Trichilianones A-D,Novel Cyclopropane-Type Limonoids from Trichilia adolfi

The fractionation of an ethanol extract of the bark of Trichilia adolfi yielded four novel limonoids (trichilinones A-D, 1–4), with five fused rings and related to the hortiolide-type limonoids. Starting with an ε-lactone, which is α,β-unsaturated in trichilinones A and D (1 and 4), attached to a tetrahydrofuran ring that is connected to an unusual bicyclo [5.1.0] hexane system, joined with a cyclopentanone with a 3-furanyl substituent [(2-oxo)-furan-(5H)-3-yl in trichilinone D (4)], the four compounds isolated display a new 7/5/3/5/5 limonoid ring system. Their structures were established based on extensive analysis of NMR spectroscopic data. As the crude extract possessed anti-leishmanial properties, the compounds were assayed for cytotoxic and anti-parasitic activities in vitro in murine macrophages cells (Raw 264.7) and leishmania promastigotes (L. amazoniensis and L. braziliensis), respectively. The compounds showed moderate cytotoxicity (approximately 70 μg/mL), but are not responsible for the leishmanicidal effect of the extract.     

Multivariate analysis of extremely large ToFSIMS imaging datasets by a rapid PCA method

Principal component analysis (PCA) and other multivariate analysis methods have been used increasingly to analyse and understand depth profiles in X‐ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and secondary ion mass spectrometry (SIMS). These methods have proved equally useful in fundamental studies as in applied work where speed of interpretation is very valuable. Until now these methods have been difficult to apply to very large datasets such as spectra associated with 2D images or 3D depth‐profiles. Existing algorithms for computing PCA matrices have been either too slow or demanded more memory than is available on desktop PCs. This often forces analysts to ‘bin’ spectra on much more coarse a grid than they would like, perhaps even to unity mass bins even though much higher resolution is available, or select only part of an image for PCA analysis, even though PCA of the full data would be preferred. We apply the new ‘random vectors’ method of singular value decomposition proposed by Halko and co‐authors to time‐of‐flight (ToF)SIMS data for the first time. This increases the speed of calculation by a factor of several hundred, making PCA of these datasets practical on desktop PCs for the first time. For large images or 3D depth profiles we have implemented a version of this algorithm which minimises memory needs, so that even datasets too large to store in memory can be processed into PCA results on an ordinary PC with a few gigabytes of memory in a few hours. We present results from ToFSIMS imaging of a citrate crystal and a basalt rock sample, the largest of which is 134GB in file size corresponding to 67 111 mass values at each of 512 × 512 pixels. This was processed into 100 PCA components in six hours on a conventional Windows desktop PC. © 2015 The Authors. Surface and Interface Analysis published by John Wiley & Sons Ltd.     

A concise and stereoselective chemoenzymatic synthesis of Sitophilate,the male-produced aggregation pheromone of Sitophilus granarius (L.)

(2S,3R)-Sitophilate, the male-produced aggregation pheromone of the granary weevil Sitophilus granarius (L.) was prepared stereoselectively using a novel chemoenzymatic approach in 50% overall yield. The synthetic design was based on an enantioselective fungal reduction of ethyl 2-methyl-3-oxopentanoate with a strain of Aureobasidium pullulans (CCM H1), followed by a Mitsunobu inversion at C3. The last step in the synthetic sequence was a lipase-mediated transesterification using the commercially available Candida antarctica B lipase (CaL B, Novozym 435) using microwave irradiation under solvent-free conditions.     

Determination of organochlorine pesticides (OCPs) in breast milk from Rio Grande do Sul,Brazil, using a modified QuEChERS method and gas chromatography-negative chemical ionisation-mass spectrometry

ABSTRACT

The food chain is the main source of exposure to humans by organochlorine pesticides (OCPs) due to the bioaccumulation. Breast milk can accumulate OCPs, so this matrix is often used as an environmental bioindicator. The currently available methods for the determination of several OCPs and metabolites in breast milk involve, in general, multi-step sample preparation and quantification techniques with low selectivity, high cost and much time and labour. Thus, a fast and efficient method based on sample preparation using the quick, easy, cheap, effective, rugged and safe (QuEChERS) method combined with gas chromatography coupled to mass spectrometry with negative chemical ionisation (GC-NCI-MS) was developed, validated and applied for determination of 16 OCPs and metabolites in breast milk samples. The extract was cleaned by dispersive solid-phase extraction (d-SPE) using MgSO₄ and C18, evaporated in a Turbovap® system, redissolved and analysed by GC-NCI-MS. The method was validated showing acceptable recoveries (72–118%) and precision (RSD <19%). Method limits of detection (LODs) and quantification (LOQs) ranged from 0.75 to 7.5 ng g^?1 and from 2.5 to 25 ng g^?1 lipid, respectively. The method was successfully applied to 20 samples of breast milk from different regions of the Rio Grande do Sul state, Brazil, of which 75% contained residues below the LOQs.     

A green-emitting α-substituted β-diketonate Tb3+ phosphor for ultraviolet LED-based solid-state lighting

The α-substituted β-diketonate [Ln(3Cl-acac)₃(H₂O)₂] [Ln = Tb, Gd] complexes (with 3Cl-acac^– being 3-chloro-2,4-pentanedionate) were characterized by elemental analysis, infrared, ultraviolet (UV)-visible and photoluminescence spectroscopies. For comparison purposes regarding photoluminescence, the well-known [Tb(acac)₃(H₂O)₂] complex was also synthesized. By considering the phosphorescence spectra of [Gd(3Cl-acac)₃(H₂O)₂], the effect of chloride replacement of hydrogen on the triplet state energy of the 3Cl-acac ligand was revealed. To support the interpretation and rationalization of the experimental results, Time-dependent DFT calculations were performed on Tb(3Cl-acac)₃(H₂O)₂. Additionally, the possibility of Tb(3Cl-acac)₃(H₂O)₂ to be used as potential green-emitting phosphor material for solid-sate light emitting diodes was evaluated. A prototype was successfully fabricated coating a near-UV LED (370 nm) with the Tb(3Cl-acac)₃(H₂O)₂ complex.     

Microwave-assisted rapid and efficient synthesis of C-alkyl imidazoisoquinolinone derivatives

The synthesis of a set of 10-benzyl-2,3-dihydroimidazo[1,2-b]isoquinolin-5(1H)-one and 5-oxo-imidazo[1,2-b]isoquinolin-10-yl)-N-phenylacetamide derivatives was achieved by exposing the corresponding alkylating agent and imidazoisoquinolinone to microwave irradiation and traditional oil bath heating in the presence of K₂CO₃ and DMAP. The microwave technique as well as DMAP as base accelerated the alkylation reaction for 2-6 min giving 79-88% yields.     

A finite strain contact model for mixed lubricated surfaces in forming processes

For an accurate simulation of forming processes, it is of paramount importance to model the different lubrication regimes that can develop at the contact interface. These might vary from zone to zone of the forming piece, and from one regime to another, resulting in forces of different nature and magnitude. In these cases, the use of the classical Coulomb friction law will be clearly not sufficient to capture, in a suitable manner, the variety of forces applied on the forming piece.     

In situ ion beam sputter deposition and X‐ray photoelectron spectroscopy (XPS) of multiple thin layers under computer control for combinatorial materials synthesis

Deposition of ultra‐thin layers under computer control is a frequent requirement in studies of novel sensors, materials screening, heterogeneous catalysis, the probing of band offsets near semiconductor junctions and many other applications. Often large‐area samples are produced by magnetron sputtering from multiple targets or by atomic layer deposition (ALD). Samples can then be transferred to an analytical chamber for checking by X‐ray photoelectron spectroscopy (XPS) or other surface‐sensitive spectroscopies. The ‘wafer‐scale’ nature of these tools is often greater than is required in combinatorial studies, where a few square centimetres or even millimetres of sample is sufficient for each composition to be tested. The large size leads to increased capital cost, problems of registration as samples are transferred between deposition and analysis, and often makes the use of precious metals as sputter targets prohibitively expensive. Instead we have modified a commercial sample block designed to perform angle‐resolved XPS in a commercial XPS instrument. This now allows ion‐beam sputter deposition from up to six different targets under complete computer control. Ion beam deposition is an attractive technology for depositing ultra‐thin layers of great purity under ultra‐high vacuum conditions, but is generally a very expensive technology. Our new sample block allows ion beam sputtering using the ion gun normally used for sputter depth‐profiling of samples, greatly reducing the cost and allowing deposition to be done (and checked by XPS) in situ in a single instrument. Precious metals are deposited cheaply and efficiently by ion‐beam sputtering from thin metal foils. Samples can then be removed, studied and exposed to reactants or surface treatments before being returned to the XPS to examine and quantify the effects. Copyright © 2016 The Authors Surface and Interface Analysis Published by John Wiley & Sons Ltd.     

New Features in the Lipid A Structure of <Emphasis Type="Italic">Brucella suis</Emphasis> and <Emphasis Type="Italic">Brucella abortus</Emphasis> Lipopolysaccharide

Brucellaceae are Gram-negative bacteria that cause brucellosis, one of the most distributed worldwide zoonosis, transmitted to humans by contact with either infected animals or their products. The lipopolysaccharide exposed on the cell surface has been intensively studied and is considered a major virulence factor of Brucella. In the last years, structural studies allowed the determination of new structures in the core oligosaccharide and the O-antigen of this lipopolysaccharide. In this work, we have reinvestigated the lipid A structure isolated from B. suis and B. abortus lipopolysaccharides. A detailed study by MALDI-TOF mass spectrometry in the positive and negative ion modes of the lipid A moieties purified from both species was performed. Interestingly, a new feature was detected: the presence of a pyrophosphorylethanolamine residue substituting the backbone. LID-MS/MS analysis of some of the detected ions allowed assurance that the Lipid A structure composed by the diGlcN3N disaccharide, mainly hexa-acylated and penta-acylated, bearing one phosphate and one pyrophosphorylethanolamine residue.

Open image in new window

Graphical abstract ?

     

On the asymptotic behavior of general projection-pursuit estimators under the common principal components model

The common principal components model for several groups of multivariate observations assumes equal principal axes among the groups. Robust estimators can be defined replacing the sample variance by a robust dispersion measure. This paper studies the asymptotic distribution of robust projection-pursuit estimators under a common principal components model.