An Efficient Photon Conversion Efficiency Ammonia Terahertz Cavity Laser

An efficient ammonia terahertz （THz） cavity laser is reported experimentally. Unlike the past design schemes such as hole couplers and freestanding mesh couplers, in our systems the input and output couplers are fabricated by depositing nickel capacitive metallic meshes on ZnSe and high-resistivity silicon substrates. Thus the couplers not only can be constructed as an F-P oscillator but also can be used as sealed windows that are easier to perform the adjustment of alignment with. To enhanceTHz laser output energy and photon conversion efficiency, the dominant factors such as pump intensity and gas pressure are investigated experimentally. Finally, a 1.35mJ terahertz radiation of ammonia laser with 90μm wavelength （3.33THz） operating at 1.09kPa pumped by a 402mJ TEA CO2 laser with 9R （16） line is generated, and photon conversion efficiencies of 6.5% are achieved.     

基于光放大的长脉冲抽运太赫兹激光

为了获得较窄增益带宽、较大光强的太赫兹辐射,尝试了利用TEA CO₂激光器对6 W可调谐连续波CO₂种子激光实行双程光放大实验,以期望获得长脉冲、高峰值功率的抽运光.通过实验,获得了大约30倍的放大系数,放大光输出功率随种子光注入功率的增加而增加,其中10 P （20）支线表现更加突出,并且被放大的激光支线半峰全宽在14 μs左右.基于这种长脉冲抽运源,建立了一种产生脉冲太赫兹的动力学模型,给出了产生太赫兹辐射的饱和抽运光强表达式,确定了抽运光的光强范围.另外, 关键词： 激光物理 长脉冲 动力学模型 太赫兹激光     

Transmittance investigation on capacitive mesh on thick dielectric substrates as output windows for optically pumped terahertz lasers

This paper reports that an output window for optically pumped terahertz (THz) laser has been fabricated by depositing a capacitive nickel-mesh on a thick high-resistivity silicon substrate (approximating to 5 mm thick).Unlike the conventional process of depositing a gold film approximating to 100 nm on negative photoresist using electron-beam evaporation,a nickel film approximating to 1.5 μm thick is directly deposited on the clean surface of dielectric substrate using magnetron sputtering and then a positive photoresist is spun onto the nickel metal surface at 6000 r for 60 s.A transmittance spectrum of the output window in a certain frequency range (say,from zero to 1 THz) has been obtained by using THz time domain spectroscopy.Moreover a transmittance spectrum simulated numerically has also been estimated with respect to the output window using the transmission-line model (TLM) containing attenuation component from dielectric substrate.The simulation results show that the TLM can explain well the experimental curve in a certain frequency range from zero to 1 THz.Thus it is demonstrated that the improved optical component can be efficiently used as both output coupler and output window for optically pumped THz lasers.