Structural and electronic properties of graphite layers grown on SiC(0 0 0 1)

Photoelectron spectroscopy, low-energy electron diffraction, and scanning probe microscopy were used to investigate the electronic and structural properties of graphite layers grown by solid state graphitization of SiC(0 0 0 1) surfaces. The process leads to well-ordered graphite layers which are rotated against the substrate lattice by 30°. On on-axis 6H-SiC(0 0 0 1) substrates we observe graphitic layers with up to several 100 nm wide terraces. ARUPS spectra of the graphite layers grown on on-axis 6H-SiC(0 0 0 1) surfaces are indicative of a well-developed band structure. For the graphite/n-type 6H-SiC(0 0 0 1) layer system we observe a Schottky barrier height of ?_B,n = 0.3 ± 0.1 eV. ARUPS spectra of graphite layers grown on 8° off-axis oriented 4H-SiC(0 0 0 1) show unique replicas which are explained by a carpet-like growth mode combined with a step bunching of the substrate.     

Algebras with Collapsing Monomials

A semigroup S is called collapsing if there exists a positiveinteger n such that for every subset of n elements in S, atleast two distinct words of length n on these letters are equalin S. In particular, S is collapsing whenever it satisfies alaw. Let U(A) denote the group of units of a unitary associativealgebra A over a field k of characteristic zero. If A is generatedby its nilpotent elements, then the following conditions areequivalent: U(A) is collapsing; U(A) satisfies some semigrouplaw; U(A) satisfies the Engel condition; U(A) is nilpotent;A is nilpotent when considered as a Lie algebra.     

Preliminary estimate of the cost of ethanol production for ssf technology

The Solar Energy Research Institute (SERI) recently completed a detailed engineering and economic analysis of the simultaneous saccharification and fermentation (SSF) based wood-to-ethanol process. The reference-case design was based on a plant capacity of 1920 dry t/d and a wood cost of $42/dry t. For this case, the preliminary estimate of the production cost of the ethanol product is about $1.22/gal. The combined effects of optimizing SSF enzyme loading, increasing plant capacity to 10,000 dry t/d, and reducing wood cost to $34/dry t are to reduce the preliminary estimate of the production cost to about $0.95/gal. Other technological improvements may further reduce the production cost. Certain technical assumptions, inherent in the analysis, are being investigated further.

     

Determination of soluble phosphate,and total phosphorus in sea-water and of total phosphorus in marine muds

Summary The use ofp-methylaminophenol sulphate (metol) at 100 for the reduction of phosphomolybdic acid in the determination of phosphate in sea-water has a number of advantages over stannous chloride. The molybdenum blue colour once formed, is stable for several hours, and the calibration curve is not dependent upon the batches of reagent used; Beer's law is obeyed up to concentrations of at least 1 mg PO₄-P/l. The salt error is very small and the method has approximately 30% greater sensitivity in sea-water than has the stannous chloride method. Arsenic does not interfere at concentrations five times greater than its sea-water concentration. Iron and copper in moderate amounts do not interfere.Evaporation to dryness with a mixture of concentrated nitric and perchloric acids, followed by colorimetric determination of inorganic phosphate, is employed for the determination of total phosphorus in sea-water and marine muds. The method shows a coefficient of variation of ca. 2% with sea-water containing 60g P/l.

---

Zusammenfassung Die Anwendung von p-Methylaminophenolsulfat (Metol) bei 100 für die Reduktion von PhosphomolybdÄnsÄure bei der Bestimmung der Phosphate in Meerwasser hat gegenüber Zinn(II)chlorid eine Reihe von Vorteilen. Das einmal gebildete MolybdÄnblau ist für einige Stunden stabil und die Eichkurve nicht von der angewendeten Menge Reagens abhÄngig; das Beersche Gesetz ist für Konzentrationen bis zu 1 mg Phosphat-Phosphor/l gültig. Der Salzfehler ist sehr klein und die Methode für Meerwasser etwa um 30% empfindlicher als die Zinn(II)chloridmethode. Arsen stört bei Konzentrationen, die fünfmal größer sind als in Meerwasser, nicht. Eisen und Kupfer in mÄßigen Mengen stören gleichfalls nicht.Für die Bestimmung des Gesamtphosphors in Meerwasser und Seeschlamm wird mit einer Mischung von konz. SalpetersÄure und PerchlorsÄure zur Trockne verdampft und das anorganische Phosphat kolorimetrisch gemessen. Die Methode zeigt eine Schwankungsbreite von etwa 2% für Meerwasser mit 60g P/l.

---

Résumé L'emploi du sulfate de p-méthylaminophenol (métol) à 100 pour la réduction de l'acide phosphomolybdique lors du dosage des phosphates contenus dans l'eau de mer présente de multiples avantages sur celui du chlorure stanneux. Après sa formation, le bleu de molybdène reste stable pendant plusieurs heures et la courbe d'étalonnage ne varie pas avec le lot de réactif employé; la loi deBeer est applicable jusqu'à des concentrations au moins égales à 1 mg de phosphore phosphorique par litre. L'erreur de sel est très faible et la sensibilité de la méthode appliquée à l'eau de mer est environ 30% plus élevée que la méthode au chlorure stanneux. L'arsenic ne gÊne pas mÊme pour des concentrations cinq fois supérieures à celle qu'il atteint dans l'eau de mer. Des teneurs modérées de fer et de cuivre n'apportent pas de perturbation. On évapore à siecité en présence d'un mélange d'acides nitrique et perchlorique concentrés puis on effectue une détermination colorimétrique des phosphates minéraux pour doser le phosphore total de l'eau de mer et des boues marines. La méthode est sujette à des variations d'environ 2% pour leau de mer contenant 60 g de phosphore par litre.

     

Anomalous grazing incidence small-angle x-ray scattering studies of platinum nanoparticles formed by cluster deposition

The size evolution of platinum nanoparticles formed on a SiO2/Si(111) substrate as a function of the level of surface coverage with deposited clusters has been investigated. The anisotropic shapes of sub-nanometer-size nanoparticles are changed to isotropic on the amorphous substrate as their sizes increased. Using anomalous grazing incidence small-angle x-ray scattering (AGISAXS), the scattering from nanoparticles on the surface of a substrate is well separated from that of surface roughness and fluorescence. We show that AGISAXS is a very effective method to subtract the background and can provide unbiased information about particle sizes of less than 1 nm.