Synthesis of novel organoselenium as catalyst for Baeyer-Villiger oxidation with 30% H2O2

A novel diselenide was synthesized in good yield via only four steps from phenol, and was employed as the catalyst for the Baeyer-Villiger oxidation with 30% H₂O₂ to obtain lactones in good yields.     

Synthesis,surface accumulation,and micellar properties of amphiphilic block copolymers

Amphiphilic block copolymers, i.e., poly(methyl methacrylate)-b-poly(2-dimethylethylammoniumethyl methacrylate), were synthesized by the reaction between two prepolymers. Carboxyl-terminated poly(methyl methacrylate) and hydroxyl-terminated poly(2-dimethylaminoethyl methacrylate) were prepared by radical polymerization of the corresponding monomers in the presence of thioglycolic acid and 2-mercaptoethanol as a chain transfer agent, respectively. Two condensation methods, i.e., DCC and the acid chloride method, were used for the reactions of these prepolymers. The subsequent quarternization produced the amphiphilic block copolymers. Surface property of poly(methyl methacrylate) films containing this amphiphilic block copolymer was examined by measuring contact angles for water. The addition of only 0.5 wt% of the block copolymer was sufficient to make poly(methyl methacrylate) surfaces hydrophilic. The block copolymer formed a polymeric micelle in acetone–water mixed solvent.     

Column chromatographic preconcentration of palladium with dimethyl glyoxime and acenaphthenequinone dioxime on naphthalene

A solid material consisting of dimethyl glyoxime (DMG), acenaphthenequinone dioxime (ANDO) or DMG-ANDO on naphthalene provides a very convenient, rapid and economical method for the preconcentration of palladium in synthetic samples. Pd-DMG, Pd-ANDO and Pd-DMG-ANDO are quantitatively retained on naphthalene in the column in the pH ranges 2.2–4.4, 1.8–5.6 and 1.7–6.8, respectively. The solid mixture consisting of the metal complex together with naphthalene is stripped from the column with 5 ml of dimethylformamide (DMF)-n-butylamine and the absorbance is measured at 247.6 nm with an atomic absorption spectrometer. Calibration graphs are linear over the palladium concentration range 5–25 μg per 5 ml of the final solution for all the three complexes. Ten replicate determinations of a sample solution containing 10 μg of palladium gave mean absorbances of 0.180, 0.225 and 0.230 with relative standard deviations of 1.8, 1.7 and 1.6% using the reagents DMg, ANDO and DMG-ANDO, respectively. The sensitivity of the method is better than the direct atomic absorption spectrometric determination of palladium. It is highest in case of the mixed ligands, i.e., DMG-ANDO (0.038 μg ml^?1 for 1% absorption). The method can be applied to the trace determination of palladium in complex materials.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Crystallization and polymorphic transition behavior of chloramphenicol palmitate in 2-hydroxypropyl-β-cyclodextrin matrix

Chloramphenicol palmitate (CPP) was converted to an amorphous complex when spray-dried with 2-hydroxypropyl--cyclodextrin (HP--CyD), and no crystallization of CPP was observed for at least 2 months under the storage condition of 50°C and 50% relative humidity. The dissolution rate of CPP/HP--CyD complex in aqueous HCO-60 solution was much faster than CPP polymorphs (complex > metastable forms (B and subB) > stable form (A)), which was reflected in thein-vivo absorption behavior of CPP following oral administration in dogs.     

Solvent extraction of permanganates (Na, K) by 18-crown-6 ether from water into 1,2-dichloroethane: elucidation of an extraction equilibrium based on component equilibria

Ion-pair formation constants (K_MLA mol⁻¹ dm³) of Na⁺– and K⁺–18-crown-6 ether (18C6) complexes with MnO₄⁻ in water (w) were determined potentiometrically at 25 °C. Simultaneously, extraction constants (K_ex mol⁻² dm⁶) of the permanganates with 18C6 from w into 1,2-dichloroethane at 25 °C were obtained from the spectrophotometric determination of distribution ratios of the permanganates. These K_ex values were divided into K_MLA and other three component equilibrium constants and thereby extraction-selectivity and -ability were discussed in comparison with corresponding metal picrate–18C6 extraction systems reported before.     

Three New Lanostane Triterpenoids from Inonotus obliquus

Three new lanostane‐type triterpenoids, inonotsulides A, B, and C ( 1 – 3 , resp.) were isolated from the sclerotia of Inonotus obliquus (Pers .: Fr.) (Japanese name: Kabanoanatake; Russian name: Chaga). Their structures were determined to be (20R,24S)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 1 ), (20R,24R)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 2 ), and (20R,24S)‐3β,25‐dihydroxylanosta‐7,9(11)‐dien‐20,24‐olide ( 3 ) on the basis of chemical transformation, NMR spectroscopy including 1D and 2D (¹H,¹H‐COSY, NOESY, HMQC, HMBC), EI‐MS, and single‐crystal X‐ray analysis.     

Novel aggregation of [Ni(thiolato)2(amine)2]-type square planes assisted by silver(I) ions

Treatment of [Ni(L)][L =((-)SCH(2)CH(2)NH[double bond, length as m-dash]C(CH(3))-)(2)] with Ag(+) in water gave a pinwheel-like S-bridged Ni(II)(3)Ag(I)(2) structure in [Ag(2)[Ni(L)](3)](2+), which further reacted with [Ni(L)] to produce a Ni(II)(4)Ag(I)(2) structure in [Ag(2)[Ni(L)](4)](2+) and a Ni(II)(7)Ag(I)(4) structure in [Ag(4)[Ni(L)](7)](4+).     

Protective Effect of Ferulic Acid against Hydrogen Peroxide Induced Apoptosis in PC12 Cells

Ferulic Acid (FA) is a highly abundant phenolic phytochemical which is present in plant tissues. FA has biological effects on physiological and pathological processes due to its anti-apoptotic and anti-oxidative properties, however, the detailed mechanism(s) of function is poorly understood. We have identified FA as a molecule that inhibits apoptosis induced by hydrogen peroxide (H₂O₂) or actinomycin D (ActD) in rat pheochromocytoma, PC12 cell. We also found that FA reduces H₂O₂-induced reactive oxygen species (ROS) production in PC12 cell, thereby acting as an anti-oxidant. Then, we analyzed FA-mediated signaling responses in rat pheochromocytoma, PC12 cells using antibody arrays for phosphokinase and apoptosis related proteins. This FA signaling pathway in PC12 cells includes inactivation of pro-apoptotic proteins, SMAC/Diablo and Bad. In addition, FA attenuates the cell injury by H₂O₂ through the inhibition of phosphorylation of the extracellular signal-regulated kinase (ERK). Importantly, we find that FA restores expression levels of brain-derived neurotrophic factor (BDNF), a key neuroprotective effector, in H₂O₂-treated PC12 cells. As a possible mechanism, FA increases BDNF by regulating microRNA-10b expression following H₂O₂ stimulation. Taken together, FA has broad biological effects as a neuroprotective modulator to regulate the expression of phosphokinases, apoptosis-related proteins and microRNAs against oxidative stress in PC12 cells.     

Photo-alignment Property of Azobenzene-containing Polyimide Films Swollen by Alkyl-amine

Photo-alignment efficiency of polyimide containing azobenzene in the backbone structure (Azo-PI) is significantly enhanced by exposing the precursor (polyamic acid: Azo-PAA) film to alkyl-amine vapor prior to photo-alignment. In this study, we have investigated the relationships between the alkyl-amine vapor treatment time, the swelling ratio of Azo-PAA films, and the photo-induced in-plane anisotropy. We found that: the Azo-PAA film swells on exposure to alkyl-amine vapor, and the swelling finally saturates; and the photo-induced in-plane anisotropy is correlated very closely with the swelling ratio. In addition, we pointed out the importance of the process order of alkyl-amine vapor treatment and photo-alignment.