On the balanced domination of graphs

Czechoslovak Mathematical Journal - Let G = (VG,EG) be a graph and let NG[υ] denote the closed neighbourhood of a vertex υ in G. A function f: VG ? {?1,0,1} is said to be a...     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

Low Bandgap 2D Perovskite Single Crystal with Anomalous-large Charges/ions Collection Ratio for Ultra-sensitive and Stable X-ray Detectors

The low-dimensional halide perovskites have attracted increasing attention due to their improved moisture stability, reduced defects, and suppressed ions migration in many optoelectronic devices such as solar cells, light-emitting diodes, X-ray detectors, and so on. However, they are still limited by their large band gap and short charge carriers’ diffusion length. Here, we demonstrate that the introduction of metal ions into organic interlayers of two-dimensional (2D) perovskite by cross-linking the copper paddle-wheel cluster-based lead bromide ([Cu(O₂C−(CH₂)₃−NH₃)₂]PbBr₄) perovskite single crystals with coordination bonds can not only significantly reduce the perovskite band gap to 0.96 eV to boost the X-ray induced charge carriers, but can also selectively improve the charge carriers’ transport along the out-of-plane direction and blocking the ions motion paths. The [Cu(O₂C−(CH₂)₃−NH₃)₂]PbBr₄ single-crystal device can reach a record charges/ions collection ratio of 1.69×10¹⁸±4.7 % μGy_air⁻¹ s, and exhibit a large sensitivity of 1.14×10⁵±7% μC Gy_air⁻¹ cm⁻² with the lowest detectable dose rate of 56 nGy_air s⁻¹ under 120 keV X-rays irradiation. In addition, [Cu(O₂C−(CH₂)₃−NH₃)₂]PbBr₄ single-crystal detector exposed to the air without any encapsulation shows excellent X-ray imaging capability with long-term operational stability without any attenuation of 120 days.     

Multiplicative degree-Kirchhoff index and number of spanning trees of a zigzag polyhex nanotube TUHC[2n, 2]

Let L_n denote the linear hexagonal chain containing n hexagons. Then identifying the opposite lateral edges of L_n in ordered way yields TUHC[2n, 2] , the zigzag polyhex nanotube, whereas identifying those of L_n in reversed way yields M_n, the hexagonal Möbius chain. In this article, we first obtain the explicit formulae of the multiplicative degree-Kirchhoff index, the Kemeny's invariant, the total number of spanning trees of TUHC[2n, 2] , respectively. Then we show that the multiplicative degree-Kirchhoff index of TUHC[2n, 2] is approximately one-third of its Gutman index. Based on these obtained results we can at last get the corresponding results for M_n.     

磷酸修饰对纳米Fe2O3热稳定性及光催化性能的影响

通过溶液浸渍蒸干过程实现了磷酸对Fe₂O₃纳米粒子的表面修饰, 研究了磷酸修饰对纳米Fe₂O₃的热稳定性及光催化活性的影响. 结果表明, 磷酸修饰显著提高了Fe₂O₃的热稳定性, 主要归因于磷酸修饰在样品表面抑制了粒子之间的团聚生长. 同时, 在光催化降解气相乙醛和液相苯酚的测试中, 磷酸修饰后热处理温度为600 ℃的样品表现出了最佳的可见光催化性能, 这主要归因于该样品具有高晶化度、 小粒子尺寸及大比表面积, 并且适量的修饰有利于其光催化性能的提高.     

Adsorption Mechanism of Benzene Derivatives by Pagoda[n]arenes

Despite the widespread use in industrial production, benzene derivatives are harmful to both human beings and the environment. The control of these substances has become an important subject of scientific research. This study introduces a new approach for adsorption and separation of benzene derivatives utilizing pagoda[n]arene based supramolecular materials. Density functional theory calculations were employed to investigate the molecular recognition mechanism of benzene derivatives by pagoda[4]arenes and pagoda[5]arenes (Pa[4]As and Pa[5]As). Results indicate that Pa[4]As and Pa[5]As can effectively accommodate benzene derivatives through non-covalent interactions, leading to the formation of stable host-guest complexes. Additionally, molecular dynamics simulations revealed that both crystalline and non-crystalline supramolecular aggregates of Pa[4]As and Pa[5]As possess the ability to adsorb benzene derivatives and maintain the stability of the adsorption. Moreover, increasing the temperature causes benzene derivatives to desorb from the adsorbing aggregates, and thus the material can be reutilized.     

Addition reactions of fluoroalkanesulfonyl azides to [60] fullerene under thermal or microwave irradiation condition

The reactions of [60] fullerene with excess fluoroalkanesulfonyl azides R_fSO₂N₃ in o-dichlorobenzene under thermal or microwave irradiation condition afforded monoadduct opened [5,6]-bridged azafulleroids. While, similarly treatment of 2,2,2-trifluoroethyl azides CF₃CH₂N₃ with C₆₀ gave two monoadducts, i.e., opened [5,6]-bridged azafulleroids, closed [6,6]-bridged Aziridino-fullerene, and some multi-addition product. A general mechanism for these addition reactions was proposed.     

pH manipulation: a facile method for lowering oxidation state and keeping good yield of poly(m-phenylenediamine) and its powerful Ag+ adsorption ability

A method of pH manipulation has been used to improve chemically oxidative polymerization of m-phenylenediamine (mPD) through concurrent addition of NaOH when adding oxidant (NH(4))(2)S(2)O(8). pH detection and open-circuit potential technique were adopted to monitor the polymerization process of mPD and to explain the oxidation state-pH and yield-pH relationships. Results from Fourier transformed infrared (FTIR) and X-ray photoelectron (XPS) spectroscopies indicate that a low oxidation state is under control by regulating NaOH concentration. At 2.5 M NaOH, the oxidation state of poly(m-phenylenediamine) (PmPD) is 64.7 mol % (measured by molar content of quinoid imine from XPS), while the yield is 84%. The synthesized PmPD possesses better Ag(+) adsorption performance when lowering its oxidation state. Moreover, the Ag(+) adsorbance of PmPD can reach 1693 mg g(-1). Meanwhile, Ag(+) adsorption mechanism was studied by pH tracking, X-ray diffraction (XRD) patterns, and X-ray photoelectron spectroscopy. The adsorption process includes redox reaction, chelation, and physical adsorption.     

1+1>2: Fiber Synergy in Aggregation-Induced Emission

Mesoscopic aggregate is important to transfer or even amplify the molecular information in macroscopic materials. As an important branch of aggregate science, aggregation-induced emissive luminogens (AIEgens) often show slight or even no emission in solutions but exhibit bright emission when they aggregate, which open a new avenue for the practical applications. Due to the flexible and rotor structure of AIEgens, the aggregate structure of AIEgens is highly sensitive to the surrounding microenvironment, resulting in adjustable optical properties. Fibers integrated of a multiplicity of functional components are ideal carriers to control the aggregation processes, further assembly of fibers produces large-scale fabrics with amplified functions and practical values. In this Concept article, we focus on the latest advances on the synergy between “AIE+Fiber” for the boosted performance that beyond AIE, and their applications are presented and abstracted out to stimulate new ideas for developing “AIE+Fiber” systems.     

Reactions of fluoroalkanesulfonyl azides with pyrrole and its derivatives

The reactions of fluoroalkanesulfonyl azides with pyrrole and its derivatives were studied. The reaction proceeded smoothly under mild conditions to give the 3-(fluoroalkanesulfonamido) pyrroles in good yield. The electron donating groups on the pyrrole core accelerated the reaction, while the electron withdrawing groups decelerated it. All the products were fully characterized by spectrum methods, and one of the products was further confirmed by X-ray diffraction analysis. A possible reaction mechanism for these reactions was proposed.