Improving the impact property and heat‐resistance of PLA/PC blends through coupling molecular chains at the interface

The influences of both the molecular structure and the melt viscosity differences between Poly(lactic acid) (PLA) and polycarbonate (PC) on the interpenetration of molecular chains at the interface were investigated by comparing the dynamic mechanical properties and morphologies of the as‐prepared PLA/PC solution‐casting blends with those of their corresponding annealed (180°C, 8 h) samples or PLA/PC melt blends. Additionally, two chain extenders containing epoxy groups (ADR and TGDDM) were used to improve the interfacial strength. Subsequently, the interpenetration of PLA and PC molecular chains at the interface was also surveyed. Finally, the effects of the morphology formed by after adding ADR or TGDDM on the impact property, and heat resistance were discussed. The results showed that there was no interpenetration of molecular chains at the interface in PLA/PC melt blends because of the serious hindrance of the molecular structure and the melt viscosity differences. Although the interfacial strength achieved significant increase after adding ADR or TGDDM, the increase of the interfacial strength should be caused by the connection of ADR or TGDDM molecules with PLA and PC molecules at the interface through chemical bonds rather than the entanglements of PLA and PC molecular chains because of no interpenetration of PLA and PC molecular chains at the interface. Thus, the morphology formed after adding ADR or TGDDM is still the type of complete phase separation, which may be the most suitable morphology for achieving high impact and heat resistance PLA/PC blends because these two properties strongly depend on the crystallinity of PLA phase. Copyright © 2015 John Wiley & Sons, Ltd.     

在封闭结构中水对爆炸冲击波的削波、减压作用

采用数值方法计算了封闭矩形空间中布置在炸药周围的水对爆炸冲击波的削波作用以及对于气室压力的削减作用。计算结果显示 ,在各种不同的载荷密度和水 /药质量比参数条件下 ,冲击波峰值压力和气室压力均得到明显的削减。还计算了一个具有开口的模型隧道中水的削波作用 ,并将计算结果与实验测量数据进行了比较。     

Heterogeneous Heck Reaction in Microemulsion with Palladium Supported Na‐Y Zeolites as Catalyst

Heterogeneous Heck reaction catalyzed by Pd (NH₃)₄ ²⁺‐Na‐Y zeolite in the presence of K₂CO₃ as the base has been carried out in an oil‐in‐water microemulsion based on Triton X10 at 80°C.     

苯甲酰基的脱去

讨论了苯甲酰基的脱去方法，包括一些传统的脱苯甲酰基方法和新的方法、试剂。脱苯甲酰基方法在此粗分为四类，即酸催化水解法、碱催化水解法、选择性脱苯甲酰基法和其它特殊方法。参考文献48篇。     

生物可降解高吸水性非织造布的研制

用聚丙烯酸接枝淀粉浆液，在ＰＶＡ非织造布上形成吸水树脂，从而得到高吸水性非织造布。对接枝单体的比例、交联条件、浸轧量及非织造布规格等因素对高吸水非织造布吸水性能的影响进行了讨论了并测定了其生物降解性能。     

复旦大学的物理演示实验在创新中前进

介绍复旦大学物理演示实验室近年来在教学改革中的成果。     

Windows95环境中转速测量和直流电机转速控制方法

介绍在Windows95环境中用Visual Basic5.0编写转速测量和直流电机转速控制方法的过程。     

Fitting formula for the injection volume of a gas chromatograph for radio‐xenon sampling in the lower troposphere

GC is usually used for xenon concentration and radon removal in the International Monitoring System of the Comprehensive Nuclear‐Test‐Ban Treaty. In a gas chromatograph, the injection volume is defined to calculate the column capacity. In this paper, the injection volume was investigated and a fitting formula for the injection volume was derived and discussed subsequently. As a consequence, the xenon injection volume exponentially decreased with the column temperature increased, but exponentially increased as the flow rate increased.