Partical的作用,提高效率,延长寿命.这一研究成果为设计高效率、长寿命的顶发射串联器件提供了重要依据.     

Efficiency of a blue organic light-emitting diode enhanced by inserting charge control layers into the emission region

We demonstrate high current efficiency of a blue fluorescent organic light-emitting diode (OLED) by using the charge control layers (CCLs) based on Alq3 . The CCLs that are inserted into the emitting layers (EMLs) could impede the hole injection and facilitate the electron transport, which can improve the carrier balance and further expand the exciton generation region. The maximal current efficiency of the optimal device is 5.89 cd/A at 1.81 mA/cm2 , which is about 2.19 times higher than that of the control device (CD) without the CCL, and the maximal luminance is 19.660 cd/m2 at 12V. The device shows a good color stability though the green light emitting material Alq3 is introduced as the CCL in the EML, but it has a poor lifetime due to the formation of cationic Alq3 species.     

Low driving voltage in an organic light-emitting diode using MoO3/NPB multiple quantum well structure in a hole transport layer

The driving voltage of an organic light-emitting diode(OLED) is lowered by employing molybdenum trioxide(MoO3)/N,N’-bis(naphthalene-1-yl)-N,N’-bis(phe-nyl)-benzidine(NPB) multiple quantum well(MQW) structure in the hole transport layer.For the device with double quantum well(DQW) structure of ITO/[MoO3(2.5 nm)/NPB(20 nm)]2/Alq3(50 nm)/LiF(0.8 nm)/Al(120 nm)],the turn-on voltage is reduced to 2.8 V,which is lowered by 0.4 V compared with that of the control device(without MQW structures),and the driving voltage is 5.6 V,which is reduced by 1 V compared with that of the control device at the 1000 cd/m2.In this work,the enhancement of the injection and transport ability for holes could reduce the driving voltage for the device with MQW structure,which is attributed not only to the reduced energy barrier between ITO and NPB,but also to the forming charge transfer complex between MoO3 and NPB induced by the interfacial doping effect of MoO3.     

Highly efficient blue fluorescent OLEDs with doped double emitting layers based on p—n heterojunctions

We fabricate a kind of novel efficient blue fluorescent organic light emitting device(OLED) based on p-n heterojunctions composed of hole transporting layer(HTL) N,N ’-bis(naphthalen-1-yl)-N,N ’-bis(phenyl)-benzidine(NPB) and electron transporting layer(ETL) 4,7-diphnenyl-1,10-phenanthroline(BPhen),into which a new blue material,DNCA(a derivation of N 6,N 6,N 12,N 12-tetrap-tolylchrysene-6,12-diamine),is partially doped simultaneously,and double emitting layers are configured.With a turn-on voltage of 2.6 V at 1 cd/m 2,this type of OLED presents a maximum luminance efficiency(η max) of 8.83 cd/A at 5.818 mA/cm 2 and a maximum luminance of over 40000 cd/m 2.Meanwhile,the Commission Internationale De L’Eclairage(CIE) coordinates of this device change slightly from(0.13,0.27) to(0.13,0.23) as the driving voltage increases from 3 V to 11 V.This improvement in the electroluminescent characteristics is attributed mainly to the ideal p-n heterojunction which can confine and distribute excitons evenly on two sides of the heterojunction interface so as to improve the carrier combination rate and expand the light-emitting region.