污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能研究

亚甲基蓝和环丙沙星是水体中2种污染物, 对生态环境有潜在危害. 本文以市政剩余活性污泥为原料, 氯化锌为活化剂热解制备污泥基吸附剂, 研究盐酸酸洗浓度、氯化锌浓度、热解温度、热解时间等对污泥基吸附剂吸附水中亚甲基蓝和环丙沙星性能的影响. 结果表明 (1)污泥基吸附剂对亚甲基蓝的吸附性能随盐酸酸洗浓度的增大而增加, 对环丙沙星的吸附性能则随盐酸酸洗浓度的增大呈先降后增趋势, 两者均在1.500mol·L-1盐酸浓度下取得最优值. (2)污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能随氯化锌浓度和热解温度的增加呈先升后降趋势, 在氯化锌浓度为4.0mol·L-1、热解温度为500℃时有最优值; 随着热解时间的延长, 污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能分别在500℃热解70min和80min时有最优值. (3)污泥基吸附剂的最佳制备条件为 氯化锌4.0mol·L-1活化2h、500℃热解70min和80min、1.500mol·L-1盐酸酸洗; 以此制得的污泥基吸附剂对亚甲基蓝和环丙沙星的去除率分别为97.7%和96.4%, 平衡吸附量分别为97.9mg·g-1和3.9mg·g-1, 且污泥基吸附剂对亚甲基蓝和环丙沙星的吸附过程均符合准二级动力学方程.     

传输线方程的高精度龙格−库塔数值求解方法

提出了一种求解传输线方程的高精度龙格-库塔(RK)方法。此方法在空间上采取高阶泰勒展开,提高了对空间微分的近似精度,减少了数值色散所带来的误差。与传统的时域有限差分法(FDTD)方法相比,在每波长采样数相同时,RK方法的计算精度更高。同时,根据Taylor模型,对外界平面波激励源进行离散,成功利用RK方法对外部场激励传输线进行求解,扩大了龙格-库塔方法在求解传输线方程时的应用范围。通过编程对平面波辐照下无限大地平面上的单导体与双导体的算例分别应用FDTD方法与RK方法进行了计算,验证了RK方法的正确性。结果表明同等计算条件下RK方法的计算精度更高。     

Synthesis and Diverse Transformations of a Dinitrogen Dititanium Hydride Complex Bearing Rigid Acridane-Based PNP-Pincer Ligands

Studies on N₂ activation and transformation by transition metal hydride complexes are of particular interest and importance. The synthesis and diverse transformations of a dinitrogen dititanium hydride complex bearing the rigid acridane-based ^acriPNP-pincer ligands {[(^acriPNP)Ti]₂(μ₂-η¹:η²-N₂)(μ₂-H)₂} are presented. This complex enabled N₂ cleavage and hydrogenation even without additional H₂ or other reducing agents. Furthermore, diverse transformations of the N₂ unit with a variety of organometallic compounds such as ZnMe₂, MgMe₂, AlMe₃, B(C₆F₅)₃, PinBH, and PhSiH₃ have been well established at the rigid ^acriPNP-ligated dititanium framework, such as reversible bonding-mode change between the end-on and side-on/end-on fashions, diborylative N=N bond cleavage, the formal insertion of two dimethylaluminum species into the N=N bond, and the formal insertion of two silylene units into the N=N bond. This work has revealed many unprecedented aspects of dinitrogen reaction chemistry.     

Necessary and Sufficient Conditions for Qualitative Properties of Infinite Dimensional Linear Programming Problems

Necessary and sufficient conditions for qualitative properties of infinite dimensional linear programing problems such as solvability, duality, and complementary slackness conditions are studied in this article. As illustrations for the results, we investigate the parametric version of Gale’s example.     

Development and validation of a simple and sensitive high‐resolution LC/MS method for determination of PF‐04620110 in dog plasma: Application to a pharmacokinetic study

In this study, a more sensitive and reliable quantitative method based on ultra‐high performance liquid chromatography coupled with Q‐Exactive‐Orbitrap‐MS in full‐mass scan was developed and validated for the determination of PF‐04620110 in dog plasma. After protein precipitation with acetonitrile, the sample separations were carried out on an Acquity BEH C₁₈ column with 1 mm ammonium acetate in water and acetonitrile containing 0.1% acetic acid as mobile phase, at a flow rate of 0.4 mL/min. The assay showed excellent linearity over the concentration range of 1–2000 ng/mL with correlation coefficient >0.9980 (r > 0.9980). The LLOQ was 1 ng/mL. The inter‐ and intra‐day precision (RSD, %) was within 9.69% while the accuracy (RE, %) was in the range of ?8.59–11.24%. The extraction recovery was >85.37% and the assay was free of matrix effects. PF‐04620110 was demonstrated to be stable under various processing and handing conditions. The validated method was successfully applied to the pharmacokinetic study of PF‐04620110 in dogs and the results revealed that PF‐04620110 was slowly eliminated from plasma with a clearance of 60.81 ± 7.11 mL/h/kg for intravenous administration and 81.44 ± 25.79 mL/h/kg for oral administration. The oral bioavailability was determined to be 77.89% in dogs.     

Er3+单掺、Er3+/Yb3+共掺杂Ca12Al14O32F2的 制备及上转换发光性质

利用高温固相法成功制备了Er~(3+)单掺、Er~(3+)/Yb~(3+)共掺杂Ca_(12)Al_(14)O_(32)F_2上转换发光样品。在980 nm激光激发下,Er~(3+)单掺和Er~(3+)/Yb~(3+)共掺杂样品均呈现出较强的绿光(528,549 nm)和较弱的红光(655 nm)发射,分别归因于Er~(3+)离子的~2H_(11/2),~4S_(3/2)→~4I_(15/2)和~4F_(9/2)→~4I_(15/2)能级跃迁。随着Er离子浓度的增加,单掺杂样品上转换发光强度先增大后减小,最佳掺杂浓度为0.8%。共掺杂Yb~(3+)后,Er~(3+)的发光强度明显增大。还原气氛下合成的样品上转换发光强度增大约两倍,可能和笼中阴离子基团变化有关。发光强度和激发光功率的关系表明所得上转换发射为双光子吸收过程,借助Er~(3+)-Yb~(3+)体系能级结构详细讨论了上转换发射的跃迁机制。     

MAO‐free and extremely active catalytic system for ethylene tetramerization

The original Sasol catalytic system for ethylene tetramerization is composed of a Cr source, a PNP ligand, and MAO (methylaluminoxane). The use of expensive MAO in excess has been a critical concern in commercial operation. Many efforts have been made to replace MAO with non‐coordinating anions (e.g., [B(C₆F₅)₄]^?); however, most of such attempts were unsuccessful. Herein, an extremely active catalytic system that avoids the use of MAO is presented. The successive addition of two equivalent [H(OEt₂)₂]⁺[B(C₆F₅)₄]^? and one equivalent CrCl₃(THF)₃ to (acac)AlEt₂ and subsequent treatment with a PNP ligand [CH₃(CH₂)₁₆]₂C(H)N(PPh₂)₂ ( 1 ) yielded a complex presumably formulated as [ 1 ‐CrAl (acac)Cl₃(THF)]²⁺[B(C₆F₅)₄]^?₂, which exhibited high activity when combined with iBu₃Al (1120 kg/g‐Cr/h; ~4 times that of the original Sasol system composed of Cr (acac)₃, iPrN(PPh₂)₂, and MAO). Via the introduction of bulky trialkylsilyl substituents such as –SiMe₃, –Si(nBu)₃, or –SiMe₂(CH₂)₇CH₃ at the para‐position of phenyl groups in 1 (i.e., by using [CH₃(CH₂)₁₆]₂C(H)N[P(C₆H₄‐p‐SiR₃)₂]₂ instead of 1 ), the activities were dramatically improved, i.e., tripled (2960–3340 kg/g‐Cr/h; more than 10 times that of the original Sasol system). The generation of significantly less PE (<0.2 wt%) even at a high temperature is another advantage achieved by the introduction of bulky trialkylsilyl substituents. NMR studies and DFT calculations suggest that increase of the steric bulkiness on the alkyl‐N and P‐aryl moieties restrict the free rotation around (alkyl)N–P (aryl) bonds, which may cause the generation of more robust active species in higher proportion, leading to extremely high activity along with the generation of a smaller amount of PE.