Assessment of Noise Exposure of Sawmill Workers in Southwest,Nigeria

Economic wood processing employs the use of industrial machines for cutting, shaping, milling, and sawing timber, thereby leading to the generation of high levels of noise. Published data from empirical studies have categorized noise as an environmental hazard of global significance. Furthermore, noise exposure limits for different industries and all the industrial machines available has not been formally established as it presently exists in developed nations around the world. Therefore, this study assessed the daily exposure of sawmills workers to noise in Southwestern Nigeria. Reconnaissance surveys were first carried out in Osun, Oyo, Ondo, Ekiti, Lagos, and Ogun States to select sawmills that were fully operational and fit for the study. Two fully functional sawmills in two cities of each State were eventually selected for data collection, making a total of 24 sawmills, while the Circular Machines (CM), Planer Machines (PM), and Band-saw Machines (BM) were the machines in each sawmill considered. Two machines each of CM, PM, and BM were considered in each sawmill, making a total of forty-eight (48) machines each of CM, PM, and BM. Sound data were collected between 7 am and 7 pm each day for six days (between Monday and Saturday) using Extech 407732 sound level meter and all stabilized measurements were taken three times at different intervals. The data collected were in three different periods: Machine No-work Period (NP_m), Machine Idle Period (IP_m), and Machine Working Period (WP_m). A two–way Analysis of Variance (ANOVA) was carried out at P < 0.05 to determine whether there is a significant difference in the sound level average before and after the break, for both the idle and working periods of the three machines considered. This was also done to determine whether there is a significant difference between the sound level average of the results collected during idle and working periods of the three machines. Noise Pollution Levels (L_np) ranged from 83.20 dB (PM) to 107.65 (BM) and 93.42 (CM and PM) – 116.00 (BM) respectively, while IP_m also gave the least noise pollution level of 95.79 dB and WP_m gave the highest level of 102.88 dB. The results revealed that all the machines’ L_np values in the working period are more than the 90 dB acceptable limit the recommendation value of 90 dB while 89.6% of CMs, 75% of PMs, and 89.6% of BM had their L_np above 90 dB in the idle period respectively. The minimum and the maximum noise dose levels for IP_m, WP_m and overall are 0.09 (BM) and 2.37 (CM), 0.50 (CM), and 4.77 (PM) and 0.69 (BM) and 6.64 (PM) respectively. The study found out that the fundamental contributing factors to the high noise levels in sawmills are poor machine maintenance, use of old and obsolete machines, poor housekeeping strategy, limited space, workers’ negligence, lack of PPE, and lack of occupational safety training. The study recommends that proper workplace practices such as use of personal protective equipment, new and modern machines, training, and occupational safety programmes be implemented in the considered sawmills.     

Detecting and classifying outliers in big functional data

Advances in Data Analysis and Classification - We propose two new outlier detection methods, for identifying and classifying different types of outliers in (big) functional data sets. The proposed...     

Conductivity as a Sensor for Monitoring Relative Magnesium Corrosion Rates in Real‐time,in Serum‐containing Media under Cell Culture Conditions

Because controlling the corrosion rate of magnesium metal will be crucial to the success of biomedical implants containing pure magnesium or magnesium alloys, many ways have been sought to improve in vitro tests to analyze corrosion rates, and also to identify new methods of preparing or post‐processing magnesium. In this work, for an in vitro assay, we explored the use of a commercially available conductivity sensor to study magnesium corrosion under cell culture conditions that duplicate many physiologically appropriate parameters. With this sensor, we studied the corrosion of two previously untested magnesium single crystal samples that differed in surface treatments that could alter corrosion rates. The results show that the relative conductivity changes in (mS/cm) over the total time of immersion were proportional to the corrosion rates in (mm/y) and also to the total magnesium released, as detected by inductively coupled plasma mass spectrometry (ICP‐MS).     

A first‐principles study of diatomic NiAl: Ground state,structure, and spectroscopic constants

A computational study of diatomic NiAl is reported. Molecular properties evaluated include the equilibrium bond length (r_e), equilibrium stretching frequency (ω_e), doublet‐quartet energy splitting, and nickel‐aluminum bond strength. Several interesting conclusions have resulted from this research. First, convergence in calculated properties is smoother with recently reported correlation consistent basis sets than earlier basis sets for Ni and Al. Second, with the exception of bond strength, basis set limit properties extrapolated using correlation basis sets are in agreement with reported data. Third, this research suggests that caution may be needed with regard to the use of DFT for developing interatomic potentials for larger scale simulations. For example, B97‐1 showed better agreement with reported r_e for ²NiAl than B3LYP. However, the situation was reversed for the calculation of ω_e. With respect to bond strength, the situation is unclear due to the scatter among experiment and calculations. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

ORGANOPHOSPHORUS COMPOUNDS AS POTENTIAL FUNGICIDES. PART I. N-(ω-GUANI-DINOALKYL)AMINOALKANEPHOSPHONIC ACIDS AND THEIR AMINOPHOSPHONIC PRECURSORS: PREPARATION,NMR SPECTROSCOPY,AND FAST ATOM BOMBARDMENT MASS SPECTROMETRY

Abstract

N-(ω-Aminoalkyl)- and N-(ω-guanidinoalkyl)-aminoalkanephosphonic acids have been prepared from α, ω-diaminoalkanes by reaction with chloromethanephosphonic acid (or an ester of a halogeno-alkanephosphonic acid), followed by treatment with S-methylisothiouronium chloride. Ethylene diamine yielded 1-phosphonomethyl-2-iminoimidazolidine. A number of 1:1 salts of the α, ω-diamines and chloromethanephosphonic acid are also reported. Doubly charged zwitterionic structures are assigned to both ω-amino and ω-guanidino compounds on the basis of ³¹P and ¹³C nmr data. Thus the addition of an excess of acid (D₂SO₄) causes the ³¹P chemical shift to move to higher field, from ca. 8 to 14 ppm, whilst ¹ Jpc increases from ca. 130 to 150 Hz. The ¹H and ¹³C chemical shifts of the terminal methylene groups in the polymethylene chain are unaffected by acidification.

Fast atom bombardment mass spectrometry gives rise to characteristic [M + H]⁺ ions, frequently as the base peak, and to fragmentations involving the loss of phosphorous acid, or the formation of ions resulting from carbon-nitrogen or carbon-carbon cleavage. The compounds show activity against a number of fungal pathogens and other microbial organisms.     

Generalized reduced-order hybrid combination synchronization of three Josephson junctions via backstepping technique

In this paper, active backstepping design technique is applied to achieve reduced-order hybrid combination synchronization and reduced-order projective hybrid combination synchronization of three chaotic systems consisting of: (i) two third-order chaotic Josephson junctions as drives and one second-order chaotic Josephson junction as response system; (ii) one third-order chaotic Josephson junction as the drive and two second-order chaotic Josephson junctions as the slaves. Numerical simulations are performed to verify the feasibility and effectiveness of the analytical results. Reduced-order combination synchronization has more valuable practical applications to information processing in physical, biological, and social systems than the normal one master system and one slave system synchronization scheme.     

Isothiourea‐Catalysed Acylative Kinetic Resolution of Aryl–Alkenyl (sp2 vs. sp2) Substituted Secondary Alcohols

The non‐enzymatic acylative kinetic resolution of challenging aryl–alkenyl (sp² vs. sp²) substituted secondary alcohols is described, with effective enantiodiscrimination achieved using the isothiourea organocatalyst HyperBTM (1 mol %) and isobutyric anhydride. The kinetic resolution of a wide range of aryl–alkenyl substituted alcohols has been evaluated, with either electron‐rich or naphthyl aryl substituents in combination with an unsubstituted vinyl substituent providing the highest selectivity (S=2–1980). The use of this protocol for the gram‐scale (2.5 g) kinetic resolution of a model aryl–vinyl (sp² vs. sp²) substituted secondary alcohol is demonstrated, giving access to >1 g of each of the product enantiomers both in 99:1 e.r.     

Polymer‐coated Boron Doped Diamond Optically Transparent Electrodes for Spectroelectrochemical Sensors

Spectroelectrochemical sensors combine electrochemistry, spectroscopy, and partitioning into a film to provide improved selectivity for the target analyte. The sensor usually consists of an optically transparent electrode (OTE) coated with a charge selective polymer film. The polymer film is chosen to pre‐concentrate analyte at the OTE surface to improve the sensitivity and provide selectivity against like charged interferences. OTEs such as Indium Tin Oxide (ITO) have been used extensively for spectroelectrochemical sensors, but little is known about the applicability of such sensors using other OTE materials, such as Boron Doped Diamond (BDD). One distinct advantage of BDD OTEs over ITO OTEs is their significant increase in sensitivity for organic compounds, such as 4‐aminophenol and hydroquinone. We have developed absorption and fluorescence‐based sensing methods with a BDD OTE coated with a sulfonated ionomer film, Nafion. This is demonstrated with tris(2,2′‐bipyridyl)ruthenium(II) ion [Ru(bpy)₃²⁺] using an attenuated total reflectance (ATR) flow cell setup for both absorption and fluorescence. With a Nafion coated BDD optically transparent thin layer electrode (OTTLE), we developed a fluorescence based sensor for a common polyaromatic hydrocarbon (PAH), 1‐hydroxypyrene (1‐pyOH), achieving a detection limit of 80 nM (17 ppb). This work manifests new sensing applications while broadening the use of spectroelectrochemistry, OTEs, and BDD as an electrode material.     

Protonation of Chloro-, Bromo- and Iodo-pentacyanocobaltate(III) Complexes

The reactions between Fe(Phen)₃²⁺[phen = tris-(1,10) phenanthroline] and Co(CN)₅X³⁻ (X = Cl, Br or I) have been studied in aqueous acidic solutions at 25 °C and ionic strength in the range I = 0.001–0.02 mol dm⁻³ (NaCl/HCl). Plots of k₂ versus √I, applying Debye–Huckel Theory, gave the values −1.79 ± 0.18, −1.65 ± 0.18 and 1.81 ± 0.10 as the product of charges (Z_AZ_B) for the reactions of Fe(Phen)₃²⁺ with the chloro-, bromo- and iodo- complexes respectively. Z_AZ_B of ≈ −2 suggests that the charge on these Co^III complexes cannot be −3 but is −1. This suggests the possibility of protonation of these Co^III complexes. Protonation was investigated over the range [H⁺] = 0.0001 −0.06 mol dm⁻³ and the protonation constants K_a obtained are 1.22 × 10³, 7.31 × 10³ and 9.90 × 10² dm⁶ mol⁻³ for X = Cl, Br and I, respectively.     

Mass spectrometry of transition-metal π-complexes. III—a study of an iron-coordinated tautomer of phenol

A study of the fragmentation of the \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{\left({{\rm C}_{\rm 6} {\rm H}_{\rm 6} {\rm O}} \right){\rm Fe}} \right]_{}^{_.^ + } $\end{document} ion formed from two different precursors suggests that the ions adopt different structures over that part of the energy distribution giving rise to decomposition in the ion source.