Determining PCB desorption behaviour on sediments with SFE and investigating the dependency of selective fractions on sediment characteristics

A method for studying PCB desorption behaviour from sediments using supercritical fluid extraction (SFE) and pressurized liquid extraction (PLE) is presented. Four sediments were investigated and extracted with supercritical carbon dioxide employing increasingly harsher extraction conditions ranging from 40°C and 12?MPa to 100°C and 36.5?MPa. To ensure quantitative extractions, the remaining SFE residues were also extracted with PLE. Resulting profiles identified at least three different PCB fractions within the four sediments. Furthermore, a distinct fraction was obtained with extraction for 2?h at 40°C and 36.5?MPa. This fraction has previously been found to correlate well with bioavailable fractions. The dependency of this fraction on sediment total organic carbon (TOC) was investigated, both for sediments examined in this study as well as for previously reported values using the same extraction conditions. It was found that TOC does not correlate to selective SFE, which indicates that the use of TOC to predict bioavailability is questionable.     

Quantitative aspects of analyzing small molecules – monitoring singly or doubly charged ions? A case study of ximelagatran

Precision, reproducibility and lower limit of quantitation (LLOQ) are important characteristics of a quantitative method. We have investigated these properties for Ximelagatran (Xi), which has a high tendency to form doubly charged ions in electrospray ionization (ESI), by studying the percentage of doubly charged species formed when varying the formic acid (FA) concentration, analyte concentration, amount of organic modifier and flow rate. It was found that the percentage of [Xi + 2H]²⁺ can be controlled to be more than 90% or less than 10% by varying the amount of FA present, and that the change between these values is dramatic. Furthermore, the percentage of [Xi + 2H]²⁺ formed decreases with increased analyte concentration and increased flow rate. No apparent relationship with the amount of organic modifier was found. The results have the implication that, by carefully controlling the selected parameters, the LLOQ, precision and reproducibility can be improved. We have compared the fragmentation of the singly and doubly charged species and concluded that the [Xi + 2H]²⁺ ion is more inclined to undergo fragmentation than [Xi + H]⁺. As a consequence, unusual instrumental settings had to be used for the experiments. The fragmentation patterns are to a great extent similar, but the doubly charged species is more inclined to generate low‐mass product ions. Copyright © 2010 John Wiley & Sons, Ltd.     

Selective pressurized liquid extraction of polychlorinated biphenyls in sediment.

A selective pressurized liquid extraction procedure (SPLE) was developed for a fast determination of polychlorinated biphenyls in sediment. The final method was performed at 100 degrees C with heptane/dichloromethane (90:10, v/v) as extraction solvent for 2x5 min. Sulfuric acid impregnated silica was placed downstream of the sample in the extraction cell to remove interfering components. This simultaneous extraction/clean-up was performed in 20 min, with an average congener recovery of 92% compared to a classical 24 h Soxhlet methodology and 2 h of external manual clean-up.     

Evaluation of PLE exhaustiveness for the extraction of PCBs from sediments and the influence of sediment characteristics

Pressurized liquid extractions were performed on eight sediments in order to investigate if a modified US EPA method (100 °C, 100 bar, n-heptane/acetone (1:1), 2 × 5 min) provided exhaustive extractions of polychlorinated biphenyls (PCBs) from sediment, and to study if the extractability of PCBs from the different sediments was affected by characteristics of the sediment. The recovery from the eight native sediments, contaminated in nature, was between 96.4% and 98.9%, as an average of the recoveries from 10 PCB congeners. Hundred percent recovery was defined as the sum of two consecutive extractions (2 × 5 min each) at the stated conditions. The recoveries of the individual congeners were above 94%, except for one congener in one sediment, which had a recovery of 92%. When the recoveries and different characteristics of the sediments were compared, no correlation appeared between recoveries and sediment PCB concentration, total organic carbon (TOC), soot carbon (SC) or amorphous carbon (AC). The fact that carbon did not influence the extractions was somewhat surprising, since previous experiments have indicated a connection. Instead, statistically significant (p < 0.05) correlations were observed for water content and carbon/nitrogen (C/N) ratio. The decrease in recoveries with decreased water content was attributed to less access of the solvent to the analytes due to less matrix swelling. The lowered recoveries with increased C/N ratio can indicate that a difference in structure of the organic matter exists, which influences the binding strength between the analytes and the matrix. The difference in structure can possibly be explained by different origin of the organic matter or by aging effects. Overall the method was found to be exhaustive and the excellent recoveries show that sediment characteristics do not influence the extractions markedly.     

Swedish employment offices: A new model for evaluating effectiveness

We measure how well Swedish employment offices perform in delivering the services required of them by the Swedish government. In contrast to earlier studies we use a dynamic efficiency framework, which allows us to better model the intertemporal nature of these services, explicitly allowing for placements of intermediate nature across periods. Rather than using second stage analysis to assess the effects of varying local labor market conditions and differences in client characteristics on performance, we include a measure of the office’s expected work load directly in the model. This measure, derived from duration analysis, is designed to capture the variation across offices in resources needed before an average individual can obtain employment. It is estimated from the characteristics of all unemployed individual and local labor market conditions.     

Selective pressurized liquid extraction for multi-residue analysis of organochlorine pesticides in soil

A selective pressurized liquid extraction (SPLE) procedure capable of performing simultaneous extraction and clean-up has been demonstrated for multi-residue analysis of organochlorine pesticides (OCPs) in soil. The final method was performed at 100 degrees C for 3 x 10 min using acetone/n-heptane (1:1, v/v). Florisil was placed inside the extraction cell downstream the sample to remove interfering compounds. Extraction of two soil samples by SPLE gave a recovery which was over 80% for beta-endosulfan, endosulfan sulfate, p,p'-DDT and p,p'-DDE compared to PLE with off-line clean-up. The same trend was observed when applying the SPLE method to a certified reference soil sample (CRM 811-050) containing 13 OCPs, where the SPLE method gave 80-90% recovery vis-à-vis the PLE method with off-line clean-up. Feasibility of the SPLE method was further demonstrated by applying it to five real soil samples collected in Ethiopia.     

Polyelectrolyte multilayers on wood fibers: influence of molecular weight on layer properties and mechanical properties of papers from treated fibers

This paper compares the influence of the molecular weight of polylelectrolytes forming polyelectrolyte multilayers (PEM) on wood fibers on adhesion and paper strength. Sheets were made from fibers treated with poly(allylamine hydrochloride) (PAH)/poly(acrylic acid) (PAA) of molecular mass 70,000 and 240,000, respectively, and of poly(dimethyldiallylammonium chloride) (PDADMAC)/poly(styrene sulfonate) (PSS) of molecular mass 30,000 and 80,000, respectively. The results were compared to what has recently been reported for PEM formation on fibers using a low-molecular-mass combination of PAH and PAA and a high-molecular-mass combination of PDADMAC/PSS. There was a less significant improvement in the case of the low-molecular-mass PDADMAC/PSS and the high-molecular-mass PAH/PAA. The adsorbed amounts of PAH and PDADMAC were also determined, showing a lower adsorbed amount of the low-molecular-mass PAH than of the high-molecular-mass PDADMAC. The amount of low-molecular-mass PDADMAC was similar to that found for high-molecular-mass PDADMAC/PSS. Individual fibers were partly treated and studied, showing a less significant decrease in wettability with low-molecular-mass PDADMAC/PSS than with the high-molecular-mass combination. The effect of the molecular weight on the adhesion was discussed in terms of the structure and wettability of the PEMs.