二维随机体系中长寿命模的研究

用时域有限差分法求解Maxwell方程,数值研究了TM模在二维随机散射体系中传输,通过傅里叶变换得到不同几何参量和光学参量的散射体系内长寿命模的频谱。计算得出宽带脉冲源激励随机散射体系后,存在于随机体系中的长寿命模频谱以分立频率窗口的形式存在。建立了用以解释长寿命模以分立频率窗口存在的物理模型,该模型与数值研究结果吻合较好,论证了存在于随机散射体系中长寿命模的形成机制与传统光学谐振腔内冷腔模形成机制的相似性。     

铝合金焊前激光清洗的等离子体光谱在线检测

铝合金焊接技术在工业生产、制造和维修等领域有广泛的应用,焊缝内存在气孔导致焊接质量降低是铝合金焊接技术的常见问题。由于铝合金表面金属氧化物是导致气孔生成的主要来源,对激光清洗过程进行在线检测,不但可以实时分析表面氧化物的清洗状态,而且可以避免基体表面因为过度清洗造成损伤或二次氧化。提出采用激光诱导等离子体光谱(LIBS)在线检测铝合金焊前激光清洗过程,表征清洗后铝合金基体的表面状态。LIBS技术可以对多元素成分同时检测,拥有较低的检出限和较高的准确性。搭建基于Andor Mechelle 5000光谱仪的铝合金焊前激光清洗在线检测系统,剔除空气环境对实验结果的影响,测试6061铝合金表面氧化物和铝合金基体的LIBS光谱,分析两者独特的元素特征谱线,采用X射线能谱(EDS)测试结果验证元素特征谱线的准确性,并探讨激光清洗过程LIBS技术在线检测的可行性。实验测试等离子体光谱谱线强度与激光能量密度之间的关系,获得单次脉冲激光去除铝合金表面氧化物的损伤阈值,结合X射线能谱的检测结果研究激光损伤阈值的成因及影响。研究激光清洗过程等离子体光谱特征谱线与脉冲次数之间的关系,提出基于O/Al特征谱线强度比值作为在线检测清洗效果及二次氧化损伤的评判依据。为验证该评判依据的准确性,将O/Al特征谱线强度比值随清洗次数的变化趋势与X射线能谱测试获得的氧元素原子百分比变化趋势进行对比。实验结果表明:采用200~700 nm范围内激光诱导等离子体谱线特征分析激光清洗状态,可以剔除空气环境的影响;氧元素和铝元素特征谱线准确反映出表面氧化膜与铝合金基体的成分差异;X射线能谱检测元素成分和含量表明氧元素含量随着激光清洗能量密度先减后增,单次清洗铝合金的二次氧化损伤的激光能量阈值为11.46 J·cm-2,小于损伤阈值的激光能量密度对铝合金基体的多次清洗未造成损伤,等离子体光谱特征谱线强度与表面清洗状态相关, 656.5 nm(OⅡ)/396.2 nm(AlⅠ)谱线强度比值≤1.5%为激光清洗干净的依据。研究结果有利于铝合金的激光清洗实时控制技术和焊接装置集成化。     

放大自发辐射对激光冲击处理7050铝合金的影响

 利用高功率钕玻璃激光器对7050铝合金表面进行了冲击处理,保持泵浦功率不变,用压电传感器和示波器测试了激光冲击产生的压力波形,用X射线应力测量仪测量了激光冲击后铝合金表面的残余应力,并用非接触式光学轮廓仪分析了激光冲击后铝合金的表面形貌,研究了放大自发辐射强度对激光冲击处理7050铝合金冲击压力、残余应力和粗糙度影响的微观机理。研究结果表明:在泵浦功率不变前提下,放大自发辐射强度的增大降低了激光冲击波压力,铝合金表面残余压应力也随之降低,同时铝合金表面粗糙度增大。     

Verification and Application of the Border Effect in Precision Measurement

Detection resolution is crucial for improvement of the measurement precision in the device and instrument. Because of the limited resolution, a fuzzy area with the truth-value as its center is found during the detection. The finding for improving the measurement precision by the border of fuzzy area is first introduced. The higher resolution can be captured by the higher resolution stability which makes the different detection results of the inner and outer fuzzy area on the border reflected more sensitively between the measure and the reference quantity. The system resolution obtained only depends on the stability of measurement resolution, which is much better than the mea~surement resolution itself. Based on the finding, the measurement precision can be improved two or three orders of magnitude. The finding can be used in various kinds of high precision measurement.     

Research and application of regular phenomenon between periodic signals

The phase change between periodic signals is regular. Research on the regular phenomenon between periodic signals is helpful to improve the precision of some measurements and develop some new measurement methods. So it is necessary to analyze the characteristics of the greatest common factor frequency and the least common multiple period universally existing in periodic signals. The regulation of the quantitative phase shift resolution between periodic signals is presented.The cause of difference in phase characteristics between periodic signals is explained well. In this paper we propose different application prospects based on the regular phenomenon between periodic signals, with focusing on the methods for high precision frequency measurement and transient stability measurement. The experimental results are satisfactory.     

Nd3+螯合物的含氢有机溶液光谱性能研究

研究了Nd(TTA)₃螯合物溶于二甲基甲酰胺溶剂的光谱性质，溶液中所有氢未置换为氘.测量了这种溶液体系的吸收谱、荧光谱和荧光寿命.在898和1058 nm波长处观察到明显的Nd³⁺荧光特征峰.用Judd-Ofelt理论对吸收谱进行分析计算，得到了三个强度参数Ω_t(t=2,4,6)分别为Ω₂=4.9×10^-20 cm², Ω₄=5.1×10^-20 cm²和Ω₆=2.5×10^-20 cm².利用强度参数计算了⁴F_3/2能级与⁴I_9/2和⁴I_11/2之间的跃迁强度S_ed、自发辐射系数A_ed以及荧光分支比β等，估算了⁴F_3/2能级的辐射跃迁寿命τ_r＝682 μs.实测1058和898 nm波长处荧光寿命τ大约为460和505 μs，因此荧光量子效率分别高达0.67和0.74.荧光量子效率高表明Nd³⁺在这种溶液中无辐射跃迁比较弱；强度参数Ω₂比较大，表明Nd³⁺在溶液中具有不对称配位场环境，不对称的配位场环境可大大促进Nd³⁺吸收激发能量.光谱质量因子Ω₄/Ω₆>1，使得898 nm的辐射强于1058 nm的辐射. 关键词： Nd 有机溶液 光谱性能 Judd-Ofelt理论     

Design and analysis of a kind of large flattened mode optical fibre

In this paper, a refractive index profile design enabling us to obtain a flat modal field around the fibre centre is investigated. The theoretical approach for designing such multilayer large flattened mode (LFM) optical fibres is presented. A comparison is made between the properties of a three-layer LFM structure and a standard step-index profile with the same core size. The obtained results indicate that the effective area of the LFM fibre is about twice as large as that of the standard step-index fibre, but the LFM fibre has less effective ability to filter out the higher order modes than the standard step-index fibre with the same bending radius.     

Study of the substructure in nanometer copper thin films treated by laser shock processing

We study nanometer copper thin films prepared by magnetron sputtering and treated with laser shock processing (LSP). We observe the formation of firstborn twin crystals and some complete twin crystals in the copper thin films. After LSP, scanning electron microscope (SEM) images show obvious plastic deformation of the copper grain on the film surface, dramatically increased grain size, and the appearance of a large number of twin crystals. Moreover, the width of the crystals is a few dozen nanometers, and the cross angle is more than or close to 90°.Many vacancy defects appear during the sliding of atomic plane, which leads to a faulty structure; however, no obvious dislocation is observed. These substructures play a significant role in improving the mechanical performance of nanometer copper thin films.     

光通过纳米颗粒随机散射体透射光强的计算及分析

光通过随机散射体后透射光强的估算,对于提取散射体内部无法直接测量或者无法直接观察的信息至关重要。在分析平行光束通过纳米圆形颗粒随机散射体出射面上光强组成的基础上推导了透射光强的计算公式,并指出多重散射理论、一阶多重散射理论和朗伯-比尔定律在一定近似程度上可以相对精确地估算透射光强。这三种方法的估算结果之间会出现四种相对关系。根据这些相对关系,分析了光在散射体内部传输时散射过程的特征以及各种散射过程对出射面光强的贡献大小。