Initial step of anthracene‐sensitized photoacid generation from diphenyliodonium hexafluorophosphate in an epoxy matrix studied by steady‐state and laser‐flash photolyses

The anthracene‐sensitized photodecomposition of diphenyliodonium hexafluorophosphate was studied in an epoxy matrix. From steady‐state photolysis, the generation of protons, which are considered to be the actual initiators of the polymerization of epoxides, was confirmed. In addition, 9‐phenylanthracene was detected as a main product from anthracene. From time‐resolved laser‐flash photolysis, a broad absorption band with a peak at about 500 nm was observed that was thought to be due to the precursor of 9‐phenylanthracene. On the basis of these results, we propose electron transfer from anthracene in the excited singlet state to the diphenyliodonium cation as the initial step of photoacid generation. This process is followed by fast chemical reactions, which generate 9‐phenylanthracene and protons, and back electron transfer from the diphenyliodine radical to the anthracene cation radical. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2937–2946, 2001     

CHARACTERISTIC PROPERTIES OF LECITHIN AS A SURFACTANT

Characteristic solution properties of lecithin were studied in 1) water+propanol/lecithin/hexadecane and 2) ethanol/lecithin/ hexadecane systems. 1) Solvent property of water changes by added alcohol and the hydrophile-lipophile property of lecithin is balanced in 13 wt% propanol aq.-hexadecane system. Three liquid phases, i.e. aqueous alcohol, lecithin and hexadecane are found. The volume fraction of the lecithin phase increases with its concentration and at 2.3 wt%/system, all solvent molecules are swelled and one microemulsion phase is obtained. 2) In ethanol/ lecithin/hexadecane system, lecithin is also insoluble in the solvent, and swells a large amount of hexadecane.     

A comparative study on acute toxicity of methylarsonic acid,dimethylarsinic acid and trimethylarsine oxide in mice

The acute toxicity of methylarsonic acid, CH₃AsO(OH)₂ (MAA), dimethylarsininc acid, (CH₃)₂AsO(OH) (DMAA), and trimethylarsine oxide, (CH₃)₃AsO (TMAO), were examined in mice with oral administration. The LD₅₀ values of MAA, DMAA and TMAO were 1.8, 1.2 and 10.6 g kg^?1 respectively. The toxicity of MAA and DMAA was very much lower than that for inorganic arsenic compounds. It was shown that TMAO has a similar acute toxicity to arsenobetaine. On the other hand, when the mice were administered 14.4 g kg^?1 of TMAO once only orally, a garlic-like odor (trimethylarsine, (CH₃)₃As) was definitely detectable in the exhalation of the animals by the human olfactory sense within about a few minutes.     

Selective growth of ZnO nanodots prepared by metalorganic chemical vapor deposition on focused-ion beam-nanopatterned substrates

Selective formation of ZnO nanodots grown by metalorganic chemical vapor deposition (MOCVD) was achieved on focused-ion beam (FIB)-nanopatterned SiO₂ and Si substrates. The selective formation characteristics, dimension, and density of ZnO nanodots on FIB-nanopatterned substrates strongly depended on the FIB-patterning and MOCVD-growth conditions. The mechanism of the selective formation of ZnO nanodots on FIB-nanopatterned SiO₂ substrates is attributed to a surfactant effect of the implanted Ga which leads to the formation of the preferred nucleation sites for the growth of ZnO nanodots, while that of ZnO nanodots on nanopatterned Si substrates is mainly considered in terms of the generation of surface atomic steps and kinks, which are created by Ga⁺ ion sputtering, on the patterned Si areas.     

Application of novel SIMS technique for imaging the active sites of oxygen reduction at the SOFC cathode/electrolyte interfaces

The oxygen reduction active sites were visualized around the O₂/SOFC cathode/electrolyte triple phase boundaries (TPB) by the¹⁶O/¹⁸O exchange techniques and secondary ion mass spectrometry (SIMS) analysis. The higher¹⁸O concentration is observed on the cathode top surfaces (La_0.9Sr_0.1MnO₃-mesh, Au-mesh, and Ag-porous), which suggested the promotion of oxygen adsorption and oxygen surface exchange at the cathode. The oxygen diffusion through the bulk of cathode occurred at the La_0.9Sr_0.1MnO₃-mesh and the Ag-porous cathodes, not at the Au-mesh cathode. On the YSZ surfaces after removing the cathode, the active sites for oxygen incorporation were analyzed by SIMS. The active sites for oxygen incorporation were at the La_0.9Sr_0.1MnO₃/YSZ interface as well as the TPB. On the other hand, the active sites for oxygen incorporation are limited to the TPB in the case of the Au-mesh removed YSZ surface. From the SIMS analysis, the expansion of the active sites for oxygen incorporation is less than a few μm from the TPB lines. Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16–22, 2001.     

Quantitative determination of benzalkonium chloride in treated wood by solid-phase extraction followed by liquid chromatography with ultraviolet detection

Ammoniacal copper quat (ACQ) compound wood preservative is comprised of copper and quaternary ammonium compounds with benzalkonium chloride (BAC) as the active ingredient. Solid-phase extraction (SPE) followed by liquid chromatography with ultraviolet detection (LC-UV) was developed for quantitative determination of BAC in treated wood. Five species of wood were used, Japanese cedar (Cryptomeria japonica), Japanese larch (Larix leptolepis), Yezo spruce (Picea jezoensis), Sakhalin fir (Abies sachalinensis), and western hemlock (Tsuga heterophylla). BAC used in the present study was composed of 66% C12, 33% C14 and less than 1% C16. BAC was added to each wood species (500 mg) then extracted with HCl-ethanol (20 ml) and quantitatively determined with LC-UV (262 nm). Wood extractives from the heartwood of each species, except western hemlock, interfered with quantitative determination of BAC, but SPE with an Oasis MCX cartridge was effective in preventing this. Using the present methods, BAC homologue peaks were clearly confirmed without interference. Recoveries from wood ranged from 92 to 101% and the limit of quantitation was approximately 240 microg/g wood for the C12 and C14 homologues.     

Tropical Weyl Group Action via Point Configurations and τ-Functions of the q-Painlevé Equations

Starting from certain point sets in the projective plane, we construct a tropical (or subtraction-free birational) representation of Weyl groups over the field of τ-functions. In particular, our construction includes E ₈ ⁽¹⁾ , E ₇ ⁽¹⁾ , E ₆ ⁽¹⁾ and D ₅ ⁽¹⁾ as affine cases; each of them gives rise to the q-difference Painlevé equation.     

Thickening of crystals during rapid heating. II. Crosslinked polyethylene and methoxymethylated nylon 6

The effect of modification of polymer chains on crystal thickening during heating was investigated with an apparatus devised for rapid measurement of small-angle x-ray diffraction. Thickening of crystals still occurred even at a heating rate of 18°C/min in polyethylene irradiated with gamma ray doses of 30–300 Mrad, and the melting point was depressed. These results showed that the melting point depression due to irradiation is not due to a restriction on crystal thickening but rather to crystal lattice distortion. On the other hand, although methoxymethylation of nylon 6 completely inhibits crystal thickening, the melting point increases or decreases depending on the temperature of annealing preceding methoxymethylation. From these results we are led to conclude that irradiation and methoxymethylation are not effective means of obtaining the relation between melting point and crystal thickness.     

Determination of inorganic arsenic and organic arsenic compounds in marine organisms by hydride generation/cold trap/gas chromatography— mass spectrometry

The behavior of arsenite, methylarsonic acid, dimethylarsinic acid, trimethylarsine oxide, dimethyl-R-arsine oxides, and trimethyl-R-arsonium compounds (R = carboxymethyl, 2-carboxyethyl, 2-hydroxyethyl) toward sodium borohydride and hot aqueous sodium hydroxide was investigated. The arsines obtained by sodium borohydride reduction of the undigested and digested solutions were collected in a liquid-nitrogen cooled trap, separated with a gas chromatograph, and detected with a mass spectrometer in the selected-ion-monitoring mode. The investigated arsenic compounds were stable in hot 2 mol dm^?3 sodium hydroxide except arsenobetaine [trimethyl(carboxymethyl)arsonium zwitterion] that was converted to trimethylarsine oxide, and dimethyl(ribosyl)arsine oxides that were decomposed to dimethylarsinic acid. Hydride generation before and after digestion of extracts from marine organisms allowed inorganic arsenic, methylated arsenic, arsenobetaine, and ribosyl arsenic compounds to be identified and quantified. This method was applied to extracts from shellfish, fish, crustaceans, and seaweeds.