Living cationic polymerization of isobutylene coinitiated by FeCl3 in the presence of isopropanol

A simple but effective FeCl₃‐based initiating system has been developed to achieve living cationic polymerization of isobutylene (IB) using di(2‐chloro‐2‐propyl) benzene (DCC) or 1‐chlorine‐2,4,4‐trimethylpentane (TMPCl) as initiators in the presence of isopropanol (iPrOH) at ?80 °C for the first time. The polymerization with near 100% of initiation efficiency proceeded rapidly and completed quantitatively within 10 min. Polyisobutylenes (PIBs) with designed number‐average molecular weights (M_n) from 3500 to 21,000 g mol^?1, narrow molecular weight distributions (MWD, M_w/M_n ≤ 1.2) and near 100% of tert‐Cl terminal groups could be obtained at appropriate concentrations of iPrOH. Livingness of cationic polymerization of IB was further confirmed by all monomer in technique and incremental monomer addition technique. The kinetic investigation on living cationic polymerization was conducted by real‐time attenuated total reflectance Fourier transform infrared spectroscopy. The apparent constant of rate for propagation (k_p^A) increased with increasing polymerization temperature and the apparent activation energy (ΔE_a) for propagation was determined to be 14.4 kJ mol^?1. Furthermore, the triblock copolymers of PS‐b‐PIB‐b‐PS with different chain length of polystyrene (PS) segments could be successfully synthesized via living cationic polymerization with DCC/FeCl₃/iPrOH initiating system by sequential monomer addition of IB and styrene at ?80 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Quasiliving Carbocationic Polymerization. XVII. Synthesis Of Poly (Styrene-β-Isobutylene-β-Styrene)

Poly(styrene-b-isobutylene-b-styrene) has been synthesized by sequential carbocationic polymerization under quasiliving conditions at -90°C. The quasiliving synthesis was effected by first continuously and slowly condensing gaseous isobutylene (IB) to a bifunctional initiating system (p-dicumyl chloride/TiCl₄) dissolved in a hexane-methylene chloride (60:40 v/v) mixture. After the quasiliving polyisobutylene (PIB) sequence had reached a desired molecular weight, styrene (St) was continuously and slowly added to produce the polystyrene (PSt) sequence. The products consisted of the target triblock. However, due to initiation by impurities and possibly to chain transfer to both IB and St, it also contained diblocks and small amounts of homopolymers. While the latter could be removed by selective fractionation, the triblocks and diblocks could not be separated. The mechanism of quasiliving polymerization leading to PIB/PSt blocks is discussed.     

Functional polyisobutylenes via a click chemistry approach

1‐(ω‐Azidoalkyl)pyrrolyl‐terminated polyisobutylene (PIB) was successfully synthesized both by substitution of the terminal halide of 1‐(ω‐haloalkyl)pyrrolyl‐terminated PIB with sodium azide and by in situ quenching of quasiliving PIB with a 1‐(ω‐azidoalkyl)pyrrole. Azide substitution of the terminal halide was carried out in 50/50 heptane/DMF at 90 °C for 24 h using excess azide. The 1‐(ω‐haloalkyl)pyrrolyl‐PIB precursors included 1‐(2‐chloroethyl)pyrrolyl‐PIB, 1‐(2‐bromoethyl)pyrrolyl‐PIB, and 1‐(3‐bromopropyl)pyrrolyl‐PIB. In situ quenching involved direct addition of 1‐(2‐azidoethyl)pyrrole to quasiliving PIB initiated from 5‐tert‐butyl‐1,3‐di(1‐chloro‐1‐methylethyl)benzene (bDCC)/TiCl₄ at ?70 °C in hexane/CH₃Cl (60/40, v/v). ¹H NMR analysis of the quenched product revealed mixed isomeric end groups in which PIB was attached at either C₂ or C₃ of the pyrrole ring (C₂/C₃ = 0.40/0.60). SEC indicated the absence of coupled PIB under optimized conditions, confirming exclusive mono‐substitution on each pyrrole ring. 1‐(3‐Azidopropyl)pyrrolyl‐PIB was reacted in modular fashion with various functional alkynes, propargyl alcohol, propargyl acrylate, glycidyl propargyl ether, and 3‐dimethylamino‐1‐propyne, via a Huisgen 1,3‐dipolar cycloaddition (Click) reaction, using Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine or bromtris(triphenylphosphine)Cu(I) as catalyst. The reactions were quantitative and produced PIBs bearing terminal hydroxyl, acrylate, glycidyl, or dimethylaminomethyl groups attached via exclusively four‐substituted triazole linkages. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2533–2545, 2010     

Synthesis of methyl methacrylate,styrene, and isobutylene multiblock copolymers using atom transfer and cationic polymerization

ABCBA‐type pentablock copolymers of methyl methacrylate, styrene, and isobutylene (IB) were prepared by the cationic polymerization of IB in the presence of the α,ω‐dichloro‐PS‐b‐PMMA‐b‐PS triblock copolymer [where PS is polystyrene and PMMA is poly(methyl methacrylate)] as a macroinitiator in conjunction with diethylaluminum chloride (Et₂AlCl) as a coinitiator. The macroinitiator was prepared by a two‐step copper‐based atom transfer radical polymerization (ATRP). The reaction temperature, ?78 or ?25 °C, significantly affected the IB content in the resulting copolymers; a higher content was obtained at ?78 °C. The formation of the PIB‐b‐PS‐b‐PMMA‐b‐PS‐b‐PIB copolymers (where PIB is polyisobutylene), prepared at ?25 (20.3 mol % IB) or ?78 °C (61.3 mol % IB; rubbery material), with relatively narrow molecular weight distributions provided direct evidence of the presence of labile chlorine atoms at both ends of the macroinitiator capable of initiation of cationic polymerization of IB. One glass‐transition temperature (T_g), 104.5 °C, was observed for the aforementioned triblock copolymer, and the pentablock copolymer containing 61.3 mol % IB showed two well‐defined T_g's: ?73.0 °C for PIB and 95.6 °C for the PS–PMMA blocks. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3823–3830, 2005     

Low cost bifunctional initiators for bidirectional living cationic polymerization of olefins. I. isobutylene

We describe the discovery of novel low cost bifunctional initiators 2,4,7,9‐tetramethyl‐tricyclo[6.2.0.0³⁶]deca‐1(8),2,6‐triene‐4,9‐diol (bBCB‐diOH) and 4,9‐dichloro,2,4,7,9‐tetramethyl‐tricyclo[6.2.0.0³⁶]deca‐1(8),2,6‐triene (bBCB‐diCl), for living cationic bidirectional polymerization of olefins, for example, isobutylene. bBCB‐diOH was quantitatively synthesized in one step by UV radiation of commercially available diacetyl durene (DAD) and bBCB‐diCl by hydrochlorination of bBCB‐diOH. These molecules, in conjunction with TiCl₄ coinitiator, initiate the living polymerization of isobutylene. Livingness was demonstrated by linear conversion versus molecular weight (MW) plots and narrow MW distributions. Polymerizations are slower than those initiated by the universally used “hindered” bifunctional initiator 5‐tert‐butyl‐1,3‐bis(1‐chloro‐1‐methyl)benzene and are suitable for rate studies. Herein, we report the synthesis, by the use of bBCB‐diCl, of relatively low MW (M _n < 3000 g mol^?1) allyl‐telechelic polyisobutylene (PIB) used for the synthesis of PIB‐based polyurethanes and that of relatively high MW (M _n > 30,000) living PIB telechelics for the synthesis of thermoplastic elastomers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3716–3724     

Novel block ionomers. I. Synthesis and characterization of polyisobutylene‐based block anionomers

A series of novel block anionomers consisting of polyisobutylene (PIB) and poly(methacrylic acid) (PMAA) segments were prepared and characterized. The specific targets were various molecular weight diblocks (PIB‐b‐PMAA^?), triblocks (PMAA^?‐b‐PIB‐b‐PMAA^?), and three‐arm star blocks [Φ(PIB‐b‐PMAA^?)₃] consisting of rubbery PIB blocks with a number‐average degree of polymerization of 50–1000 (number‐average molecular weight = 3000–54,000 g/mol) connected to blocks of PMAA^? anions with a number‐average degree of polymerization of 5–20. The overall strategy for the synthesis of these constructs consisted of four steps: (1) synthesis by living cationic polymerization of t‐chloro‐monotelechelic, t‐chloro‐ditelechelic, and t‐chloro‐tritelechelic PIBs; (2) site transformation to obtain PIBs fitted with termini capable of mediating the atom transfer radical polymerization (ATRP) of tert‐butyl methacrylate (tBMA); (3) ATRP of tBMA, and (4) hydrolysis of poly(tert‐butyl methacrylate) to PMAA^?. The architectures created and the synthesis steps employed are summarized. Kinetic and model experiments greatly assisted in the development of convenient synthesis methods. The microarchitectures of the various block anionomers were confirmed by spectroscopy and other techniques. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3662–3678, 2002     

Novel functional initiators for oxazoline polymerization

The initiating behavior of the functional tosylates 1 – 4 and triflates 5 and 6 for the cationic ring‐opening polymerization of 2‐methyl‐1,3‐oxazoline was investigated. The emphasis was directed at tosylates and triflates with 2,2‐dimethyl‐1,3‐dioxolane‐, 2,3‐epoxypropyl‐, 2,3‐didodecanoyl‐glycerol‐, and cholest‐5‐en‐moieties that allow the construction of amphiphilic polyoxazoline conjugates. The tosylates were prepared by a simple reaction of the corresponding alcohols with p‐toluenesulfonyl chloride, whereas the preparation of the corresponding triflates required low temperature and the use of 2,6‐di‐tert‐butylpyridine as a sterically hindered base. Among the initiators tested, 2,2‐dimethyl‐(4‐trifluoromethanesulfonyloxymethyl)‐1,3‐dioxolane 6 gave the best results in respect to molecular weight and polydispersity. Starting from the corresponding functional oxazoline polymers obtained with 6 as an initiator, amphiphilic lipid‐polyoxazoline conjugates with a diacylglycerol backbone could be prepared. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2821–2831, 2001     

Synthesis of polyisobutylene with arylamino terminal group by combination of cationic polymerization with alkylation

The controlled cationic polymerization of isobutylene (IB) initiated by H₂O as initiator and TiCl₄ as coinitiator was carried out in n‐Hexane/CH₂Cl₂ (60/40, v/v) mixture at −40 °C in the presence of N,N‐dimethylacetamide (DMA). Polyisobutylene (PIB) with nearly theoretical molecular weight (M_n = 1.0 × 10⁴ g/mol), polydispersity (M_w/M_n) of 1.5 and high content (87.3%) of reactive end groups (tert‐Chlorine and α‐double bond) was obtained. The Friedel‐Crafts alkylation of triphenylamine (TPA) with the above reactive PIB was further conducted at different reactions, such as [TPA]/[PIB], solvent polarity, alkylation temperature, and time. The resultant PIBs with arylamino terminal group were characterized by ¹H NMR, UV, and GPC with RI/UV dual detectors. The experimental results indicate that alkylation efficiency (A_eff) increased with increases in [TPA]/[PIB], reaction temperature, and reaction time and with a decrease in solvent polarity. The alkylation efficiency could reach 81.0% at 60/40(v/v) mixture of n‐Hex/CH₂Cl₂ with [TPA]/[PIB] of 4.49 at 50 °C for 54 h. Interestingly, the synthesis of PIB with arylamino terminal group could also be achieved in one pot by combination of the cationic polymerization of IB initiated by H₂O/TiCl₄/DMA system with the successive alkylation by further introduction of TPA. Mono‐, di‐ or tri‐alkylation occurred experimentally with different molar ratio of [TPA]/[PIB]. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 936–946, 2008     

Cationic polymerization of isobutyl vinyl ether initiated with transition‐metal ate complexes

The cationic polymerization of isobutyl vinyl ether was examined with transition‐metal ate complexes with trityl cation as initiators. The initiators were generated by the reaction of triphenylmethyl chloride [trityl chloride (TrCl)] with ate complexes of Nb, Mo, and W with lithium cation, which were obtained in situ by the reaction of the transition‐metal halides with anionic reagents (organolithium or lithium amide). When the polymerization was initiated with a mixture of TrCl and Li⁺[NbH₅(NnBuPh)]^?, the resulting poly(isobutyl vinyl ether)s had narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight = 1.13–1.20). Although the polymerization was supposed to be initiated by the electrophilic attack of the trityl cation, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis of the resulting poly(isobutyl vinyl ether)s revealed the presence of H at the α‐chain end. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2636–2641, 2006     

Novel star‐block polymers: Three polyisobutylene‐b‐poly(methyl methacrylate) arms radiating from an aromatic core

A series of novel three‐arm star blocks consisting of three polyisobutylene‐b‐poly(methyl methacrylate) (PIB‐b‐PMMA) diblocks radiating from a tricumyl core were synthesized, characterized, and tested. The synthetic strategy involved three steps: the synthesis of Cl^t ‐tritelechelic PIB by living cationic isobutylene (IB) polymerization, the conversion of the Cl^t termini to isobutyryl bromide groups, and the initiation of living radical methyl methacrylate (MMA) polymerization by the latter groups. The PIB and PMMA segment lengths (M_n 's) could be controlled by controlling the conditions of the living cationic and radical polymerizations of IB and MMA, respectively. Core destruction analysis directly proved the postulated three‐arm microarchitecture. The structures of the products were analyzed by ¹H NMR and Fourier transform infrared spectroscopies, and their thermal properties were analyzed by differential scanning calorimetry and thermogravimetric analysis. The presence of a low‐ and a high‐temperature glass transition (T_g,PIB ∼ −63°C, T_g,PMMA ∼ 120°C) indicated a phase‐separated micromorphology. Stress/strain analysis showed a tensile strength of up to ∼ 22.9 MPa and an elongation of ∼ 200%. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 706–714, 2000     

Metal‐catalyzed living radical graft copolymerization of olefins initiated from the structural defects of poly(vinyl chloride)

Commercial poly(vinyl chloride) (PVC) contains allyl chloride and tertiary chloride groups as structural defects. This article reports the use of the active chloride groups from the structural defects of PVC as initiators for the metal‐catalyzed living radical graft copolymerization of PVC. The following monomers were investigated in graft copolymerization experiments: methyl methacrylate, butyl methacrylate, tert‐butyl methacrylate, butyl acrylate, methacrylonitrile, acrylonitrile, styrene, 4‐chloro‐styrene, 4‐methyl‐styrene, and isobornylmethacrylate. Cu(0)/bpy, CuCl/bpy, CuBr/bpy, Cu₂O/bpy, Cu₂S/bpy, and Cu₂Se/bpy (where bpy = 2,2′‐bipyridine) were used as catalysts. Living radical polymerizations initiated from 1‐chloro‐3‐methyl‐2‐butene, allyl bromide, and 1,4‐dichloro‐2‐butene as models for the allyl chloride structural defects and from 3‐chloro‐3‐methyl‐pentane and 1,3‐dichloro‐3‐methylbutane as models for the tertiary chloride defects were studied. Graft copolymerization experiments were accessible in solution, in a swollen state, and in bulk. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1120–1135, 2001     

Selectivity in anionic and cationic ring‐opening polymerizations of tetramethyl‐1‐(3′‐trifluoromethylphenyl)‐1‐phenylcyclotrisiloxane and tetramethyl‐1‐[3′,5′‐bis(trifluoromethyl)phenyl]‐1‐phenylcyclotrisiloxane

Anionic and cationic ring‐opening polymerizations of two novel cyclotrisiloxanes, tetramethyl‐1‐(3′‐trifluoromethylphenyl)‐1‐phenylcyclotrisiloxane ( I ) and tetramethyl‐1‐[3′,5′‐bis(trifluoromethyl)phenyl]‐1‐phenylcyclotrisiloxane ( II ), are reported. Anionic ring‐opening polymerization of I or II leads to copolymers with highly regular microstructures. Copolymers obtained by cationic polymerizations of I or II , initiated by triflic acid, have less regular microstructures characteristic of chemoselective polymerization processes. The composition and microstructure of copolymers have been characterized by ¹H and ²⁹Si‐NMR, the molecular weight distributions by GPC, and the thermal properties by DSC and TGA. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5235–5243, 2004     

“Grafting From” -Living Cationic Polymerization of Poly(isobutylene) from Silica-Nanoparticle Surfaces

Summary: This publication discusses the development of new methods for producing organic-inorganic core-shell-nanoparticles (NP's) via a combination of “grafting-from” techniques and living cationic polymerization reactions. Based on the surface initiated, quasiliving cationic polymerization of isobutylene, polymeric shells of polyisobutylene (PIB) were attached onto nanoparticles (silica NP's of different sizes, r = 12–40 nm) with a high degree of precision. “Grafting-from” polymerization provides an ideal method to control the number of polymer chains per particle by means of the degree of initial derivatization and the length of the polymeric chains. The resulting nanocomposite materials were analyzed using DLS, TEM, GPC, TGA, DSC.     

Haloacetaldehyde polymers and macromolecular asymmetry

Polyhaloaldehydes play a special role in aldehyde polymerization. The most prominent trihaloacetaldehyde polymer, polytrichloroacetaldehyde, opened the door to new concepts in polymer chemistry: first, cryotachensic polymerization, the separation of the initiation step from the propagation steps with the ceiling temperature principle for the fabrication of insoluble and infusible polymers, and second, the concept of macromolecular asymmetry and stereospecific and conformationally specific polymerization. Trichloroacetaldhyde could be readily polymerized with a wide range of anionic (and also some cationic) initiators. When the anionic polymerization was initiated with chiral anions, it gave polychloral of one helix sense. To understand the genesis of the polymerization, the oligomerization was investigated to learn how the stereochemistry of the polymerization was established, also in chiral form. All 10 fluoro‐, chloro‐, and bromo‐substituted trihaloacetaldehydes were synthesized as necessary and polymerized, and the polymers were investigated. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2623–2634, 2000     

N‐chloro amides,lactams, carbamates,and imides. New classes of initiators for the metal‐catalyzed living radical polymerization of methacrylates

Metal‐catalyzed living radical polymerization of methyl methacrylate initiated with N‐chloro amides (N‐chloro N‐ethyl propionamide, N‐chloro benzanilide, N‐chloro methylbenzamide, and N‐chloro acetanilide), lactams (N‐chloro caprolactam and N‐chloro 2‐pyrrolidinone), carbamates or urethanes (N‐chloro ethylcarbamate or N‐chlorourethane), imides (N‐chloro phtalimide, N‐chloro succinimide, trichloroisocyanuric acid, and N‐chloro saccharin) and catalyzed with the self‐regulated catalytic system Cu₂S/2,2′‐bipyridine is reported. The initiation efficiency of these initiators is determined by their structure. Regardless of the initiator efficiency, in all cases, poly (methyl methacrylate) with narrow molecular weight distribution and functionalized chain‐ends was obtained. These new classes of initiators open new strategies for the functionalization of polymer chain‐ends and for the synthesis of complex architectures by graft copolymerization initiated from N‐chloro proteins, aliphatic, aromatic and semiaromatic polyamides, and polyurethanes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5283–5299, 2005     

Cationic polymerization behavior of isobutyl vinyl ether with arenesulfonates as non‐salt‐type latent thermal initiators

Substituted and unsubstituted benzenesulfonic acid cyclohexyl esters (1–7) were synthesized, and their possibility as latent thermal initiators in the cationic polymerization of isobutyl vinyl ether (IBVE) was examined to develop novel non‐salt type latent cationic initiators. Thermal decomposition of cyclohexyl p‐nitrobenzenesulfonate (2) in C₆D₆ at 80°C proceeded to exclusively afford cyclohexene as well as p‐nitrobenzenesulfonic acid. Cationic polymerization of IBVE with 1 mol % of an arenesulfonate (1–6) in bulk was carried out at 40–100°C for 12 h. No polymerization took place below 50°C, while the consumption of IBVE depending on both the polymerization temperature and the structure of the arenesulfonates was observed above 60°C. The obtained polyIBVEs showed bimodal GPC curves in several cases, revealing the intervention of two independent propagation species in the polymerization. The cationic polymerization of IBVE with cyclohexyl 2,4,6‐triisopropylbenzenesulfonate (7) at 80°C confirmed the acceleration effect of bulkiness on the polymerization rate. It was concluded that the polymerization was largely dependent on both electronic and steric factors of the aryl groups of the initiators which were directly related to the stability of the sulfonate anions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 293–301, 1999     

Synthesis of α,ω‐di(iodo)PVC and of four‐arm star PVC with identical active chain ends by SET‐DTLRP of VC initiated with bifunctional and tetrafunctional initiators

Na₂S₂O₄‐catalyzed single‐electron transfer – degenerative chain transfer‐mediated living radical polymerization (SET‐DTLRP) of VC initiated with the bifunctional initiators 1,2‐bis(iodopropionyloxy)ethane, dimethyl 2,5‐diiodohexanedioate, and bis(2‐methoxyethyl)‐2,5‐diiodohexanedioate as well as the tetrafunctional initiator pentaerythritol tetrakis(2‐iodopropionate) is reported. This SET‐DTLRP was performed in water at ambient temperature in the presence of polyvinyl alcohol and hydroxypropyl methylcellulose surfactants and provides methods for the synthesis of α,ω‐di(iodo)PVC with two identical active chain ends and of four‐arm star PVC with four identical active chain ends. These difunctional and tetrafunctional derivatives of PVC are also macroinitiators for the synthesis of ABA triblock copolymers and four‐arm star block copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 635–652, 2009     

ATRP of methyl methacrylate using a novel binol ester‐based bifunctional initiator

Novel bifunctional initiators [1,1′‐Bi‐2‐naphthol bis(2‐bromo‐2‐methylpropionate); (R)‐, (S)‐, and racemic‐] were synthesized from the esterification of 1,1′‐bi‐2‐naphthol and used as initiators in atom transfer radical polymerization (ATRP) in conjunction with N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA), and copper (I) bromide or copper (I) chloride. The initiators synthesized were completely characterized by UV, FTIR, NMR, and Mass spectroscopies. A detailed investigation of the ATRP of methyl methacrylate (MMA) with the bifunctional initiators (BBiBN) along with CuBr or CuCl/PMDETA catalyst system in anisole was carried out at 30 °C. Thus, MMA polymerization is shown to proceed with first‐order kinetics, with predicted molecular weight, and narrow polydispersity indices. The ATRP of glycidyl methacrylate (GMA) and tert‐butyl acrylate (tBA) were also performed with BBiBN initiator in conjunction with CuBr/PMDETA catalyst system. The polymerization of GMA was carried out at 30 °C, but tBA was polymerized at 60 °C. Gel permeation chromatography (GPC), FTIR, NMR, UV spectroscopies, and TGA were used for the characterization of the polymers synthesized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 902–915, 2004     

Synthesis of graft copolymers with polyisobutylene branch chains

<正>The copolymerization of 4-vinylbenzyl chloride(VBC) and vinyl acetate(VAC) was carried out in toluene at 75℃via radical polymerization using 2,2'-azo-bis-(isobutyronitrile)(AIBN) as an initiator.The random copolymers of poly(4-vinylbenzyl chloride-co-vinyl acetate)(P(VBC-co-VAC)) with number average molecular weight(M_n) from 2000 to 6900,relatively narrow molecular weight distribution(MWD,M_w/M_n ca.2.0) and with different copolymer composition of 4-vinylbenzyl chloride(VBC) from 17 mol%to 62 mol%could be obtained.The P(VBC-co-VAC) copolymers with an average number of 7 to 13 initiating sites of benzyl chloride per macromolecule could be used for the cationic polymerization of isobutylene(IB).The cationic polymerizations of IB were further conducted by using P(VBC-co-VAC) copolymers as macroinitiators in conjunction with TiCl_4 at -40℃in CH_2Cl_2.The effects of VBC/TiCl_4(molar ratio) on monomer conversion,M_n and MWD of the resultant copolymers were investigated under 3 sets of conditions.It is found that P(VBC-co-VAC)-g-PIB copolymers with relatively narrow MWD(M_w/M_n ca.2.0) and with terminal tert-chlorine functional groups in branched PIB chains could be successfully synthesized when VBC/TiCl_4(molar ratio) was set in the range from 0.10 to 1.12.The unimodal GPC curve of the P(VBC-co-VAC)-g-PIB copolymers by RI detector was almost in harmony with the GPC curve by UV detector.The TEM image of the P(VBC-co-VAC)-g-PIB copolymer stained by RuO indicated that the copolymer formed a two-phase morphology with P(VBC-co-VAC)-rich domains of 20-100 nm in size tethered by PIB branch segments.     

Acceleration effect of N‐allyl group on thermally induced ring‐opening polymerization of 1,3‐benzoxazine

Thermally induced ring‐opening polymerization of monofunctional N‐allyl‐1,3‐benzoxazine 1a was compared with that of N‐(n‐propyl)‐1,3‐benzoxazine 1b to clarify an unexpected effect of allyl group to promote the polymerization, that is, in spite of the comparable bulkiness of allyl group to n‐propyl group, the polymerization of 1a was much faster than that of 1b . Such a difference in polymerization rate was also observed similarly in the comparison of thermally induced polymerization of a bifunctional N‐allyl‐benzoxazine 2a with that of a bifunctional N‐(n‐propyl) analogue 2b . These observations implied a certain contribution of an electron‐rich C? C double bond of the N‐ally group to promotion of the ring‐opening reaction of 1,3‐benzoxazine into the corresponding zwitterionic species, which would involve a mechanism to stabilize the cationic part of the zwitterionic species based on “neighboring group participation” of the C? C double bond. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010