Tetrafunctional initiators for cationic polymerization of olefins

3,3′,5,5′‐Tetrakis(2‐chloro‐2‐propyl)biphenyl (biphenyl tetracumyl chloride, BPTCC) and 1,3‐bis[3,5‐bis(2‐chloro‐2‐propyl)phenoxy]propane (diphenoxypropane tetracumyl chloride, DPPTCC) were synthesized as initiators for quasiliving cationic polymerization of isobutylene (IB). In the synthesis of BPTCC, tetrafunctionality was achieved via the coupling of dimethyl 5‐bromoisophthalate (DMBI) using nickel dibromide bis(triphenylphosphine) and zinc in the presence of a base; in the synthesis of DPPTCC, two equivalents of dimethyl 5‐hydroxyisophthalate were linked via reaction with 1,3‐dibromopropane in the presence of potassium carbonate. Both initiators were used to initiate the polymerization of IB under quasiliving cationic polymerization conditions. PIB initiated from BPTCC revealed a chain end/molecule value (as determined by ¹H‐NMR) of 3.85, verifying the nearly exclusive production of 4‐arm polyisobutylene (PIB). GPC analysis revealed a narrow peak representing the target four‐arm PIB, with a slight shoulder at high elution volumes (low molecular weights). GPC analysis of the PIB initiated by DPPTCC revealed multimodal distributions, suggesting the formation of two‐, three‐, and four‐arm star polymers during the polymerization. This behavior was attributed to Friedel–Crafts alkylation of the initiator core after the addition of one IB unit, which was activated by the electron‐donating oxytrimethyleneoxy linking moiety. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5942–5953, 2004     

Synthesis and characterization of multiblock copolymers composed of poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one) outer blocks and poly(L‐lactide) inner blocks

Ethylene glycol (EG) initiated, hydroxyl‐telechelic poly(L ‐lactide) (PLLA) was employed as a macroinitiator in the presence of a stannous octoate catalyst in the ring‐opening polymerization of 5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one (MBC) with the goal of creating A–B–A‐type block copolymers having polycarbonate outer blocks and a polyester center block. Because of transesterification reactions involving the PLLA block, multiblock copolymers of the A–(B–A)_n–B–A type were actually obtained, where A is poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one), B is PLLA, and n is greater than 0. ¹H and ¹³C NMR spectroscopy of the product copolymers yielded evidence of the multiblock structure and provided the lactide sequence length. For a PLLA macroinitiator with a number‐average molecular weight of 2500 g/mol, the product block copolymer had an n value of 0.8 and an average lactide sequence length (consecutive C₆H₈O₄ units uninterrupted by either an EG or MBC unit) of 6.1. For a PLLA macroinitiator with a number‐average molecular weight of 14,400 g/mol, n was 18, and the average lactide sequence length was 5.0. Additional evidence of the block copolymer architecture was revealed through the retention of PLLA crystallinity as measured by differential scanning calorimetry and wide‐angle X‐ray diffraction. Multiblock copolymers with PLLA crystallinity could be achieved only with isolated PLLA macroinitiators; sequential addition of MBC to high‐conversion L ‐lactide polymerizations resulted in excessive randomization, presumably because of residual L ‐lactide monomer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6817–6835, 2006     

Development of a universal Raman detector for microchromatography

Summary A detector for microchromatography in which Raman spectroscopy is used to identify the eluted species has been developed. The detector is designed to be applicable to a wide range of compounds without requiring the presence of a chromophore. Its use is illustrated in the analysis of nitro compounds on a 250 μm i.d. column. Raman spectra of each of the compounds could be identified as they passed the detector. The advatages of the use of fully deuterated solvents are demonstrated by the analysis of nitrobenzenes in methanol/water mobile phases. The detection limit for nitrobenzene using the Raman line at 1342 cm⁻¹ was 75ng.     

The First VOPO4·2H2O Intercalation Compound Synthesized through a Solid-State Reaction at Room Temperature

This communication reports the first intercalation into VOPO₄·2H₂O performed through a solid-state reaction at room temperature. Ethyleneurea, EU (2-imidazolidone) was intercalated into the oxovanadium phosphate by grinding in a mortar stoichiometric amounts of both reagents at room temperature for 30 min. C, H and N elemental analyses of the obtained intercalation compound gave the formula VOPO₄·(EU)·H₂O. The profile of the absorption bands due to the VOPO₄ lattice vibration around 1000 cm⁻¹ was retained after reaction, providing evidence that an intercalation compound and not merely a salt of V-P-O species was produced. For α-VOPO₄·2H₂O, the interlayer distance is 0.75 nm, whereas for the EU inter-calation compound it is 0.95 nm. The obtained SEM micrographs show that the microstructure of VOPO₄·2H₂O is changed after reaction, with a total exfoliation of the oxovanadium matrix.     

Investigation of the ceriumIV oxidation of poly(vinyl alcohol)

Initiation of ceric ion-induced grafting from poly(vinyl alcohol) (PVOH) was studied by examining the formation and lifetime of colored complexes between cerium^IV and (1) a commercial PVOH, (2) a diol-free PVOH, and (3) several model 1,2-diols. UV/visible spectroscopy was employed using a wavelength of 520 nm. Results showed that the 1,2-diols, which are an inherent defect in PVOH, are the sites most reactive toward ceric ion. The observed rate constant for the reaction was found to increase with decreasing [Ce^IV] until the maximum rate was reached at which time reaction took place exclusively with 1,2-diols. The activation energy for oxidation of commercial PVOH at the maximum rate was 15.4 kcal/mol while that for diol-free PVOH was 22.4 kcal/mol. The 1,2-diols of PVOH displayed a high equilibrium constant for complexation with ceric ion, compared to the model 2,3-butanediol. It was suggested that the PVOH chain segments bring about crowding of the diol group, and this leads to a higher equilibrium constant for complexation. The lowest energy conformation of a PVOH chain segment containing a 1,2-diol linkage was calculated using the CHEMLAB-II molecular design program, and the 1,2-diol was predicted to be at the center of a sharp bend in the chain brought about by its presence.     

Thermogravimetric and differential scanning calorimetric investigations of manganese–glycine interactions

Thermogravimetric (t.g.) and differential scanning calorimetric (d.s.c.) data have been used to study metal–amino acid interactions in adducts of general formula MnCl₂ · ngly (gly = glycine, n = 0.7, 2.0, 4.0 and 5.0). All the prepared adducts exhibit only a one step mass loss associated with the release of glycine molecules, except for the 0.7gly adduct, which exhibits two glycine mass loss steps. From d.s.c. data, the enthalpy values associated with the glycine mass loss can be calculated: MnCl₂ · 0.7gly = 409 and 399 kJ mol^–1, MnCl₂ · 2.0gly = 216 kJ mol^–1, MnCl₂ · 4.0gly = 326 kJ mol^–1 and MnCl₂ · 5.0gly = 423 kJ mol^–1, respectively. The enthalpy associated with the ligand loss, plotted as function of the number of ligands for the n = 2.0, 4.0 and 5.0 adducts, gave a linear correlation, fitting the equation: H (ligand loss)/kJ mol^–1 = 67 × (number of ligands, n) + 76. A similar result was achieved when the enthalpy associated with the ligand loss was plotted as a function of the _a(COO^–) bands associated with the coordination through the carboxylate group, 1571, 1575 and 1577 cm^–1, respectively, for the n = 2.0, 4.0 and 5.0 adducts, giving the equation H (ligand loss) /kJ mol^–1 = 33.5 × _a(COO^–) /cm^–1 – 52418.5. This simple equation provides evidence for the enthalpy associated with the ligand loss being very closely related to the electronic density associated with the metal–amino acid bonds.     

Synthesis,characterization and a thermogravimetric study of copper,cobalt and tin mono- and bis-adducts with ethyleneurea,ethylenethiourea and propyleneurea

This paper describes the synthesis, characterization and a thermogravimetric (t.g.) study of 11 adducts of general formula MCl₂·nL (M = Cu, Co and Sn; n = 1 and 2 for Sn, and 2 for Cu and Co; L = ethyleneurea eu, ethylenethiourea etu, and propyleneurea pu). The i.r. results shows that the eu and pu adducts are coordinated through oxygen, whereas for etu nitrogen is the coordination site. The (C=O) or (C=S) trend is: Cu > Co > Sn. The t.g. curves show that the adducts release ligand molecules in a single mass loss step. As regards considering adducts with the same stoichiometry, the observed thermal stability trend is: etu > pu > eu.     

Automated liquid chromatographic/tandem mass spectrometric method for screening beta-blocking drugs in urine

An automated liquid chromatographic/tandem mass spectrometric (LC/MS/MS) method is presented for the screening and confirmation of 16 beta-blocking drugs in clinical and autopsy urine samples. The described method involved C(18) solid phase extraction, LC separation and MS analysis on a triple-stage quadrupole mass analyser. Samples were initially pre-screened for the presence of any beta-blocking drugs using LC/MS with selected ion monitoring. Any compounds tentatively identified as beta-blocking drugs on the basis of their LC retention time and protonated molecular ion were then automatedly subjected to a second analysis in which the relevant MS/MS product ion mass spectra were acquired. These product ion mass spectra were then automatically searched against a 400-substance mass spectral library containing previously acquired beta-blocking drugs. The results demonstrated that library search of beta-blocking drugs in urine with MS/MS product ion mass spectra was more reliable and produced fewer false negatives than library searching with mass spectra derived from single-stage quadrupole MS. The limits of identification in the MS/MS product ion scan ranged from 0.02 mg l(-1) for carvedilol to 1.2 mg l(-1) for pindolol, the majority of the values being below 0.2 mg l(-1).     

Adsorption of crude oil on anhydrous and hydrophobized vermiculite

This publication reports the adsorption of crude oil on vermiculite samples, expanded and hydrophobized with carnauba (Copernícia Cerífera) wax. The adsorption studies were performed by using columns filled with the vermiculite matrices and by dispersion of the vermiculite samples in an oil-water (50 ppm of oil) emulsion. The hydrate vermiculite exhibits a very low adsorption capacity against crude oil. On the other hand, anhydrous (expanded) and hydrophobized matrices show a high adsorption capacity. The 10% hydrophobized matrix show a 50% increased adsorption capacity, in comparison with the expanded one. For adsorption performed in the water-oil emulsion, saturation of the solid hydrophobized matrix is achieved after 60 min. The hydrophobized samples exhibit adsorption factors in the 0.7-1.0 range.