Allyl chloride/AlCl_3/ether cationic initiating systems for polymerization of 1,3-pentadiene

Various ethers were used to mediate the polymerizations of 1,3-pentadiene (PD) initiated by AlCl3 and by allyl chloride (AllyCl)/AlCl3. The introduction of the ethers exert considerable effects on polymer yield and molecular weight due to its interaction with the propagating carbocation. The carbocation reactivity is reduced by this interaction which is subject to the ether's nucleophilicity determined by the steric hindrance of groups adjacent to oxygen. The reduction of carbocation reactivity gives rise to a decrease of polymer yield owing to inhibition of propagation but results in an augmentation of molecular weight due to suppression of various side reactions such as terminations. By using suitably nucleophilic ethers such as diphenyl ether, the polymerization can be mediated to give an high molecular weight polymer in high yield.     

一种新的长余辉阴极射线磷光体-SrAl2O4:Dy3+

本文介绍了一种新合成的长余辉阴极射线磷光体--SrAl2O4:Dy3+.在室温下,用10kv、1μA/cm2阴极射线激发磷光体时,其发射光谱由三组分立的锐线构成,系属Dy3+离子4f-4f跃迁的特征发射;发光呈黄白色,发光亮度可以同商用MgF2,Mn2+(P33)相比较,大约为Zn2SiO4:Mn2+、As(P39)亮度的60%.当阴极射线激发去除以后,磷光体的发光强度衰减到起始值的1/10的时间(通称余辉时间)长达200ms以上.发光衰减是非指数式的.阴极射线激发以后的热释发光表明:在磷光体中存在着构成慢衰减过程的深陷阱. 最后,根据实验结果,提出了这种磷光体发光衰减过程的物理模型.     

钡钇氟化物中Eu2+离子的激发光谱和发射光谱

在298和77K下分别研究BaYF5(BaF2·YF3)中Eu2+的激发和发射光谱。Eu2+的发射光谱中,除了一个属5d-4f跃迁的宽发射带外,还有一组6PJ→8S7/2的4f-4f跃迁窄谱线发射。它们的发射强度与Eu2+的浓度和温度有关。由於Eu2+从4f7基态跃迁到4f65d1态产生两个宽的激发带,4f65d(eg)和4f65d(t2g)。实验证实,Eu2+的6PJ→8S7/2的窄谱线发射主要来自高能级的t2g激发能弛豫的结果。     

对一道推理题解法的探究

题目有12只乒乓球,其中有一个不合格,它的重量略轻于其它几只,请你用天平称三次,找出这只不合格的乒乓球.请设计一种方案.(北京市九年义务教材·实验中·49页)     

不同pH条件下木质素磺酸钠的静电逐层自组装研究

以来源于造纸废液中的木质素磺酸钠(SL)为研究对象,利用静电逐层自组装技术,与聚二烯丙基二甲基氯化铵(PDAC)交替吸附,制备木质素磺酸钠的自组装多层吸附膜.研究了不同pH值条件下木质素磺酸钠在固体表面的静电吸附规律.木质素磺酸钠的自组装过程用紫外-可见光吸收光谱来监控,而自组装膜的表面形貌用原子力显微镜来观察.研究表明,SL与PDAC多层吸附膜的紫外-可见光吸收光谱强度随层数增加而线性增长,说明SL/PDAC多层吸附膜的厚度增长是以逐层自组装的方式进行的.木质素磺酸钠浸渍溶液的pH值对多层吸附膜的厚度和表面形貌产生重要的影响.在所研究的pH范围内,pH值越低,越有利于生成吸光度高的自组装膜,而得到的自组装膜的表面粗糙度越大。     

YAG基质中Ce对Tb3+离子发光特性的影响

实验中发现,在YAG:Tb中加入痕量Ce后,可以使Tb3+离子5D4→7F跃迁显著增强,因而,改变了发射光谱的能量分布,提高了发光亮度,改善了电流和电压特性,揭示了改进和提高商用P53磷光体发光特性的可能性。实验表明,这种增强作用是由于Ce3+→Tb3+离子的能量传递所致。讨论了Ce3+→Tb3+能量传递机理,分析了传递过程。     

块体非晶合金的韧塑化

块体非晶合金因其独特的原子结构而具有许多优异的力学性能,成为近年来材料领域的研究热点之一,但是由于其在变形过程中的室温脆性和应变软化等关键问题一直制约着其实际工程应用.为解决此问题,块体非晶合金领域的研究者们提出了多种方案,包括通过在非晶合金中调控其内禀特性如弹性常数、结构不均匀性,通过外加手段改变其应力及缺陷状态,通过外加和内生的方法在非晶基体中引入晶态增强相等方式,获得了一系列力学性能优异的块体非晶合金及其复合材料.特别是利用"相变诱导塑性"(transformation-induced plasticity,TRIP)概念研制出的块体非晶合金复合材料,同时具有大的拉伸塑性和加工硬化能力.本文围绕块体非晶合金的韧塑化这个关键科学问题,对单相非晶及非晶复合材料的韧塑化方案及机理进行了综述,着重介绍了TRIP韧塑化块体非晶合金复合材料的制备、性能、组织调控及韧塑化机理等,并对此领域的未来发展进行了展望.     

Nickel-disilicide-assisted excimer laser crystallization of amorphous silicon

Polycrystalline silicon (poly-Si) thin film has been prepared by means of nickel-disilicide (NiSi多晶硅 受激准分子激光器结晶 结晶化 界面晶粒生长polycrystalline silicon, excimer laser crystallization,Ni-disilicide, Ni-metal-induced lateral crystallization, two-interface grain growthProject supported by the National High Technology Development Program of China (Grant No 2002AA303250) and by the National Natural Science Foundation of China (Grant No 60576056).9/7/2005 12:00:00 AM3/6/2006 12:00:00 AMPolycrystalline silicon （poly-Si） thin film has been prepared by means of nickel-disilicide （NiSi2） assisted excimer laser crystallization （ELC）. The process to prepare a sample includes two steps. One step consists of the formation of NiSi2 precipitates by heat-treating the dehydrogenated amorphous silicon （a-Si） coated with a thin layer of Ni. And the other step consists of the formation of poly-Si grains by means of ELC. According to the test results of scanning electron microscopy （SEM）, another grain growth model named two-interface grain growth has been proposed to contrast with the conventional Ni-metal-induced lateral crystallization （Ni-MILC） model and the ELC model. That is, an additional grain growth interface other than that in conventional ELC is formed, which consists of NiSi2 precipitates and a-Si. The processes for grain growth according to various excimer laser energy densities delivered to the a-Si film have been discussed. It is discovered that grains with needle shape and most of a uniform orientation are formed which grow up with NiSi2 precipitates as seeds. The reason for the formation of such grains which are different from that of Ni-MILC without migration of Ni atoms is not clear. Our model and analysis point out a method to prepare grains with needle shape and mostly of a uniform orientation. If such grains are utilized to make thin-film transistor, its characteristics may be improved.