半导体开关单次超限工作研究

对半导体开关在这种超限条件下的单次使用情况进行了研究,尤其对级联状态多次试验。试验结果显示,额定电流为30mA的半导体开关可以实现单次放电电流达到10kA的稳定放电。通过对放电过程进行分析发现,开关从导通至最终损坏经过了一个比较复杂的物理过程,电路拓扑结构及其开关安装位置都将会对输出性能产生影响。     

Diode pumped injection seeded Nd:YAG laser

Diode pumped, injection seeded single-longitudinal-mode (SLM) Nd:YAG laser is achieved through buildup time minimizing technique in Q-switching operation. Pulses with energy of 20 mJ are obtained at a repetition rate of 100 Hz. Mx2 and My2 are 1.41 and 1.38, respectively.     

A Compact Diode-Pumped Injection Seeded Nd：YAG Laser with Resonance-Detection Technique

A diode pumped injection seeded single-longit udinal-mode （SLM） Nd： YA G laser is achieved by using the resonancedetection technique in Q-switching operation. The pulsed oscillator laser uses a folded cavity to achieve compact construction. This system operates at 100 Hz and provides over 20 m J/pulse of single-frequency 1064 nm output. The M2 values of horizontal and vertical axes are 1.58 and 1.41, respectively. The probability of putting out single-longitudinal-mode pulses is 100%. The 355 nm laser output produced by frequency tripling has a linewidth less than 200 MHz. The laser can run over eight hours continually without, mode hopping     

Conductively cooled all-solid-state zigzag slab laser

A diode pumped, Q-switched Nd：YAG zigzag slab laser is developed using passive conduction cooling. Flat-flat and unstable resonators are adopted in this experiment. The 150-mJ multi-mode and 100-mJ single-mode laser outputs with pulse width of 10 ns are achieved, corresponding to optical efficiencies of 19% and 13%, respectively. The experimental result demonstrates that the laser has the property of compact structure, high efficiency, reliability, and high beam quality. The design of laser has a potential application in space environment.     

锯齿形板条抽运结构的热效应数值比较

激光二极管抽运的全固态激光器中,除了激光介质的温度分布和热透镜效应以外,抽运、冷却结构对获得高光束质量、高功率激光输出至关重要。基于热传导方程,在相同的抽运功率和传导冷却边界条件下,对单侧面抽运锯齿形(zigzag)板条、单侧面键合锯齿形板条、部分抽运板条三种不同抽运结构的温度分布、热致应力、温度导致的折射率变化进行了详细的分析,并通过光线追迹方法,比较了光束在锯齿形面内和垂直于锯齿形面内的光程差,由光程差曲线分析了激光束的热透镜效应。对三种抽运结构的端面温度、端面变形和端面变形导致的光程差也进行了对比分析。结果表明,三种抽运结构在锯齿形面内的光束均表现为发散特性,在垂直于锯齿形面内的光束表现为热聚焦效应,温度导致的热聚焦特性相差不是很大。而在消除端面效应方面,键合激光板条具有明显优势。最后,提出了热透镜效应的补偿方法。     

空间用调Q偏振耦合输出棱镜谐振腔特性分析

为了优化棱镜谐振腔在调Q状态下的运转特性,充分利用琼斯矩阵光学分析棱镜谐振腔的特性,在不同材料棱镜情况下,比较了可变输出耦合率、泡克耳斯盒的消光比以及输出耦合率的调节.得到泡克耳斯盒在四分之一波长电压下能够得到比半波长电压更高的消光比,从而更适合在调Q工作状态下工作.     

All solid-state, injection-seeded Tirsapphire ring laser

In this letter, we present an all solid-state, injection-seeded Ti:sapphire laser. The laser is pumped by a laser diode pumped frequency-doubled Nd:YAG laser, and injection-seeded by an external cavity laser diode with the wavelength between 770 and 780 nm. The single longitude mode and the doubling efficiency of the laser are obtained after injection seeding. The experimental setup and relative results are reported. It is a good candidate laser source for mobile differential absorption lidar (DIAL) system.