Design and synthesis of labeling reagents (MS probes) for highly sensitive electrospray ionization mass spectrometry and their application to the detection of carbonyl, alcohol, carboxylic acid and primary amine samples.

Novel labeling reagents, called MS probes, which possess a positively charged quaternary amine moiety and can transform a neutral analyte into a charged compound by simply mixing with the analyte and allowing the mixture to stand from several minutes to 30 min at room temperature or while heating to 50 degrees C, were designed and synthesized for the highly sensitive detection of carbonyl, alcohol, carboxylic acid and primary amine samples by electrospray ionization mass spectrometry (ESI-MS). The positively charged products can be detected with high sensitivity in an ESI-MS system, which is the most popular liquid MS instrument. All of the labeled products showed a remarkably large increase in the molecular-ion peak abundance detection sensitivity of over 500-fold at picomolar concentration levels compared to that of unlabeled analytes in an ESI-MS system. These MS probes, used together with liquid MS detection, are widely applicable as a convenient method for the highly sensitive detection of less than picomolar levels of analytes, and therefore greatly enhance the power of ESI-MS analysis.     

Hückel and Möbius cyclic conjugated molecules

Generalized graphs represent Hückel-type and Möbius-type polycyclic conjugated systems. We show that the number of generalized graphs with different spectra for a given parent graph is not larger than 2 ^N(R) and is equal to 2 ^N(R) if no two rings are equivalent,N(R) being the number of rings (fundamental circuits) in the parent graph. We demonstrate that the rule for the stability of generalized graphs, proved in a previuos paper, and the information on the relative magnitudes of the effects of individual circuits enable one to predict the stabilities of generalized graphs without performing numerical calculations.     

Solvatochromic studies of interactions between surfactants and poly(N-substituted acrylamide)s

Interactions between poly(N-substituted acrylamide)s and surfactants, such as sodium dodecyl sulfate (SDoS) and sodium decyl sulfate (SDeS), in aqueous solutions were investigated using a solvatochromic probe. The polymers used were poly(N,N-dimethylacrylamide) (PDMA), poly(N-isopropylacrylamide) (PIPA), poly(N-acryloylpyrrolidine) (PAPR), and poly(vinylpyrrolidone) (PVPy) for comparison. They were labeled with pyridinium dicyanomethylide chromophore as a solvatochromic probe, and the changes in the microenvironment polarity of the polymer upon association with surfactant micelles were investigated by monitoring the λ_max in the absorption spectra of the probe molecule. It was found that the Gibbs free energy of micelle stabilization by polymer complexation for SDoS is 7.6, 4.1, and 2.2 kJ mol⁻¹, and for SDeS 5.1, 2.9, and 0.8 kJ mol⁻¹ with PIPA, PAPR, and PDMA, respectively. These results indicate that the complexation between polymer and surfactant is influenced not only by the alkyl-chain length of the surfactant, but also by the polymer side groups.     

Synthesis of novel organoselenium as catalyst for Baeyer-Villiger oxidation with 30% H2O2

A novel diselenide was synthesized in good yield via only four steps from phenol, and was employed as the catalyst for the Baeyer-Villiger oxidation with 30% H₂O₂ to obtain lactones in good yields.     

Motion of redox molecules in solution monitored by the highly-sensitive EQCM technique

The behavior of redox molecules in solution that was not detected by electrochemical techniques was measured by a highly-sensitive electrochemical quartz crystal microbalance (EQCM) technique that has been improved in this study to obtain a high sensitivity of EQCM measurement in solution. The improved EQCM technique allowed to monitor the motion of a redox molecule, that is an access of the molecule to an electrode surface and repulsion from the surface during redox. An EQCM technique currently in use has measured adsorption of redox molecules on an electrode surface or polymerization on the surface caused by a chemical reaction following redox, which exhibits an enough large mass change response to detect with an EQCM measurement. However, access and repulsion of redox molecule, which is a slight motion of the molecule near on electrode surface, has not been detected and investigated by an EQCM technique, because the mass change response seems to be very small. In this study, the redox behavior of methyl viologen on a bare gold surface, pyridinethiol surface and methylpyridinethiol surface was investigated. Although the three electrodes give the same cyclic voltammogram of methyl viologen, the three are different in QCM response recorded at the same time as the voltammetry. Access/repulsion of methyl viologen within an electrical double layer was monitored by the highly-sensitive EQCM technique.     

Synthesis,surface accumulation,and micellar properties of amphiphilic block copolymers

Amphiphilic block copolymers, i.e., poly(methyl methacrylate)-b-poly(2-dimethylethylammoniumethyl methacrylate), were synthesized by the reaction between two prepolymers. Carboxyl-terminated poly(methyl methacrylate) and hydroxyl-terminated poly(2-dimethylaminoethyl methacrylate) were prepared by radical polymerization of the corresponding monomers in the presence of thioglycolic acid and 2-mercaptoethanol as a chain transfer agent, respectively. Two condensation methods, i.e., DCC and the acid chloride method, were used for the reactions of these prepolymers. The subsequent quarternization produced the amphiphilic block copolymers. Surface property of poly(methyl methacrylate) films containing this amphiphilic block copolymer was examined by measuring contact angles for water. The addition of only 0.5 wt% of the block copolymer was sufficient to make poly(methyl methacrylate) surfaces hydrophilic. The block copolymer formed a polymeric micelle in acetone–water mixed solvent.     

Reaction of 1-alkylthioisoquinolinium salts with active methylene compounds

2-Alkyl-1-alkylthioisoquinolinium salts were readily prepared from 2-alkyl-1(2H)-isoquinolones via 2-alkyl1(2H)-thioisoquinolones in two steps. Under mild conditions, the reaction of 2-alkyl-1-alkylthioisoquinolinium salts with active methylene compounds in the presence of sodium hydride afforded 2-alkyl-1-(substituted methylene)iso-quinolines in good yields. Pyrrolo[2,1-a]isoquinolines were synthesized by the cyclization of 2-benzyl-1-(substituted methylene)isoquinolines using acetic anhydride.     

Structure reinvestigation of gelsemoxonine,a constituent of Gelsemium elegans,reveals a novel,azetidine-containing indole alkaloid

[structure: see text] The structure of gelsemoxonine, isolated from Gelsemium elegans Benth., was revised to be a novel oxindole alkaloid having an azetidine unit. A new alkaloid, 14,15-dihydroxygelsenicine, which was presumed to be a biosynthetic precursor of gelsemoxonine, was also isolated.     

Preparation and photolysis of polyamides having coumarin dimer component

The ring-opening polyaddition reaction of anti and syn head-to-head Coumarin dimers with diamines and the photocleavage behavior of the resulting polyamides were investigated. Anti head-to-head Coumarin dimer successfully reacted with aliphatic and aromatic diamines in an aprotic polar solvent to give corresponding high molecular weight polyamides. The polyamides showed good film forming ability and exhibited solubility behavior typical of polyelectrolytes. Furthermore, these polyamides were found to undergo exclusively asymmetric photocleavage on the cyclobutane rings in the polymer main chain to give a fumaramide unit with elimination of 2,2′-dihydroxystilbene. On the other hand, syn head-to-head Coumarin dimer gave only low molecular weight polyamides. These polymerization and photocleavage behaviors were elucidated in comparison with those of model reactions.     

Column chromatographic preconcentration of palladium with dimethyl glyoxime and acenaphthenequinone dioxime on naphthalene

A solid material consisting of dimethyl glyoxime (DMG), acenaphthenequinone dioxime (ANDO) or DMG-ANDO on naphthalene provides a very convenient, rapid and economical method for the preconcentration of palladium in synthetic samples. Pd-DMG, Pd-ANDO and Pd-DMG-ANDO are quantitatively retained on naphthalene in the column in the pH ranges 2.2–4.4, 1.8–5.6 and 1.7–6.8, respectively. The solid mixture consisting of the metal complex together with naphthalene is stripped from the column with 5 ml of dimethylformamide (DMF)-n-butylamine and the absorbance is measured at 247.6 nm with an atomic absorption spectrometer. Calibration graphs are linear over the palladium concentration range 5–25 μg per 5 ml of the final solution for all the three complexes. Ten replicate determinations of a sample solution containing 10 μg of palladium gave mean absorbances of 0.180, 0.225 and 0.230 with relative standard deviations of 1.8, 1.7 and 1.6% using the reagents DMg, ANDO and DMG-ANDO, respectively. The sensitivity of the method is better than the direct atomic absorption spectrometric determination of palladium. It is highest in case of the mixed ligands, i.e., DMG-ANDO (0.038 μg ml^?1 for 1% absorption). The method can be applied to the trace determination of palladium in complex materials.